Favourites Channel - Silvercrest KH 2157 Operating Manual

To delete all Macros
To delete all pre-programmed Macros proceed as follows:
1. Hold down the S button r for a little longer than 3 sec-
onds. The notice "CODE SETUP" appears.
2. With the  or  button t select "MACRO SETUP" and
confirm with the OK button k. In the display "MACRO
SETUP 1" appears.
3. With the  or  button t select "MACRO CLEAR" and
confirm with the OK button k.
4. In the LCD display q "CONFIRM CLEAR" (confirm
delete) appears. Confirm the delete process with the
OK button k. The LCD display q shows "SUCCESS".
All Macros are now deleted and the menu will end.
Tips:
1. When the LCD display q shows "CONFIRM CLEAR" you
can stop the delete process with the EXIT button y.
2. Individual Macros can not be deleted they can only be
overwritten.

Favourites channel

Note:
With this function you can save your preferred stations as
favourites.
To programme favourites
Your favourite stations are saved as follows:
1. Press the device button e for the device that you want to
save a favourite.
2. Hold down the S button r for a little longer than 3 sec-
onds. The notice "CODE SETUP" appears.
3. With the  or  button t select "FAV CH SETUP" and
confirm with the OK button k. In the display "FAV CH
SETUP 1" appears.
4. With the  or  button t select the memory slot to be
programmed (FAV CH SETUP 1 - 4) and confirm with the
OK button k.
5. In the LCD display q "FAV CH STEP" appears. Now
press, one after the other, the buttons (max. 4) for access
to your desired favourite stations.
6. When the maximum number of button commands is
reached the LCD display q shows "FULL".
7. Save the entry with the S button r. In the LCD display q
"FAV CH SETUP" appears.
8. If, with the selection of the favourites to be programmed
(step 4), you select a memory slot that is already occu-
pied the existing favourite will be overwritten.
9. Repeat the steps to apply further favourites.
10. With the EXIT button y you move a level backwards in the
menu except during the entry of the button commands.
- 20 -