Enabling Wi-Fi Direct Mode - Epson WF-3540 User Manual

7. Confirm the displayed network settings and press Proceed to save them.
Note: If you need to change a setting, press the
8. If you want to print a network setup report, press one of the
Stop/Reset button.)
9. Press the
The WiFi light should now be on, but not flashing.
Note: If the WiFi light is off, you may have selected the wrong network name or entered the
password incorrectly. Repeat these steps to try again.
Parent topic:

Enabling Wi-Fi Direct Mode

You can enable Wi-Fi Direct mode to allow direct communication between your product and computer or
other devices without a wireless router or access point.
Note: If the printer is already connected to a wireless router or access point, you must disable Wi-Fi on
the printer before you can use Wi-Fi Direct.
1. Press the
2. Select Wi-Fi Setup.
You see this screen:
home button to exit.
Wi-Fi Networking
home button, if necessary.
back button.
buttons. (Otherwise, press the
31