LINE TERMINATORS
DECIPOINTS
SCS SMART GRAPHICS CAPABILITIES
Chapter 1. Introduction
Some control codes and escape sequences act as line terminators.
Line terminators cause all data received since the last terminator to
be printed. Without a terminator, data will remain buffered.
Throughout this manual decipoints are used as a unit of measure. A
decipoint equals 1/720th of an inch and is used as a standard of
measurement for parameters associated with set distances. A few
examples are margins, tabs, and vertical paper movements. See
Appendix D for the decipoint conversion tables.
The 5000 series printers have SCS smart graphics processing as a
standard feature that can be enabled via the CCU control panel
menus. The graphics emulations include both IGP and QMS Code V
version 2. There are separate programming manuals for each of these
graphics language emulations.
The graphics printing emulations provide capabilities for such things
as:
▪
Barcoding (including POSTNET codes)
▪
Rotated text
▪
Downloading of and host-controlled selection of predefined forms
▪
Loading of data into predefined forms
▪
Dynamic alphanumeric data
10
GEK-00029B
Comments to this Manuals
Latest comments: