Gianni Industries 10010ST Specification

Features
Low maintenance with high reliability
Stainless steel casing
Anti-residual magnetism function
Holding force up to 1200 lbs
Dual voltage input: 12 or 24 VDC (selectable)
MOV protects against spike and surge current
Statement
10010ST is designed for surface mount on
out-swing doors. The
configured to mount on in-swing doors with
optional LZ-shaped brackets. With stainless
steel housing, it is
applications and severe weather conditions.
10020ST comes with locked and unlocked
status output.
Specification
Operating Voltage: Single Voltage: 12 or 24VDC
Dual Voltage: 12/24VDC
Current Draw:
Single Voltage: 460mA/12VDC, 250mA/24VDC
Dual Voltage: 500mA/12VDC, 250mA/24VDC
(at temperature 20ºC)
Bond sensor output (10020ST)SPDT rated 0.5A/20VDC
Operating temperature: -10~55ºC (14~131ºF)
Humidity: 0~95% non-condensing.
Holding force: 1200 lbs (545 Kg)
Dimensions:
Magnet:(L) 220, (W) 68, (D) 41 mm
Armature plate:(L) 185, (W) 62, (D) 16 mm
Zinc plated finish for magnet and armature plate
Epoxy potting compound: E87252 (S), UL94V-0
Net Weight: 5.0 Kg
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-10010ST Ver. F Published on 2011.08.30
maglock can be
suit able for outdoor
10010ST Standard Surface Mount
Waterproof Electromagnetic Lock
Standard Installation
This series of Waterproof Magnetic Lock is
potting compound. Also, GEM Waterproof Series Magnetic
Locks have been proved to withstand water with the test
procedures of IPX7, IPX8 by a trusted third party. Therefore
users need not worry that the lock will rust or spark, if the lock
is in outdoor applications and installed in confined space
where inflammable gases are stored.
Magnet Armature
(Power On)
Anti-residual statement
Our electromagnet locks feature Anti-Residual Magnetism
(ARM) which ensures the door can be opened without any
resistance from left over magnetism imparted to the armature
plate
GIANNI INDUSTRIES, INC.
No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: inquiry@gianni.com.tw
Website: gianni.tw
protected by epoxy
Magnet
Armature
(Power Off)