Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Electrolux FAVORIT 65010 VI
Summary of Contents for Electrolux FAVORIT 65010 VI
- Page 1 FAVORIT 65010 VI User manual Dishwasher...
- Page 2 Dear Customer Thank you for choosing one of our high-quality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence.
-
Page 3: Table Of Contents
Contents Contents Operating instructions Safety information Correct use General safety Child safety Installation Product description Control panel Setting mode Audible signals First use Set the water softener Setting manually Setting electronically Use of dishwasher salt Use of rinse aid Adjusting the dosage of rinse aid Daily use Loading cutlery and dishes The lower basket... - Page 4 Contents Unloading the dishwasher Care and cleaning Cleaning the filters Cleaning the spray arms External cleaning Internal cleaning Prolonged periods of non-operation Frost precautions Moving the machine What to do if ... Technical data Hints for test institutes Installation instructions Installation Fixing to the adjacent units Levelling...
-
Page 5: Operating Instructions
Safety information Operating instructions Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. -
Page 6: General Safety
Safety information General safety • Dishwasher detergents can cause chemical burns to eyes, mouth and throat. Could endanger life! Comply with the safety instructions of the dishwasher de- tergent manufacturer. • The water in your dishwasher is not for drinking. Detergent residues may still be present in your machine. -
Page 7: Product Description
Product description WARNING! For electrical and water connection carefully follow the instructions given in specific paragraphs. Product description Upper basket Water hardness dial Salt container Detergent dispenser Rinse aid dispenser Rating plate Filters Lower spray arm Upper spray arm... -
Page 8: Control Panel
Control panel Control panel Digital display Delay start button Programme selection buttons Indicator lights On/off button Function buttons Indicator lights MULTITAB Indicates the activation/deactivation of the Multi-tab function (see Multi-tab function) Salt Illuminates when the special salt has run out. Rinse aid Illuminates when the rinse aid has run out. -
Page 9: Setting Mode
Control panel The digital display indicates: • the level of hardness to which the water softener is set, • the approximate remaining time of the running programme, • activation/deactivation of the rinse aid dispenser (ONLY with Multi tab function active), •... -
Page 10: Audible Signals
First use Audible signals Audible signals have been introduced to help indicate which operations the appli- ance is performing: • setting the water softener • end of the programme • intervention of an alarm due to malfunction. Factory setting: audible signals activated. It is possible to deactivate the audible signals, using the function buttons. -
Page 11: Set The Water Softener
Set the water softener Set the water softener The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance. The higher the content of these minerals and salts, the harder your water is. -
Page 12: Setting Electronically
Set the water softener 1. Open the dishwasher door. 2. Remove the lower basket from the dishwasher. 3. Turn the water hardness dial to posi- tion 1 or 2 (see table). 4. Replace the lower basket. Setting electronically The dishwasher is factory set at level 5. 1. -
Page 13: Use Of Dishwasher Salt
Use of dishwasher salt Use of dishwasher salt WARNING! Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes. -
Page 14: Use Of Rinse Aid
Use of rinse aid Use of rinse aid WARNING! Only use branded rinse aid for dishwashers. Never fill the rinse aid dispenser with any other substances (e.g. dishwasher clean- ing agent, liquid detergent). This would damage the appliance. Rinse aid ensures thorough rinsing, and spot and streak free drying. Rinse aid is automatically added during the last rinse. -
Page 15: Adjusting The Dosage Of Rinse Aid
Daily use Adjusting the dosage of rinse aid According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1= minimum dosage, position 6= maxi- mum dosage). The dose is factory set in position 4. Increase the dose if there are drops of water or lime spots on the dishes after washing. - Page 16 Loading cutlery and dishes • When loading the dishes and cutlery, please note: – Dishes and cutlery must not impede the rotation of the spray arms. – Load hollow items such as cups, glasses, pans, etc. with the opening down- wards so that water cannot collect in the container or a deep base.
-
Page 17: The Lower Basket
Loading cutlery and dishes The lower basket Load larger and heavily soiled dishes and pans in the lower basket. To make it easier to load larger dishes, all rear plate racks in the lower basket can be folded down. The cutlery basket WARNING! Long bladed knives stored in an upright position are a potential hazard. -
Page 18: The Upper Basket
Loading cutlery and dishes 1. Place the grid insert on the cutlery basket. 2. Place forks and spoon in the cutlery basket with their handles pointing downwards. For larger utensils, such as whisks, leave off one half of the cutlery grid. The upper basket Load smaller, fragile crockery and long, sharp cutlery in the upper basket. -
Page 19: Adjusting The Height Of The Upper Basket
Loading cutlery and dishes • The cup racks can be folded up out of the way for tall crockery items. • Lay or hang wine and brandy glasses in the slots in the cup racks. • For glasses with long stems, fold the glass rack to the right, otherwise fold it away to the left. -
Page 20: Use Of Detergent
Use of detergent Maximum height of the dishes in: the upper basket the lower basket With upper basket lowered 24 cm 29 cm The height of the upper basket can also be adjusted when it is loaded. Raising / lowering the upper basket: 1. -
Page 21: Fill With Detergent
Use of detergent Fill with detergent 1. Open the lid. 2. Fill the detergent dispenser (1) with detergent. The marking indicates the dosing levels: 20 = approximately 20 g of detergent 30 = approximately 30 g of detergent. 3. All programmes with prewash need an additional detergent dose (5/10 g) that must be placed in the prewash detergent chamber (2). -
Page 22: Multi-Tab Function
Multi-Tab function Multi-Tab function This appliance is equipped with the "Multi-Tab function", that allows the use of the "Multi-Tab" combi detergent tablets. These products are detergents with a combined cleaning, rinsing and salt functions. They can also contain other different agents depending on which kind of tablets you choose ("3 in 1", "4 in 1", "5 in 1"... - Page 23 Multi-Tab function If the drying results are not satisfactory we suggest that you: 1. Fill up the rinse aid dispenser with rinse aid. 2. Activate the rinse aid dispenser. 3. Set the rinse aid dosage to position 2. • The activation/deactivation of the rinse aid dispenser can only be possible with the "Multi-Tab function"...
-
Page 24: Washing Programmes
Washing programmes Washing programmes Programme Degree of Type of Programme description Consumption val- soil load INTENSIV Heavy soil Crockery, CARE 70° cutlery, pots and pans Mixed nor- Crockery, AUTO mal and cutlery, heavy soil pots and pans Light soil Crockery 30 MIN and cutlery Normal... -
Page 25: Select And Start A Washing Programme
Select and start a washing programme Select and start a washing programme Select the washing programme and delay start with the door slightly opened. The start of the programme or the countdown of the delay start will occur only after the closure of the door. Until then it is possible to modify the settings. -
Page 26: Unloading The Dishwasher
Unloading the dishwasher Cancelling a delay start or a washing programme in progress • Simultaneously press and hold the two programme buttons positioned over the word RESET , until all the programme button lights will illuminate. • Cancelling a delay start involves also the cancelling of the washing programme set. -
Page 27: Care And Cleaning
Care and cleaning • Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes. CAUTION! When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off. -
Page 28: Cleaning The Spray Arms
Care and cleaning 6. Remove the flat filter from the base of the washing compartment and clean both faces thoroughly. 7. Put the flat filter back in the base of the washing compartment and en- sure that it fits perfectly. 8. -
Page 29: Prolonged Periods Of Non-Operation
What to do if ... Prolonged periods of non-operation If you are not using the machine for any prolonged period of time you are advised 1. Unplug the appliance and then turn off the water. 2. Leave the door ajar to prevent the formation of any unpleasant smells. 3. - Page 30 What to do if ... Fault code and malfunction Possible cause and solution • continuous flashing of the light of the run- • The water tap is blocked or furred with lime- ning programme scale. • point-shaped optical signal is flashing Clean the water tap.
- Page 31 What to do if ... Once these checks have been carried out, switch on the appliance: the programme will continue from the point at which it was interrupted. If the malfunction or fault code reappears contact the Service Force Centre. For other fault codes not described in the above chart, please contact your local Service Force Centre, quoting the model (Mod.), product number (PNC) and serial number (S.N.).
-
Page 32: Technical Data
Technical data If after all these checks, the problem persists, contact your local Service Force Cen- tre. Technical data Dimension Width - height - depth (cm) 59,6 x 81,8-89,8 x 55,5 Electrical connection - Voltage Information on the electrical connection is given on the rating - Overall power - Fuse plate on the inner edge of the dishwasher's door Water supply pressure... - Page 33 Hints for test institutes Example loading arrangements: Upper basket Cutlery basket Lower basket with cutlery basket 1) If there are cup racks in place on the lefthand side or the cutlery tray is in place, remove them. 2) If necessary, you can remove the cup racks on the lefthand side and/or the beer glass holder.
- Page 34 Hints for test institutes In order to improve the drying performances, we recommend you to assemble the spacers as shown in the pictures. Test performaces must be done with the spacers assembled.
-
Page 35: Installation Instructions
Installation Installation instructions Installation WARNING! Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. This dishwasher is designed to be fitted under a kitchen counter or work surface. -
Page 36: Water Supply Connections
Water supply connections Connection to a cold water supply is advised. If connection is made to a hot water supply the maximum permissible temperature is 60°C. A hot water supply is not always efficient with very soiled crockery as it shortens the washing programmes a lot. -
Page 37: Water Outlet Hose Connection
• If water inlet hose or the safety valve is damaged, remove the mains plug immediately. • A water inlet hose with safety valve must only be replaced by a specialist or by the Service Force Centre. • Place the water inlet hose in such a way that it is never higher than the bottom edge of the safety valve. -
Page 38: Electrical Connection
Electrical connection The total length of the drain hose, including any extension you might add, must be no longer than 4 metres. The internal diameter of the extension hose must be no smaller than the diameter of the hose provided. Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided. -
Page 39: Environment Concerns
Environment concerns Environment concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. - Page 40 www.electrolux.com...