Remove and discard the protective covers to expose the two metal fuser shipping screws
7.
The two metal fuser shipping screws MUST be removed and discarded. They are intended
to protect the fuser assembly during shipment. Failure to remove them will result in inferior
fusing of toner and possible damage to the toner assembly.
Using a coin or a flat head screwdriver with a wide blade, turning in a counter-clockwise direction,
8.
loosen the two metal fuser shipping screws.
Aug 01
GENICOM LN45 and Intelliprint mL450 User Guide 5-17
Replacing the EP cartridge (when options are installed)
Genicom
Publication No. GEG-99126
Comments to this Manuals
Latest comments: