GEM DG-700 Specifications

Features
Allows up to 65000 proximity cards
Detects the working as machine automatic reply
Has security preserves the hypothesis/Relieves the function
The Unit will operate with card only, PIN or card, PIN + card.
Gate position surveillance input function
Built-in Proximity Reader
Anti-Passive tag along warning output function
Relay and Push to Exit Button function
Proximity automatic setting function
Tricolor LED
May establish 2 Master Cards

Specifications

Input: Request-to-exit
Relay Electric Current: 3A Max@30VDC; 3A@120VAC
Operating Voltage: 10~15VDC
Operating Temperature: -5~60C
Proximity Cards: 65000
Keyboard: 12digits Keypad (0~9,*,#)
Waterproof Design: Waterproof Type Key Pads
Auxiliary Reader: (WG26, WG34)
Transmitting Frequency: 125 kHz
Visual Signals: LED (Red, Blue, Green)
Relay delay timer: 1~255 seconds
Interface: Optional with (RS232 or Rs485)
Read Range: Up to 10 cm
(Depending on local installation conditions)
Size: 110(H)x76(W)x23.5(D)mm
Ambient Humidity: 5%~95%
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-DG-700 Ver. E Published on 2008.06.09
DG-700
Stand alone Access Controller
Auxiliary reader
GEMPROX-E
The auxiliary reader must not be further than 50 meters from
the DG-700. Also this reader should be nearer than 60
centimeters, to avoid disturbance. The suggested wire gauge
is #22~26 AWG. Split of units for DG-700 and
in ranging up to 50 M bring out the friendly system device for
low cost but high security with anti-tampering as well as
convenience and reliability.
Warranty
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
The products are manufactured under an ISO
9 0 0 1
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
auxiliary reader
& Q C 0 8 0 0 0 0 C e r t i f i e d Q u a l i t y