Use Cases; Access Point; Access Point With Nat / Dhcp - Buffalo WZR-HP-AG300H User Manual

3.

Use Cases

The following use cases relate to the most commonly used router
configurations. The related router configuration is explained step by
step.

3.1. Access Point

Access Point (AP, sometimes also called "Infrastructure Mode") is the
mode where the router is also the central wireless hub that connects
to the LAN and provides access to wireless devices. These wireless
clients of the AP can communicate with each other and with wired
devices on the network such as the Internet.
Connect your computer to the router as described in 2.1. and access
the web interface according to 2.2.
3.1.1.

Access Point with NAT / DHCP

Setup -> Basic Setup
 WAN Setup
o In "Connection Type", choose the type of WAN connection you want
to use and complete the related settings.
 Network Setup
o Enter the desired LAN IP address for the router into "Router IP".
o Set "DHCP Type" to "DHCP Server" (this is the default).
o "Enable" DHCP Server (this is the default).
o Adjust the DHCP address range to match your requirements.
 Time Settings
o Choose your time zone.
 Click "Save".
Wireless -> Basic Settings
- 18 -