JVC KD-LX330R Instructions Manual
  1. Manuals
  2. Brands
  3. JVC Manuals
  4. Car Receiver
  5. KD-LX330R
  6. Instructions manual
JVC KD-LX330R Instructions Manual

JVC KD-LX330R Instructions Manual

Cd receiver
Hide thumbs Also See for KD-LX330R:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, Instruction Manual
CD RECEIVER
CD-RECEIVER
RECEPTEUR CD
CD-RECEIVER
KD-LX330R
For installation and connections, refer to the separate manual.
Angaben zu Einbau und Verkabelung entnehmen Sie bitte der gesonderten Anleitung.
Pour l'installation et les raccordements, se référer au manuel séparé.
Zie de afzonderlijke handleiding voor details aangaande het installeren en verbinden van het
toestel.
BAND
SEL
DISP
MODE
INSTRUCTIONS
BEDIENUNGSANLEITUNG
MANUEL D'INSTRUCTIONS
GEBRUIKSAANWIJZING
KD-LX330R
SCM
MONO
LOCAL
INT
RPT
RND
7
8
9
10
11
12
SOURCE
For Customer Use:
Enter below the password
you have entered for your
security lock.
Retain this password for
future reference.
PASSWORD:
T P / R D S
PTY
OFF
PIM164200
[E]

Advertisement

Table of Contents
loading

Related Manuals for JVC KD-LX330R

Summary of Contents for JVC KD-LX330R

  • Page 1 CD RECEIVER CD-RECEIVER RECEPTEUR CD CD-RECEIVER KD-LX330R For installation and connections, refer to the separate manual. Angaben zu Einbau und Verkabelung entnehmen Sie bitte der gesonderten Anleitung. Pour l’installation et les raccordements, se référer au manuel séparé. Zie de afzonderlijke handleiding voor details aangaande het installeren en verbinden van het toestel.

  • Page 2: Laser Product

    3.CAUTION: Do not open the top cover. There are no user-serviceable parts inside. Leave all servicing to qualified service personnel. 4.CAUTION: This CD player uses invisible laser radiation and is equipped with safety switches to prevent radiation emission when unloading CDs. It is dangerous to defeat the safety switches.

  • Page 3: Table Of Contents

    Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS LOCATION OF THE BUTTONS ... Control panel ... Remote controller ...

  • Page 4: Location Of The Buttons

    LOCATION OF THE BUTTONS Control panel CD loading slot BAND *When you press OFF/0, the display panel moves down and the CD loading slot appears. 1 Control dial ¢ / 4 button ¢ / 4 • also functions as ON or CLOSE button.

  • Page 5: Remote Controller

    Remote controller 1 • Turns on the unit if pressed when the unit is turned off. • Turns off the unit if pressed and held until “SEE YOU” appears on the display. • Drops the volume level for a moment if pressed briefly.

  • Page 6: Preparing The Remote Controller

    • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. Remote sensor KD-LX330R SOURCE BAND • Do not expose the remote sensor to strong light (direct sunlight or artificial lighting).

  • Page 7: Basic Operations

    KD-LX330R SOURCE BAND Turn on the power. The display illuminates and the control panel and control dial come out. Select the source. Each time you press the button, the source changes as follows: = FM = DAB tuner** = CD*...

  • Page 8: Radio Basic Operations

    This receiver has three FM bands (FM1, FM2, to search FM3). You can use any one of them to listen to an FM broadcast. KD-LX330R T P / R D S TP/RDS 1 Press SOURCE to select FM or AM as the source.

  • Page 9: Storing Stations In Memory

    ¢ or 4 Press and hold “M” (manual) starts flashing on the display. Tune into a station you want while “M” is flashing. ¢ to tune into Press stations of higher frequencies. Press 4 stations of lower frequencies. • If you release your finger from the button, the manual mode will automatically turn off after 5 seconds.

  • Page 10: Tuning Into A Preset Station

    Manual preset You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually. Ex.: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band Select the band (FM1). 1 Press SOURCE to select FM as the source.

  • Page 11: Rds Operations

    What you can do with RDS EON RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals. For example, the stations send their station names, as well as information about what type of programme they broadcast, such as sports or music, etc.

  • Page 12: Using Standby Reception

    The same programme can be received on different frequencies. Programme 1 broadcasting on frequency A Programme 1 broadcasting on frequency B Programme 1 broadcasting on frequency C Using Standby Reception Standby Reception allows the unit to switch temporarily to your favourite programme (PTY: Programme Type) and Traffic Announcement (TA) from the current source (another FM station, CD and other connected components).
  • Page 13 Selecting your favourite programme for PTY Standby Reception You can select your favourite programme for PTY Standby Reception to store in memory. When shipped from the factory, “NEWS” is stored as the programme type for PTY Standby Reception. Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

  • Page 14: Other Convenient Rds Functions And Adjustments

    Press and hold the number button for more than 2 seconds to store the PTY code selected into the preset number you want. PTY preset number appears, and selected code name and “MEMORY” alternate on the display. Press SEL (select) to finish the setting. To search your favourite programme type Press and hold PTY (programme type) for more than 1 second while listening...

  • Page 15: Automatic Clock Adjustment

    Changing the display mode while listening to an FM station You can change the initial indication on the display to either station name (PS NAME) or to station frequency (FREQUENCY), while listening to an FM RDS station. • See also “Changing the general settings (PSM)” on page 22.

  • Page 16: Cd Operations

    If the ejected disc is not removed for about 15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust. (CD play will not start this time.) KD-LX330R SOURCE TP/RDS TP/RDS . If no button is pressed, the display the display panel and the unit, as it may get caught in the unit.

  • Page 17: Locating A Track Or A Particular Portion On A Cd

    Locating a track or a particular portion on a CD To fast-forward or reverse the track Press and hold playing a CD, to fast-forward the track. Press and hold 4 playing a CD, to reverse the track. To go to the next tracks or the previous tracks ¢...

  • Page 18: Prohibiting Cd Ejection

    To play back only intros (Intro Scan) You can play back the first 15 seconds of each track sequentially. 1 Press MODE BAND while playing a CD. “MODE” appears on the lower part of the display, and the number buttons can work as different function buttons.

  • Page 19: Sound Adjustments

    Adjusting the sound You can adjust the sound characteristics to your preference. Select the item you want to adjust. Each time you press the button, the adjustable items change as follows: BASS TREBLE VOLUME WOOFER Indication To do: BASS Adjust the bass. TREBLE Adjust the treble.

  • Page 20: Using The Sound Control Memory

    What is BBE The BBE * function restores the brilliance and clarity of the original live sound in recording, broadcasts, etc. When a speaker reproduces sound, it introduces frequency-dependent phase shifting, causing high- frequency sounds to take longer to reach the ear than low frequency sounds.

  • Page 21: Storing Your Own Sound Adjustments

    Indication For: Preset values Bass Treble BBE SCM BEAT Rock or disco +02 music SCM SOFT Quiet background music SCM POP Light music SCM OFF (Flat sound) Recalling the sound modes When “SCM LINK” is set to “SCM LINK ON,” select the source. The sound mode stored in memory for the selected source is recalled.

  • Page 22: Other Main Functions

    OTHER MAIN FUNCTIONS Setting the clock Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (See page 23.) Set the hour. 1 Select “CLOCK HOUR” if not shown on the display.
  • Page 23 Preferred Setting Mode (PSM) items Hold. Select. CLOCK HOUR Hour adjustment CLOCK MINUTE Minute adjustment SCM LINK Sound control memory linkage CLOCK24H/12H 24/12-hour time display AUTO ADJUST Automatic clock setting CLOCK DISP Clock display TUNER DISP Tuner display PTY STANDBY PTY standby PTY SEARCH PTY search...
  • Page 24 To cancel Advanced SCM — You can cancel the Advanced SCM (Sound Control Memory), and unlink the sound modes and the playback sources. When shipped from the factory, a different sound mode can be stored in memory for each source so that you can change the sound modes simply by changing the sources.
  • Page 25 To adjust the display contrast level — CONTRAST You can adjust the display contrast level among “01” (dark) to “10” (bright). When shipped from the factory, the display contrast level is set at level “05.” To select the scroll mode — You can select the scroll mode for the disc information if it consists of more than 12 characters.

  • Page 26: Controlling The Volume Automatically (Audio Cruise)

    To change the FM tuner selectivity — IF FILTER In some areas, adjacent stations may interfere with each other. If this interference occurs, noise may be heard. This unit has been preset to automatically reduce this interference noise (“AUTO”) when shipped from the factory. •...
  • Page 27 Press SEL (select) to finish the setting. When this function is turned on (the CRUISE indicator lights up on the display), the proper volume level is automatically selected among the 3 possible levels according to the driving speed, and the selected level is shown on the display. When the driving speed increases.

  • Page 28: Assigning Names To The Sources

    Assigning names to the sources You can assign names to CDs and the external component connected to the LINE IN plugs. After assigning a name, it will appear on the display when you select the source. Sources Maximum number of CDs* and Up to 32 characters (up to CD changer*...
  • Page 29 Available characters Capital letters space Small letters space Numbers and symbols ” & – space Notes: • When you try to assign a name to the 41st disc, “NAME FULL” appears on the display. (In this case, delete unwanted names before assignment.) •...

  • Page 30: Using The Security Lock

    Using the security lock You can prohibit the unauthorized use of this unit by the others. To use the security lock, you need to set the password first. Once you set the password, the unit will ask you to enter the password when you turn on the unit for the first time after re- installation (or after recovering the car battery exhaustion).
  • Page 31 When Security Lock works? Once you register the password, “ appears on the display, and the unit will ask you to enter the password in the following cases: • When you turn on the unit for the first time after re-installing the unit.

  • Page 32: Cd Changer Operations

    We recommend that you use one of the CH-X series with your unit. If you have another CD automatic changer, consult your JVC IN-CAR ENTERTAINMENT dealer for connections. • For example, if your CD automatic changer is one of the KD-MK series, you need a cord (KS-U15K) for connecting it to this unit.

  • Page 33: Selecting Cd Playback Modes

    Disc number Ex.: When disc number 3 is selected To show the CD Text information This is possible only when connecting a JVC CD automatic changer equipped with CD Text reading capability. See “Playing a CD Text” on page 18.
  • Page 34 To play back tracks repeatedly (Repeat Play) Press MODE BAND while playing a CD. “MODE” appears on the display. BAND Press RPT (repeat), while “MODE” is still on the display, so that the RPT indicator lights up on the display. Each time you press the button, CD repeat play mode changes as follows: REPEAT1...

  • Page 35: External Component Operations

    Each time you press the button, the source changes as described on page 7. Operate the external component. Note: For the external component connection, see the Installation/Connection Manual (separate volume). KD-LX330R B A N D MONO LOCAL DISP MODE SOURCE...

  • Page 36: Dab Tuner Operations

    DAB TUNER OPERATIONS We recommend that you use DAB (Digital Audio Broadcasting) tuner KT-DB1500 with your unit. If you have another DAB tuner, consult your JVC IN-CAR ENTERTAINMENT dealer. • Refer also to the Instructions supplied with your DAB tuner.

  • Page 37: Storing Dab Services In Memory

    Select a service you want to listen to. BAND 1 Press MODE BAND. “MODE” appears on the display. 2 Press to select a service you want, while “MODE” is still on the display. To change the display information while tuning into an ensemble Normally service name is shown on the display.

  • Page 38: Tuning Into A Preset Dab Service

    Press and hold the number button (in this example, 1) you want to store the selected service into for more than 2 seconds. Band number and “MEMO” appear alternately for a while. Repeat the above procedure to store other DAB services into other preset numbers.

  • Page 39: What You Can Do More With Dab

    What you can do more with DAB Tracing the same program automatically (Alternative Reception) You can keep listening to the same program. • While receiving a DAB service: When driving in an area where a service cannot be received, this unit automatically tunes in another ensemble or FM RDS station, broadcasting the same program.

  • Page 40: Additional Information

    ADDITIONAL INFORMATION PTY codes NEWS: News AFFAIRS: Topical programmes expanding on current news or affairs INFO: Programmes which impart advice on a wide variety of topics SPORT: Sport events EDUCATE: Educational programmes DRAMA: Radio plays CULTURE: Programmes on national or regional culture SCIENCE: Programmes on natural science...

  • Page 41: Troubleshooting

    The antenna is not connected firmly. No CD is in the magazine. This unit is not connected to a CD changer correctly. The CD player may function incorrectly. Security lock is in use. The built-in microcomputer may function incorrectly due to noise, etc.

  • Page 42: Maintenance

    • After starting the heater in the car. • If it becomes very humid inside the car. Should this occur, the CD player may malfunction. In this case, eject the CD and leave the unit turned on for a few hours until the moisture evaporates.

  • Page 43: Specifications

    [MW Tuner] Sensitivity: 20 V Selectivity: 35 dB [LW Tuner] Sensitivity: 50 V CD PLAYER SECTION Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of channels: 2 channels (stereo) Frequency Response: 5 Hz to 20 000 Hz...
  • Page 44 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Haben Sie PROBLEME mit dem Betrieb? Bitte setzen Sie Ihr Gerät zurück Siehe Seite Zurücksetzen des Geräts Vous avez des PROBLÈMES de fonctionnement? Réinitialisez votre appareil Référez-vous à...
  • Page 45 CD RECEIVER CD-RECEIVER RECEPTEUR CD CD-RECEIVER KD-LX110R For installation and connections, refer to the separate manual. Angaben zu Einbau und Verkabelung entnehmen Sie bitte der gesonderten Anleitung. Pour l’installation et les raccordements, se référer au manuel séparé. Zie de afzonderlijke handleiding voor details aangaande het installeren en verbinden van het toestel.
  • Page 46 3.CAUTION: Do not open the top cover. There are no user-serviceable parts inside. Leave all servicing to qualified service personnel. 4.CAUTION: This CD player uses invisible laser radiation and is equipped with safety switches to prevent radiation emission when unloading CDs. It is dangerous to defeat the safety switches.

  • Page 47: When Shipped From The Factory, "Demo Mode" Is Set To "Demo On" In This Unit. The Demonstration Will Start Automatically If No Sound Comes In For 3 Minutes. (See

    Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS LOCATION OF THE BUTTONS ... Control panel ... Remote controller (With an optionally purchased remote controller) ...

  • Page 48: Location Of The Buttons

    LOCATION OF THE BUTTONS Control panel CD loading slot BAND *When you press OFF/0 button, the display panel moves down and the CD loading slot appears. 1 Control dial ¢ / 4 button ¢ / 4 • also functions as ON or CLOSE button.

  • Page 49: Remote Controller (With An Optionally Purchased Remote Controller)

    Remote controller (With an optionally purchased remote controller) We recommend that you use remote controller RM-RK31 with your unit. The following are the instructions for using RM-RK31. 1 • Turns on the unit if pressed when the unit is turned off. •...

  • Page 50: Preparing The Remote Controller

    Preparing the remote controller Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. Remote sensor KD-LX110R SOURCE BAND • Do not expose the remote sensor to strong light (direct sunlight or artificial lighting).

  • Page 51: Basic Operations

    To operate the tuner (FM or AM), see pages 8 – 15. To operate the CD player, see pages 16 – 18. To operate the CD changer, see pages 29 – 31.

  • Page 52: Radio Basic Operations

    RADIO BASIC OPERATIONS BAND Listening to the radio You can use either automatic searching or manual searching to tune into a particular station. Searching a station automatically: Auto search Select the band. 1 Press SOURCE to select FM or AM as the source. 2 If necessary, press and BAND hold MODE BAND to...

  • Page 53: Storing Stations In Memory

    ¢ or 4 Press and hold “M” (manual) starts flashing on the display. Tune into a station you want while “M” is flashing. ¢ to tune into Press stations of higher frequencies. Press 4 stations of lower frequencies. • If you release your finger from the button, the manual mode will automatically turn off after 5 seconds.

  • Page 54: Tuning Into A Preset Station

    Manual preset You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually. Ex.: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band Select the band (FM1). 1 Press SOURCE to select FM as the source.

  • Page 55: Rds Operations

    What you can do with RDS EON RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals. For example, the stations send their station names, as well as information about what type of programme they broadcast, such as sports or music, etc.
  • Page 56 The same programme can be received on different frequencies. Programme 1 broadcasting on frequency A Programme 1 broadcasting on frequency B Programme 1 broadcasting on frequency C Using Standby Reception Standby Reception allows the unit to switch temporarily to your favourite programme (PTY: Programme Type) and Traffic Announcement (TA) from the current source (another FM station, CD and other connected components).
  • Page 57 Selecting your favourite programme for PTY Standby Reception You can select your favourite programme for PTY Standby Reception to store in memory. When shipped from the factory, “NEWS” is stored as the programme type for PTY Standby Reception. Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

  • Page 58: Other Convenient Rds Functions And Adjustments

    Press and hold the number button for more than 2 seconds to store the PTY code selected into the preset number you want. PTY preset number appears, and selected code name and “MEMORY” alternate on the display. Press SEL (select) to finish the setting. To search your favourite programme type Press and hold PTY (programme type) for more than 1 second while listening...
  • Page 59 Changing the display mode while listening to an FM station You can change the initial indication on the display to either station name (PS NAME) or to station frequency (FREQUENCY), while listening to an FM RDS station. • See also “Changing the general settings (PSM)” on page 22.

  • Page 60: Cd Operations

    CD OPERATIONS Playing a CD Open the loading slot. The display panel moves down, and the loading slot appears. Insert a disc into the loading slot. The unit draws in a CD, the display panel moves up, and CD play starts automatically.

  • Page 61: Locating A Track Or A Particular Portion On A Cd

    Locating a track or a particular portion on a CD To fast-forward or reverse the track Press and hold playing a CD, to fast-forward the track. Press and hold 4 playing a CD, to reverse the track. To go to the next tracks or the previous tracks ¢...

  • Page 62: Prohibiting Cd Ejection

    To play back only intros (Intro Scan) You can play back the first 15 seconds of each track sequentially. 1 Press MODE BAND while playing a CD. “MODE” appears on the lower part of the display, and the number buttons can work as different function buttons.

  • Page 63: Sound Adjustments

    Adjusting the sound You can adjust the sound characteristics to your preference. Select the item you want to adjust. Each time you press the button, the adjustable items change as follows: BASS TREBLE VOLUME Indication To do: BASS Adjust the bass. TREBLE Adjust the treble.

  • Page 64: Using The Sound Control Memory

    What is BBE The BBE * function restores the brilliance and clarity of the original live sound in recording, broadcasts, etc. When a speaker reproduces sound, it introduces frequency-dependent phase shifting, causing high- frequency sounds to take longer to reach the ear than low frequency sounds.

  • Page 65: Storing Your Own Sound Adjustments

    Indication For: Preset values Bass Treble BBE SCM BEAT Rock or disco +02 music SCM SOFT Quiet background music SCM POP Light music SCM OFF (Flat sound) Recalling the sound modes When “SCM LINK” is set to “LINK ON,” select the source. The sound mode stored in memory for the selected source is recalled.

  • Page 66: Other Main Functions

    OTHER MAIN FUNCTIONS Setting the clock Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (See page 23.) Set the hour. 1 Select “CLOCK HOUR” if not shown on the display.
  • Page 67 Preferred Setting Mode (PSM) items Hold. Select. CLOCK HOUR Hour adjustment CLOCK MIN Minute adjustment SCM LINK Sound control memory linkage 24H/12H 24/12-hour time display AUTO ADJ Automatic clock setting CLOCK DISP Clock display TUNER DISP Tuner display PTY STBY PTY standby PTY SEARCH PTY search...
  • Page 68 To cancel Advanced SCM — You can cancel the Advanced SCM (Sound Control Memory), and unlink the sound modes and the playback sources. When shipped from the factory, a different sound mode can be stored in memory for each source so that you can change the sound modes simply by changing the sources.
  • Page 69 To select the external component to use — EXT INPUT You can connect the external component to the CD changer jack on the rear using the Line Input Adaptor KS-U57 (not supplied). To use the external component as the playback source through this unit, you need to select which component —...

  • Page 70: Assigning Names To Cds

    Assigning names to CDs You can assign names to CDs. After assigning a name, it will appear on the display when you select the CD player or CD changer. Maximum number of the characters: Up to 32 characters (up to 40 discs) Note: You cannot assign a name to a CD Text.

  • Page 71: Using The Security Lock

    Using the security lock You can prohibit the unauthorized use of this unit by the others. To use the security lock, you need to set the password first. Once you set the password, the unit will ask you to enter the password when you turn on the unit for the first time after re-installation (or after recovering the car battery exhaustion).
  • Page 72 When Security Lock works? Once you register the password, “ appears on the display, and the unit will ask you to enter the password in the following cases: • When you turn on the unit for the first time after re-installing the unit.

  • Page 73: Cd Changer Operations

    We recommend that you use one of the CH-X series with your unit. If you have another CD automatic changer, consult your JVC IN-CAR ENTERTAINMENT dealer for connections. • For example, if your CD automatic changer is one of the KD-MK series, you need a cord (KS-U15K) for connecting it to this unit.

  • Page 74: Selecting Cd Playback Modes

    Disc number Ex.: When disc number 3 is selected To show the CD Text information This is possible only when connecting a JVC CD automatic changer equipped with CD Text reading capability. See “Playing a CD Text” on page 18.
  • Page 75 To play back tracks repeatedly (Repeat Play) Press MODE BAND while playing a CD. “MODE” appears on the display. BAND Within 5 seconds Press RPT (repeat), while “MODE” is still on the display, so that the RPT indicator lights up on the display.

  • Page 76: External Component Operations

    EXTERNAL COMPONENT OPERATIONS Playing an external component You can connect the external component to the CD changer jack on the rear using the Line Input Adaptor KS-U57 (not supplied). Preparations: • For connecting the Line Input Adaptor KS-U57 and the external component, refer to the Installation/ Connection Manual (separate volume).

  • Page 77: Dab Tuner Operations

    BAND We recommend that you use DAB (Digital Audio Broadcasting) tuner KT-DB1500 with your unit. If you have another DAB tuner, consult your JVC IN-CAR ENTERTAINMENT dealer. • Refer also to the Instructions supplied with your DAB tuner. What is DAB system? DAB is one of the digital radio broadcasting systems available today.

  • Page 78: Storing Dab Services In Memory

    Select a service you want to listen to. BAND 1 Press MODE BAND. “MODE” appears on the display. 2 Press to select a service you want, while “MODE” is still on the display. To change the display information while tuning into an ensemble Normally service name is shown on the display.

  • Page 79: Tuning Into A Preset Dab Service

    Press and hold the number button (in this example, 1) you want to store the selected service into for more than 2 seconds. Band number and “MEMO” appear alternately for a while. Repeat the above procedure to store other DAB services into other preset numbers.

  • Page 80: What You Can Do More With Dab

    What you can do more with DAB Tracing the same program automatically (Alternative Reception) You can keep listening to the same program. • While receiving a DAB service: When driving in an area where a service cannot be received, this unit automatically tunes in another ensemble or FM RDS station, broadcasting the same program.

  • Page 81: Troubleshooting

    The antenna is not connected firmly. No CD is in the magazine. This unit is not connected to a CD changer correctly. The CD player may function incorrectly. Security lock is in use. The built-in microcomputer may function incorrectly due to noise, etc.

  • Page 82: Maintenance

    • After starting the heater in the car • If it becomes very humid inside the car Should this occur, the CD player may malfunction. In this case, eject the CD and leave the unit turned on for a few hours until the moisture evaporates.

  • Page 83: Specifications

    [MW Tuner] Sensitivity: 20 V Selectivity: 35 dB [LW Tuner] Sensitivity: 50 V CD PLAYER SECTION Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of channels: 2 channels (stereo) Frequency Response: 5 Hz to 20 000 Hz...
  • Page 84 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Haben Sie PROBLEME mit dem Betrieb? Bitte setzen Sie Ihr Gerät zurück Siehe Seite Zurücksetzen des Geräts Vous avez des PROBLÈMES de fonctionnement? Réinitialisez votre appareil Référez-vous à...

  • Page 85: Problemen Oplossen

    Neem bij vragen of voor meer bijzonderheden over inbouwpakketten contact op met uw JVC car audio dealer of een dealer of een bedrijf dat inbouwpakketten levert.

  • Page 86: Electrical Connections

    Als het geluid niet verdwijnt, moet u contact opnemen met uw JVC car audio dealer. • Het maximum ingangsvermogen van de speakers moet...
  • Page 87 (not supplied). (See diagram externe Komponente Wenn Sie einen CD-Wechsler anschließen möchten, empfiehlt es sich, einen CD-Wechsler der Modellreihe CH-X zu Changeur CD JVC ou autre verwenden. appareil extérieur • Wenn Ihr CD-Wechsler zur Modellreihe KD-MK gehören, benötigen Sie ein anderes Kabel (KS-U15K).
  • Page 88 • Beide apparaten zijn volgens bovenstaande illustratie in serie aan te sluiten. External component / Externe Komponente / Appareil extérieur / Extern apparaat FOR KD-LX330R / FÜR DEN KD-LX330R / POUR LE KD-LX330R / VOOR KD-LX330R Signal cord (not supplied with this unit) Einzelleitung (nicht mit diesem Gerät mitgeliefert)

This manual is also suitable for:

Kd-lx330reKd-lx330rex

Table of Contents