Download Print this page

X10 VR47A Owner's Manual

Video receiver for use with x10 wireless camera systems

Advertisement

Quick Links

Video Receiver for use with X10
Wireless Camera Systems
MODEL VR47A OWNER'S MANUAL

Advertisement

loading

Summary of Contents for X10 VR47A

  • Page 1 Video Receiver for use with X10 Wireless Camera Systems MODEL VR47A OWNER'S MANUAL...
  • Page 2: Controls And Connections

    100 feet away. The Camera converts video into wireless radio frequency (RF) signals and transmits them to the VR47A Video Receiver which you connect to a TV anywhere 900 MHz in your home. The VR47A Receiver converts the signals back to video Video Antenna signals which are fed through a cable to your TV's video input jack.
  • Page 3: Fine Tuning Your System

    UNING YOUR YSTEM ONNECTING 1. Connect a Video cable to the VIDEO The system usually works best with the "pip" on the Camera's antenna OUT jack on the Video Receiver. facing the fl at side of the Receiver's antenna (see diagram below). Connect the other end to your TV's Sometimes, however, refl...
  • Page 4: Troubleshooting

    ROUBLESHOOTING If you do not see a picture on your TV: Try unplugging/turning off any electromagnetic interference producing devices, such as a baby monitor, computer, wireless speakers, cordless phone, There is a power light on the front of the Receiver. Check that the power etc.
  • Page 5: 12 Month Limited Warranty

    ONTH IMITED ARRANTY X10.COM A DIV. OF X10 WIRELESS TECHNOLOGY, INC. (X10) WARRANTS ITS PRODUCTS TO BE FREE FROM DEFECTIVE MATERIAL AND WORKMANSHIP FOR A PERIOD OF ONE (1) YEAR FROM THE ORIGINAL DATE OF PURCHASE AT RETAIL. X10 AGREES TO REPAIR OR...