Gianni Industries GEM EM-NH2350 Specification

Features
Holding force up to 800 lbs x2
Aluminum anodized casing.
Mounting plate & housing for easy installation.
Dual voltage 12 or 24 VDC (selectable).
Anti-Residual magnetism function.
Statement
EM-NH2350 is designed for surface mount on
double out-swing doors. Its slide-in
plate simplifies the process of installation and
firmly secures the magnet. EM-NH2350M comes
with magnetic bond sensor indicating locked and
unlocked status.
Specification
Operating Voltage: 12/24 VDC
Current Draw: 250mA/24VDCx2
500mA/125VDC x 2
Operating Temperature -10~ 55ºC (14~131ºF)
Humidity: 0~95% non-condensing.
Holding Force: Up to 800 lbsx2 (363Kgx2)
Dimensions:
Magnet:(L) 530, (W) 52, (D) 29 mm
Armature Plate:(L) 185, (W) 45, (D) 14 mm
Mounting Plate:(L)530, (W) 29, (D) 6.5 mm
Finishes for magnet and armature plate: Zinc Plated
Epoxy Potting Compound: E87252 (S), UL94V-0
Weight (Approx.): 6.0 Kg
Warranty
The product is warranted against defects in material and
workmanship while used in normal service for a period of 5
years from the date of sale to the original client. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-EM-NH2350 Ver. H Published on 2011.09.01
Patent:
ZL 2006 2 0122522.X
Nr. 20 2006 012 052.1
M308308
GB 06 1 6099.8
06 07229 (France)
mounting
GIANNI INDUSTRIES, INC.
No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: inquiry@gianni.com.tw
Website: gianni.tw
EM-NH2350
Double Midi Electromagnetic Lock
Regular Installation
Special Mounting Plate design
Cable
1 . P a s s t h e p o w e r c a b l e
through the mounting plate
and the hole of the maglock.
2.Place the mounting plate
above the maglock. Leave a
length of 1 cm from either end
of the maglock.
3.Slide the mounting plate
into the maglocks. Fit the
maglock from the bottom to
the mounting plate.
4.Use the Allen wrench and
fixing screws to tighten the
mounting plate and maglock.