GEM GS-300 Specification Sheet

Statement
The GS-300 mini surface mount shear lock with complete
housing is specially designed for surface mounting door. The
housing holds the magnet should be fitted above the door and
the housing holds the Armature Plate should be installed on
the door. It is essential to leave a minimum gap of 2mm
between the Shear Lock and the Armature Plate, in order to
perform the correct operation.
Dimension
Magnet
Armature
(Power Off)
(On Power)
Unique Anti-Residual design
When there is no power, there will be no holding force, and
the push-off button will pop out immediately, to release the
Electromagnetic Lock and the Armature Plate for no residual
magnetism.
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-GS-300 Ver. C Published on 2008.05.14
Unit: mm
Magnet
Armature
GS-300
MINI SURFACE MOUNT SHEAR LOCK

Specifications

±
Voltage Tolerance: 10%
Current Draw: 420mA@12 VDC; 210mA@24 VDC
)at temperature 20 C(
Magnetic bond sensor monitor output (GS-300M)
(SPDT rated 3A@30VDC), indicates the door locked
or unlocked status.
Operating Temperature: -30~+55 C
Humidity: 0~95% non-condensing.
Lock's surface Temperature (when the power is on):
<current temperature +20 C
Holding Force: Up to 1200 lbs (545 Kg) in shear.
The Gap between the Lock and Armature plate is 2 mm
Special Finishes for magnet and armature plate: Zinc
Epoxy Potting Compound: E87252 (S), UL94V-0
Weight )Approx.(: 1.4 Kg
Surface Installation
Magnet
Assembly
M6 x45 Screw
Armature
Assembly
Metal Door
Warranty
The product is warranted against defects in material and
workmanship while used in normal service for a period of 5
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
The products are manufactured under an ISO
9 0 0 1
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
Header
M6 x45 Screw
Blind Nut
Blind Nut
& Q C 0 8 0 0 0 0 C e r t i f i e d Q u a l i t y