Chapter 3 - Installation; Automatic Setup; Manual Setup - Buffalo WZR-HP-AG300H User Manual

Chapter 3 - Installation

Automatic Setup

The AirNavigator CD can step you through installing your AirStation. To step through the setup
program, insert the CD into your Windows 7/Vista/XP PC and follow the instructions on the screen.
If your computer uses a different operating system, use manual setup instead.
Note: · To use a wireless client in Windows 7 or Vista, perform setup using the AirNavigator CD to automatically
generate a profile for wirelessly connecting to the AirStation. After setup is complete, once the LAN
cable is removed, you can connect from your wireless client to the AirStation.
· Before performing setup, enable your computer's wireless client.

Manual Setup

To configure your AirStation manually, follow the procedure below.
1
Verify that you can connect to the internet without the AirStation, then turn off your modem
and computer.
2
modem
3
Confirm that the
switch is positioned to
[AUTO].
WZR-HP-AG300H User Manual
2) disconnect
ROUTER
ON
OFF
AUTO
USB
EJECT
Unplug the LAN cable which connects
your computer and modem.
OFF
computer
Make sure the mode switch on the back of
the AirStation is in the "auto" position.
16