Chicco NextFit User Manual page 34

INSTALL USING LATCH
Locate Tether anchor in your vehicle. Attach Tether Hook.
7
Pull Tether Adjuster strap to tighten.
CHECK YOUR WORK
 Hold Child Restraint at each side near forward-facing vehicle belt path. Pull side
to side and forward. Child Restraint should not move more than 1" (25 mm) from
vehicle seat back or side-to-side.

Make sure Bubble is between lines on label for FORWARD-FACING use. If
necessary, loosen the LATCH and Tether Straps, re-adjust recline and repeat
installation steps to make sure Child Restraint is installed properly.

Check installation before every use!
64
INSTALL USING LATCH
7
65