Lenovo IdeaTab S6000 Hardware Maintenance Manual

Hide thumbs Also See for IdeaTab S6000:

Advertisement

IdeaTab S6000
Hardware
Maintenance
Manual

Advertisement

Table of Contents
loading

Summary of Contents for Lenovo IdeaTab S6000

  • Page 1 IdeaTab S6000 Hardware Maintenance Manual...
  • Page 2 First Edition (April 2013) © Copyright Lenovo 2013. All rights reserved. LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure.
  • Page 3: Table Of Contents

    Checking the internal battery status..21 Related service information .......23 Security ............... 23 Power management .......... 23 Activating/Deactivating the Display..23 Lenovo IdeaTab S6000 .......24 Specifications ............. 24 FRU replacement notices........25 Screw notices..........25 Removing and replacing an FRU....26 1010 Back cover..........
  • Page 4: About This Manual

    This manual is intended only for trained servicers who are familiar with Lenovo products. Use this manual to troubleshoot problems effectively. Before servicing a Lenovo product, make sure to read all the information under “Safety information” on page 1 and “Important service information”...
  • Page 5: Safety Information

    Safety information Safety information This chapter presents the following safety information that you need to get familiar with before you service a Lenovo computer: • “General safety” on page 2 • “Electrical safety” on page 3 • “Safety inspection guide” on page 5 •...
  • Page 6: General Safety

    Lenovo IdeaTab S6000 Hardware Maintenance Manual General safety Follow these rules below to ensure general safety: • Observe a good housekeeping in the area where the machines are put during and after the maintenance. • When lifting any heavy object: 1.
  • Page 7: Electrical Safety

    Safety information Electrical safety Observe the following rules when working on electrical equipments. Important: Use only approved tools and test equipments. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents. Many customers have rubber floor mats near their machines that contain small conductive fibers to decrease electrostatic discharges.
  • Page 8 Lenovo IdeaTab S6000 Hardware Maintenance Manual • Always look carefully for possible hazards in your work area. Examples of these hazards are moist floors, nongrounded power extension cables, power surges, and missing safety grounds. • Do not touch live electrical circuits with the reflective surface of a plastic dental mirror.
  • Page 9: Safety Inspection Guide

    4. Check for cracked or bulging batteries. 5. Remove the cover. 6. Check for any obvious non-Lenovo alterations. Use good judgment as to the safety of any non-Lenovo alterations. 7. Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage.
  • Page 10: Handling Devices That Are Sensitive To Electrostatic Discharge

    Lenovo IdeaTab S6000 Hardware Maintenance Manual Handling devices that are sensitive to electrostatic discharge Any computer part containing transistors or integrated circuits (ICs) should be considered sensitive to electrostatic discharge (ESD). ESD damage can occur when there is a difference in charge between objects. Protect against ESD damage by equalizing the charge so that the machine, the part, the work mat, and the person handling the part are all at the same charge.
  • Page 11: Safety Notices: Multilingual Translations

    Safety information Safety notices: multilingual translations The safety notices in this section are provided in English, French, German, Hebrew, Italian, Japanese, and Spanish. Safety notice 1 Before the computer is powered on after FRU replacement, make sure all screws, springs, and other small parts are in place and are not left loose inside the computer.
  • Page 12 Lenovo IdeaTab S6000 Hardware Maintenance Manual Safety notice 2 DANGER Some standby batteries contain a small amount of nickel and cadmium. Do not disassemble a standby battery, recharge it, throw it into fire or water, or short-circuit it. Dispose of the battery as required by local ordinances or regulations.
  • Page 13 Safety information Safety notice 3 DANGER The battery pack contains small amounts of nickel. Do not disassemble it, throw it into fire or water, or short-circuit it. Dispose of the battery pack as required by local ordinances or regulations. Use only the battery in the appropriate parts listing when replacing the battery pack.
  • Page 14 Lenovo IdeaTab S6000 Hardware Maintenance Manual Safety notice 4 DANGER The lithium battery can cause a fire, an explosion, or a severe burn. Do not recharge it, remove its polarized connector, disassemble it, heat it above 100°C (212°F), incinerate it, or expose its cell contents to water. Dispose of the battery as required by local ordinances or regulations.
  • Page 15 Safety information Safety notice 5 If the LCD breaks and the fluid from inside the LCD gets into your eyes or on your hands, immediately wash the affected areas with water at least for 15 minutes. Seek medical care if any symptoms caused by the fluid are present after washing.
  • Page 16 Lenovo IdeaTab S6000 Hardware Maintenance Manual Safety notice 6 DANGER To avoid shock, do not remove the plastic cover that protects the lower part of the inverter card. Afin d’éviter tout risque de choc électrique, ne retirez pas le cache en plastique protégeant la partie inférieure de la carte d’alimentation.
  • Page 17 Safety information Safety notice 8 DANGER Before removing any FRU, turn off the computer, unplug all power cords from electrical outlets, remove the battery pack, and then disconnect any interconnecting cables. Avant de retirer une unité remplaçable en clientèle, mettez le système hors tension, débranchez tous les cordons d’alimentation des socles de prise de courant, retirez la batterie et déconnectez tous les cordons d’interface.
  • Page 18: Laser Compliance Statement

    Lenovo IdeaTab S6000 Hardware Maintenance Manual Laser compliance statement Some models of Lenovo computer are equipped from the factory with an optical storage device such as a CD-ROM drive or a DVD-ROM drive. Such devices are also sold separately as options. If one of these drives is installed, it is certified in the U.S.
  • Page 19 Safety information A CD-ROM drive, a DVD-ROM drive, or any other storage device installed may contain an embedded Class 3A or Class 3B laser diode. Note the following: DANGER Emits visible and invisible laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam.
  • Page 20: Important Service Information

    To download software fixes, drivers, and BIOS, follow the steps below: 1. Go to http://consumersupport.lenovo.com/. 2. Enter a serial number or select a product or use Lenovo smart downloading. 3. Select the BIOS/Driver/Applications and download. 4. Follow the directions on the screen and install the necessary software.
  • Page 21: Important Notice For Replacing A System Board

    Important service information Use the following strategy to prevent unnecessary expense for replacing and servicing FRUs: • If you are instructed to replace an FRU, but the replacement does not solve the problem, reinstall the original FRU before you continue. •...
  • Page 22: Important Information About Replacing Rohs Compliant Frus

    Electronic Equipment Directive (2002/95/EC) is a European Union legal requirement affecting the global electronics industry. RoHS requirements must be implemented on Lenovo products placed on the market after June 2006. Products on the market before June 2006 are not required to have RoHS compliant parts.
  • Page 23: General Checkout

    General checkout General checkout This chapter presents the following information: • “What to do first” on page 20 • “Power system checkout” on page 21 Before you go to the checkout, make sure to read the following important notes: Important notes: •...
  • Page 24: What To Do First

    Lenovo IdeaTab S6000 Hardware Maintenance Manual What to do first When you do return an FRU, you must include the following information in the parts exchange form or parts return form that you attach to it: 1. Name and phone number of servicer 2.
  • Page 25: Power System Checkout

    General checkout Power system checkout To verify a symptom, follow the steps below: 1. Turn off the computer. 2. Remove the battery pack. 3. Connect the AC adapter. 4. Make sure that power is supplied when you turn on the computer. 5.
  • Page 26 To open the Android Settings screen, do either of the following: – From the main Home screen, touch the Android Settings icon on Lenovo Launch Zone. The Android Settings screen is displayed. – Touch the application icon from the action bar and then touch Settings.
  • Page 27: Related Service Information

    Related service information Related service information This chapter presents the following information: • “Security” on page 23 • “Power management” on page 23 Security Security settings include: SCREEN SECURITY, SIM CARD LOCK (3G version only), PASSWORDS, DEVICE ADMINISTRATION and CREDENTIAL STORAGE.
  • Page 28: Lenovo Ideatab S6000

    • “FRU replacement notices” on page 25 • “Removing and replacing an FRU” on page 26 • “Locations” on page 36 • “Parts list” on page 39 Specifications The following table lists the specifications of the Lenovo IdeaTab S6000: Table 1. Specifications Feature Description Form Factor Size •...
  • Page 29: Fru Replacement Notices

    This section presents notices related to removing and replacing parts. Read this section carefully before replacing any FRU. Screw notices Loose screws can cause a reliability problem. In the Lenovo computer, this problem is addressed with special nylon-coated screws that have the following characteristics: •...
  • Page 30: Removing And Replacing An Fru

    Lenovo IdeaTab S6000 Hardware Maintenance Manual Removing and replacing an FRU This section presents exploded figures with the instructions to indicate how to remove and replace the FRU. Make sure to observe the following general rules: 1. Do not attempt to service any computer unless you have been trained and certified.
  • Page 31: 1010 Back Cover

    Lenovo IdeaTab S6000 1010 Back cover Figure 1. Removal steps of back cover Use a thin flat blade to carefully pry off the two speaker covers. Remove screws Step Screw (quantity) Color Torque M1.6 × 0.35 × 2.5mm, Phillips-flat head Black 0.8 ±...
  • Page 32 Lenovo IdeaTab S6000 Hardware Maintenance Manual Figure 1. Removal steps of back cover (continued) Insert the thin flat blade between the frame join near the power button, then carefully move the blade along the join to remove the back cover.
  • Page 33: 1020 Battery Pack

    Lenovo IdeaTab S6000 1020 Battery pack DANGER Only use the battery specified in the parts list for your computer. Any other battery could ignite or explode. For access, remove this FRU: • “1010 Back cover” on page 27 Figure 2. Removal steps of battery pack Hold the tab and lift the battery slightly.
  • Page 34: 1030 Sim Card And Sd Card

    Lenovo IdeaTab S6000 Hardware Maintenance Manual 1030 SIM card and SD card Figure 3. Removal steps of SIM card and SD card Remove SIM card and SD card from the card slot in the direction shown by arrows SIM Card...
  • Page 35: 1040 System Board

    Lenovo IdeaTab S6000 1040 System board Important notices for handling the system board: When handling the system board, bear the following in mind. • Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or composite.
  • Page 36 Lenovo IdeaTab S6000 Hardware Maintenance Manual Figure 4. Removal steps of system board Peel off the conductive cloth and insulating film as shown. Detach the back camera connector , sub board connector , touchpad connector , LCD connector . Peel off the speakers and vibrator .
  • Page 37 Lenovo IdeaTab S6000 Figure 4. Removal steps of system board (continued) Remove six screws g g g Step Screw (quantity) Color Torque M1.6 × 0.35 × 2.5mm, Phillips-flat head Black 0.8 ± 0.05kgf.cm Zine-Plated (6)
  • Page 38: 1050 Back Camera

    Lenovo IdeaTab S6000 Hardware Maintenance Manual 1050 Back camera For access, remove these FRUs in order: • “1010 Back cover” on page 27 • “1020 Battery pack” on page 29 • “1030 SIM card and SD card” on page 30 Figure 5.
  • Page 39: 1060 Sub Board

    Lenovo IdeaTab S6000 1060 Sub board For access, remove these FRUs in order: • “1010 Back cover” on page 27 • “1020 Battery pack” on page 29 • “1030 SIM card and SD card” on page 30 • “1040 System board” on page 31 Figure 6.
  • Page 40: Locations

    Lenovo IdeaTab S6000 Hardware Maintenance Manual Locations Front view Power button Earphone jack Microphone Front camera...
  • Page 41: Right-Side View

    Lenovo IdeaTab S6000 Right-side view Volume button HDMI Micro USB SD & SIM Card Slot...
  • Page 42: Back View

    Lenovo IdeaTab S6000 Hardware Maintenance Manual Back view Speaker Back camera...
  • Page 43: Parts List

    Lenovo IdeaTab S6000 Parts list This section presents the following service parts: • “Overall” on page 40 • “AC adapters” on page 44 • “USB Cable” on page 44 • “Power cords” on page 45 Notes: • Each FRU is available for all types or models, unless specific types or...
  • Page 44: Overall

    Lenovo IdeaTab S6000 Hardware Maintenance Manual Overall...
  • Page 45 Lenovo IdeaTab S6000...
  • Page 46 Lenovo IdeaTab S6000 Hardware Maintenance Manual Table 1. Parts list—Overall FRU no. CRU ID S6000 B-cover module_Black 90203016 S6000 B-cover module_Black_wifi 90203017 S6000 B-cover module_Black 90203062 S6000 B-cover module_Black_wifi_16G 90203063 S6000 B-cover module_Black_wifi_4G 90203064 S6000 battery holder conductive fabric 31503600 S6000 Celx/SDI L11C2P32 3.7V23Wh 2cell...
  • Page 47 Lenovo IdeaTab S6000 Table 1. Parts list—Overall (continued) FRU no. CRU ID S6000 Water proof foam-1 31504626 S6000 Water proof foam-2 31504627 S6000 sub-board conductive fabric 31504628 S6000 Speaker cosmetic parts 31503587 S6000 Dielectric film 31503589 S6000 Dielectric film 2...
  • Page 48: Ac Adapters

    Lenovo IdeaTab S6000 Hardware Maintenance Manual AC adapters Table 2. Parts list—3-pin AC adapters CRU ID GW AD835M26B15LF 5.2V2A US adapter 36200343 GW AD835M26B15LF 5.2V2A UK adapter 36200345 GW AD835M26B15LF 5.2V2A EU adapter 36200344 GW AD835M26B15LF 5.2V2A CN adapter 36200342 USB Cable Table 3.
  • Page 49: Power Cords

    Lenovo IdeaTab S6000 Power cords A Lenovo power cord for a specific country or region is usually available only in that country or region: Table 4. Parts list—3-pin power cords Region CRU ID 145000602 • SSD YD-118-1+IEC53RVV+SSD-3-2B-1 1m 145000600 •...
  • Page 50 Lenovo IdeaTab S6000 Hardware Maintenance Manual Table 4. Parts list—3-pin power cords (continued) Region CRU ID Brazil 145000564 • Longwell LP-46+H03VV-F+LS-18 1m Israel 145000563 • Longwell LP-41+H03VV-F+LS-18 1m 145000562 • Longwell LP-30B+SPT-2 18AWG+LS-18 1m 145000561 • Longwell LP-61L+H03VV-F+LS-18 1m Indian 145000560 •...
  • Page 51 Lenovo IdeaTab S6000 Table 11. Parts list—3-pin power cords (continued) Region CRU ID Korea 145000533 • Volex LP-486+KTLH03VV-F+LS-5 1m Australia 145000532 • Volex LP-23A+LFC-3R+LS-18 1m Taiwan 145000531 • Volex LP-71+VCTF+LS-33 1m Japan 145000530 • Volex LP-54+VCTF+LS-18 1m 145000525 • Volex LP-34A+H03VV-F+LS-18 1m...
  • Page 52 The result obtained in other operating environments may vary. Lenovo may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.
  • Page 53 Actual results may vary. Users of this document should verify the applicable data for their specific environment. Trademarks The following terms are either registered trademarks or trademarks of Lenovo in the United States and/or other countries: ® Lenovo ®...

Table of Contents