Sign in today to find solutions:

Forgot your password?

Don't have an account? Sign up

 
Grandstream Networks, Inc.
HT701/ HT702/HT704
Analog Telephone Adaptor
HT701
HT702
HT704
HT70X USER MANUAL

Summary of Contents

  • Page 1

    Grandstream Networks, Inc. HT701/ HT702/HT704 Analog Telephone Adaptor HT701 HT702 HT704 HT70X USER MANUAL...

  • Page 2: Table Of Contents

    HT70X USER MANUAL INDEX GNU GPL INFORMATION ................5 CHANGE LOG ..................... 6 CHANGES FROM 1.0.1.6 USER MANUAL ..................6 WELCOME ....................7 SAFETY COMPLIANCES ........................7 WARRANTY ............................7 CONNECT YOUR HT70X ................9 EQUIPMENT PACKAGING ........................9 CONNECTING THE HT70X ........................9 HT70X FEATRUES ..................

  • Page 3: Table Of Contents

    IMPORTANT SETTINGS ........................25 NAT Settings ..........................25 DTMF Methods ..........................26 Preferred VOCODER (Codec) ...................... 26 SAVING THE CONFIGURATION CHANGES ..................45 REBOOTING THE HT70X FROM REMOTE ..................45 CONFIGURATION THROUGH A CENTRAL SERVER ..............45 SOFTWARE UPGRADE ................47 FIRMWARE UPGRADE THROUGH TFTP/HTTP/HTTPS ..............

  • Page 4

    ABLE CCOUNT ETTINGS 12: HT704 FXS P ...................... 44 ABLE ORTS ETTINGS GUI I ONFIGURATION NTERFACE XAMPLES HT70X USER MANUAL (http://www.grandstream.com/products/ht_series/ht701/documents/ht70x_gui.zip) 1. S CREENSHOT OF DVANCED ONFIGURATION 2. S CREENSHOT OF ASIC ETTINGS ONFIGURATION 3. S FXS P CREENSHOT OF ONFIGURATION 4.

  • Page 5: Gnu Gpl Information

    HT70X firmware contains third-party software licensed under the GNU General Public License (GPL). Grandstream uses software under the specific terms of the GPL. Please see the GNU General Public License (GPL) for the exact terms and conditions of the license.

  • Page 6: Change Log, Changes From 1.0.1.6 User Manual

    CHANGE LOG This section documents significant changes from previous versions of HT70X user manuals. Only major new features or major document updates are listed here. Minor updates for corrections or editing are not documented here. CHANGES FROM 1.0.1.6 USER MANUAL ...

  • Page 7: Welcome, Safety Compliances, Warranty

    Thank you for purchasing Grandstream’s HT70X, the affordable, feature rich Analog Telephone Adaptor. Grandstream HandyTone70X is a new addition to the popular HandyTone ATA product family. It features the rich audio quality, a broad range of voice codecs, and functionality including one independent SIP account per FXS port.

  • Page 8

    Reproduction or transmittal of the entire or any part, in any form or by any means, electronic or print, for any purpose is not permitted without the express written permission of Grandstream Networks, Inc. FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL...

  • Page 9: Connect Your Ht70x, Equipment Packaging, Connecting The Ht70x

    CONNECT YOUR HT70X Connecting the HT70X is easy. Before you begin, please verify the contents of the HT70X package. EQUIPMENT PACKAGING The HT70X ATA package contains:  One HT70X Main Case  One Universal Power Adaptor  One Ethernet Cable ...

  • Page 10

    POWER LED Indicates Power. Remains ON when power is connected Internet LED Indicates Access to Internet. Remains ON while there is Access (HT701 and HT702 Only) Link/Activity LED Indicates if There is Activity on the Internet Port (HT701 and HT702 Only) FIRMWARE VERSION 1.0.3.1...

  • Page 11

    PHONE LED Indicate status of the respective FXS Ports-PHONE on the back panel Unregistered – OFF Registered and Available – ON (Solid Green) Off-Hook / Busy – Blinking every second Slow blinking FXS LEDs indicates voicemail NOTE: All LEDs display green when ON TABLE 3: ADVANCED DEFINITIONS OF THE HT70X LEDS PATTERN LED-01 Device has normal power...

  • Page 12

    0.4sec ON/ 0.4sec OFF Phone *Note: In Provisioning and Firmware Recovery Stage, the power LED is Steady ON. Cordless Phone Analog Internet HT701/702/704 Phone ADSL/Cable Modem Ethernet FIGURE 2: HT70X CONNECTION DIAGRAM FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 12 of 52...

  • Page 13: Ht70x Featrues, Software Features Overview

    HT70X FEATRUES The HT70X is a full feature voice and fax-over IP device that offers a high-level of integration including a 10M/100Mbps network port and one FXS telephone port, market-leading sound quality, rich functionalities, and a compact and lightweight design. The VoIP network signaling protocol supported is SIP.

  • Page 14

    Device Management Web interface or via secure encrypted AES or non-encrypted central configuration file for mass deployment using Grandstream binary file or xml format. Auto/manual provisioning system or via built-in IVR. NAT-friendly remote software upgrade (via TFTP/HTTP/HTTPS) for deployed devices including behind firewall/NAT.

  • Page 15: Hardware Specification

    HARDWARE SPECIFICATION The table below lists the Hardware and Technical specification of HT70X. TABLE 5: HT70X HARDWARE AND TECHNICAL SPECIFICATIONS HT701 HT702 HT704 Telephone 1 RJ11 FXS port 2 RJ11 FXS ports 4 RJ11 FXS ports Interfaces Network 1 RJ45 10/100 Mb Base-TX,...

  • Page 16: Basic Operations, Understanding Ht70x Voice Prompt

    BASIC OPERATIONS UNDERSTANDING HT70X VOICE PROMPT HT70X has a built-in voice prompt menu for simple device configuration. The IVR menu and the LED button work with any of the FXS port. Pick up the handset and dial “***” to use the IVR menu. TABLE 6: HT70X IVR MENU DEFINITIONS MENU VOICE PROMPT...

  • Page 17

    toggle between TFTP / HTTP / HTTPS Firmware Version Firmware version information. Firmware upgrade mode. Press “9” to toggle among the following Firmware Upgrade three options: - always check - check when pre/suffix changes - never upgrade “Direct IP Calling” Enter the target IP address to make a direct IP call, after dial tone.

  • Page 18: Placing A Phone Call, Phone Or Extension Numbers, Direct Ip Calls

    PLACING A PHONE CALL PHONE OR EXTENSION NUMBERS 1. Dial the number directly and wait for 4 seconds (Default “No Key Entry Timeout”); or 2. Dial the number directly and press # (Use # as dial key” must be configured in web configuration). Examples: 1.

  • Page 19: Call Hold, Call Waiting, Call Transfer, Blind Transfer

    Destination ports can be specified using “*” (encoding for “:”) followed by the port number. Examples of Direct IP Calls: a) If the target IP address is 192.168.0.160, the dialing convention is *47 or Voice Prompt with option 47, then 192*168*0*160. followed by pressing the “#”...

  • Page 20: Attended Transfer, Way Conferencing

    A can pick up the phone to resume conversation with B. 3-WAY CONFERENCING The HT701/702/704 supports Bellcore style 3-way Conference. Instructions for 3-way conference: Assume that call party A and B are in conversation. Caller A(HT70X) wants to bring third Caller C into conference: 1.

  • Page 21: Fax Support

    3. If C answers the call, then A presses FLASH to bring B, C in the conference. 4. If C does not answer the call, A can press FLASH back to talk to B. 5. If A presses FLASH during conference, C will be dropped out. 6.

  • Page 22: Call Features

    CALL FEATURES The HT70X supports all the traditional and advanced telephony features. TABLE 7: HT70X CALL FEATURES CALL FEATURES Forcing a Codec (per call) *027110 (PCMU), *027111 (PCMA), *02723 (G723), *02729 (G729), *0272616 (G726-r16), *0272624 (G724-r24), *0272632 (G726-r32), *0272640 (G726-r40), *027201 (iLBC) Disable LEC (per call) Dial “*03”...

  • Page 23

    Cancel Delayed Call Forward. To cancel Delayed Call Forward, dial “*93”, wait for dial tone, then hang up. Flash/Hook Toggles between active call and incoming call (call waiting tone). If not in conversation, flash/hook will switch to a new channel for a new call. Pressing pound sign will serve as Re-Dial key.

  • Page 24: Configuration Guide, Configuring The Ht70x Through Voice Prompts, Configuring The Ht70x Via Web Browser

    CONFIGURATION GUIDE CONFIGURING THE HT70X THROUGH VOICE PROMPTS DHCP M Select voice menu option 01 to enable HT70X to use DHCP. STATIC IP M Select voice menu option 01 to enable HT70X to use STATIC IP mode, then use option 02, 03, 04, 05 to set up IP address, Subnet Mask, Gateway and DNS server respectively.

  • Page 25: Access The Web Configuration Menu, Important Settings, Nat Settings

    “ADVANCED SETTING”, “FXS PORTs” configuration pages. Please reference the GUI pages using the following link: http://www.grandstream.com/products/ht_series/HT70x/documents/HT70x_gui.zip NOTE: If you cannot log into the configuration page by using the default password, please check with the VoIP service provider. It is most likely the VoIP service provider has provisioned the device and configured for you therefore the password has already been changed.

  • Page 26: Dtmf Methods, Preferred Vocoder (codec)

    1. STUN Server (under Advanced Settings webpage) Enter a STUN Server IP (or FQDN) that you may have, or look up a free public STUN Server on the internet and enter it on this field. If using Public IP, keep this field blank. 2.

  • Page 27

    DHCP mode: all the field values for the Static IP mode are not used (even though they are still saved in the Flash memory.) The HT701 acquires its IP address from the first DHCP server it discovers from the LAN it is connected. Using the PPPoE feature: set the PPPoE account settings.

  • Page 28

    Self-Defined Time Zone The syntax is std offset dst [offset],start[/time],end[/time] Default is set to : MTZ+6MDT+5,M3.2.0,M11.1.0 MTZ+6MDT+5, Time zone with 6 hours offset with 1 hour ahead which is the US central time. It is positive (+) if the local time zone is west of the Prime Meridian and negative (-) if it is east. Prime Meridian (a.k.a: International or Greenwich Meridian) M3.2.0,M11.1.0 The 1...

  • Page 29

    Advanced User configuration includes the end user configuration and the advanced configurations including: a) SIP configuration, b) Codec selection, c) NAT Traversal Setting and d) other miscellaneous configuration. HT701 and HT702 FXS SIP account(s) have its own configuration page. HT704 has two (2) profiles for the four (4) FXS ports.

  • Page 30

    TABLE 10: ADVANCED SETTINGS Admin Password This contains the password to access the Advanced Web Configuration page. This field is case sensitive. Only the administrator can configure the “Advanced Settings” page. Password field is purposely left blank for security reasons after clicking update and saved. The maximum password length is 25 characters.

  • Page 31

    The password needed to authenticate with the HTTP/HTTPS server. Password Firmware File Prefix Default is blank. If configured, HT701 will request firmware file with the prefix. This setting is useful for ITSPs. End user should keep it blank. Firmware File Postfix Default is blank.

  • Page 32

    SIP TLS Certificate The user specify SSL certificate used for SIP over TLS in X.509 format. SIP TLS Private Key The user specify SSL private key used for SIP over TLS in X.509 format. SIP TLS Private Key User specify password to protect the private key above. Password User specify the Auto Configuration Server’s URL (TR-069 protocol) ACS URL...

  • Page 33

    Default is No. If set to “Yes”, the configuration update via keypad is disabled. Lock Keypad Update Disable Voice Prompt Default is No. Disables the voice prompt configuration. Disable Direct IP Call Default is No. Disables the Direct IP Call function. Failover to FXO Default is Disable.

  • Page 34

    Syslog Level Select the HT701 to report the log level. Default is NONE. The level is one of EXTRA DEBUG, DEBUG, INFO, WARNING or ERROR. Syslog messages are sent based on the following events: 1. product model/version on boot up (INFO level) 2.

  • Page 35

    Default is 1813. Specifies the port to be used for the Primary RADIUS Account. HT704 Primari RADIUS Acct Only Port Specifies the secret string to be used to authenticate the RADIUS connection to the Primary RADIUS Primary Server. It should match RADIUS configuration. HT704 Only Server Secret Set the IP or FQDN of the Secondary RADIUS Server.

  • Page 36

    User account information, provided by VoIP service provider (ITSP). Usually in the form of digit similar to phone number or actually a phone number. HT701 and HT702 only SIP service subscriber’s Authenticate ID used for authentication. Can be identical to or Authenticate ID different from SIP User ID.

  • Page 37

    calls. Register Expiration This parameter allows the user to specify the time frequency (in minutes) the HT70X refreshes its registration with the specified registrar. The default interval is 60 minutes (or 1 hour). The maximum interval is 65535 minutes (about 45 days). Registration Retry Wait Retry registration if the process failed.

  • Page 38

    Only the user part of a SIP address needs to be entered here. The HT70X will automatically append the “@” and the host portion of the corresponding SIP address. HT701 and HT702 only Offhook Auto-Dial The auto-dial delay after off hook.

  • Page 39

    Ring Cadence located under Advanced Settings Configuration page. Note: If server supports Alert-Info header and standard ring tone set (Bellcore) or distinctive ring tone 1-10 is specified, then the ring tone in the Alert-Info header from server will be used. Bellcore rings and tones are independent from custom ring tones. The custom ring tones can also be specified by alert-info header, for example Alert-Info: <http://127.0.0.1>;info=ring5 Disable Call Waiting...

  • Page 40

    seconds have elapsed if the user forgets to press the “Re-Dial” button. The “Yes” option should be used ONLY if there is a SIP proxy configured and the proxy server supports 484 Incomplete Address response. Otherwise, the call will likely be rejected by the proxy (with a 404 Not Found error).

  • Page 41

    Softswitch vendors. Session Expiration Grandstream implemented SIP Session Timer. The session timer extension enables SIP sessions to be periodically “refreshed” via a SIP request (UPDATE, or re-INVITE. Once the session interval expires, if there is no refresh via a UPDATE or re-INVITE message, the session will be terminated.

  • Page 42

    Force INVITE Session Timer can be refreshed using INVITE method or UPDATE method. Select “Yes” to use INVITE method to refresh the session timer. Default is No, Default is No, If set to “Yes”, device will send an INVITE with audio vocoders upon Send Re-INVITE After completion of Fax to continue session in audio only.

  • Page 43

    transmission mode. Select between Disabled, Enabled but not Forced, and Enabled and Forced. Default is Disabled. SLIC Setting Dependent on standard phone type (and location) Caller ID Scheme Bellcore/Telcordia, ETSI-FSK, ETSI-DTMF, SIN 227 – BT, & NTT Japan Default is No. If set to “Yes”, polarity will be reversed upon call establishment and Polarity Reversal termination.

  • Page 44

    Map to FXP Port # This is used only when peering with a Grandstream GXW410x. Default is 1, Supported values are 1-8, meaning line 1 to line 8 of the GXW410x device where the port will be mapped to.

  • Page 45: Saving The Configuration Changes, Rebooting The Ht70x From Remote, Configuration Through A Central Server

    TFTP or HTTP (thus no NAT issues) and other communication protocols to communicate with each individual Grandstream device for firmware upgrade, remote reboot, etc. Grandstream provides GAPS service to VoIP service providers. Use GAPS for either simple redirection or with certain special provisioning settings.

  • Page 46

    Grandstream also provides a configuration tool to facilitate the task of generating device configuration files. The Grandstream configuration tool is free to end users. The tool and configuration templates are available for download from http://www.grandstream.com/support/tools FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL...

  • Page 47: Software Upgrade, Firmware Upgrade Through Tftp/http/https

    CONFIGURATION GUIDE section for instructions. If the server is in FQDN format, it must be set via the web configuration interface.  Grandstream recommends end-user use the Grandstream HTTP server. Its address can be found at http://www.grandstream.com/support/firmware . Currently the HTTP firmware server IP address is firmware.grandstream.com.

  • Page 48: Instructions For Upload From Local Directory, Instructions For Local Firmware Upgrade Using Tftp Server

    1. Unzip the file and put all of them under the root directory of the TFTP server. 2. Put the PC running the TFTP server and the HT701 device in the same LAN segment. 3. Please go to File -> Configure -> Security to change the TFTP server's default setting from "Receive Only"...

  • Page 49: Configuration File Download, Firmware And Configuration File Prefix And Postfix

    When a Grandstream device boots up or reboots, it will issue a request for a configuration XML file named "cfgxxxxxxxxxxxx.xml" followed by a file named "cfgxxxxxxxxxxxx", where "xxxxxxxxxxxx" is the MAC address of the device, i.e., "cfg000b820102ab".

  • Page 50

    different intervals in P193 for different devices, Server Provider can spread the Firmware or Configuration File download in minutes to reduce the Firmware or Provisioning Server load at any given time. Automatic Upgrade: Yes, every minutes(60-5256000). Yes, daily at hour (0-23).

  • Page 51: Restore Factory Default Setting

    Restoring the Factory Default Setting will DELETE all configuration information of the phone. Please BACKUP or PRINT out all the settings before you approach to following steps. Grandstream will not take any responsibility if you lose all the parameters of setting and cannot connect to your VoIP service provider.

  • Page 52

    3333 For example: if the MAC address is 000b8200e395, it should be keyed in as “0002228200333395”. Reset from web interface (Reset Type) 1. From the Advanced Settings Page user can select three types:  Full Reset: This will make a full reset ...

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: