Ryobi VC20HD Owner's Operating Manual

Ryobi VC20HD Owner's Operating Manual

Wet & dry vacuum cleaner

Advertisement

VC20HD
WET & DRY VACUUM CLEANER
OWNER'S OPERATING MANUAL

Advertisement

Table of Contents
loading

Summary of Contents for Ryobi VC20HD

  • Page 1 VC20HD WET & DRY VACUUM CLEANER OWNER’S OPERATING MANUAL...
  • Page 2: Parts

    DESCRIPTION 1. 3 Piece Wand 10. Upper section 2. Floor tool 11. Float switch 3. Crevice tool 12. Filter basket 4. Hose set 13. Cartridge filter cap 5. Wheels (x4) 14. Cartridge filter 6. Handle 15. ON/OFF switch 7. Foam filter 16.
  • Page 3 DESCRIPTION Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Please refer to pages 2 - 3 for instructions...
  • Page 4 DESCRIPTION Fig. 13 Fig. 12 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Please refer to pages 2 - 3 for instructions...
  • Page 5 Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications...
  • Page 6: Safety Information And Warnings

    Do not vacuum up ashes, hot coals and the like, SAFETY INFORMATION AND WARNINGS large fragments of glass and sharp objects. WARNING Don't vacuum up any toner dust, which is used ¡ ö This appliance complies with the in printers and copiers for example, because it compulsory safety regulations for electric is electrically conductive.
  • Page 7: Assembly

    components and may not be disposed of as SAFETY INFORMATION AND WARNINGS household garbage. Don't try to repair the appliance yourself. Always ¡ ö The local and currently applicable legislation ¡ ö use an authorised technician for repairs. Always must be observed unconditionally. have faulty power cords replaced immediately by the manufacturer or a qualified service organisation.
  • Page 8: Cartridge Filter

    When you have finished vacuuming, switch the ¡ ö ASSEMBLY motor off by putting the ON/OFF switch into the "OFF" position (position "O"). Insert the foam filter that has been supplied for ¡ ö Unplug the power plug. wet vacuuming. ¡...
  • Page 9: Maintenance

    OPERATION little space so that some air can also be drawn in along with the liquid. The appliance is equipped with a float switch ¡ ö that will stop the vacuuming when the tank is full. You will notice that suction has stopped by the motor now running faster.

Table of Contents