Download Print this page
Coleman 2000008494 Setup Instructions
Coleman 2000008494 Setup Instructions

Coleman 2000008494 Setup Instructions

Advertisement

Quick Links

Before you begin
• Read all instructions before set up.
• Select a level site clear of rocks, branches, and other hard or
sharp objects, to install your tent.
WARNING: Keep clear of overhead power lines.
• Do not set up your tent under trees because of potential
lightning strikes or falling tree limbs in inclement weather.
• Secure with all stakes and guylines provided to prevent
property damage or personal injury.
• For best results in windy conditions, position narrow end of
tent into the wind.
• Enlist the help of at least one other person to assist you
when it is time to assemble the tent.
Pole Descriptions
No.
Description
1
Front & Rear Pole, back, longest
2
Side Pole, grey
3
Main Body Pole, black with red mark, long
4
Awning Pole, black, short
1
Layout & Positioning
of Tent and Poles
• Layout and position the tent with door facing desired
direction. (Fig. 1)
• Stake down tent corners first through the stake rings. (Fig. 2)
• Keep the floor taut.
• Stake down the remainder of the stake rings.
• Assemble all poles by unfolding and interlocking the shock-
corded pole sections.
• Insert the body poles into the pole sleeves.
1
2
Tent
Stake
Fig. 2
TENT SETUP INSTRUCTIONS
Qty.
Pole
Pole
Repair Kit
Replacement Kit
2
5010000539
5010000549
2
5010000540
5010000548
2
5010000569
5010000568
1
5010000543
5010000545
Pole
Fig. 1
Sleeve
Stake Ring
2
Connect Poles to Tent
• Insert one pin into one end of the pole. (Fig. 3 and 4)
• Go to opposite end of pole and carefully insert the pin into the
other pole end. (Fig. 4)
• Repeat for all poles.
Pole
Pin
2
Fig. 4
3
Attach Tent to Body Poles
3
Using Clips
• Attach clips along the edges of tent to body poles. (Fig. 5)
• Make any adjustments to the tent stakes, if needed.
4
Attach Rainfly
1
• Insert awning pole into pole sleeve located on underside of
rainfly. (Fig. 6)
• Drape rainfly over tent. (Fig. 7)
• Connect the elastic loops with "S" hooks, (found at the rainfly
corners) to the rings found at the tent corners. (Fig. 8)
• Insert the awning pole into the plastic caps. (Fig. 9)
• Secure rainfly with straps located on the underside of
rainfly. (Fig. 10)
• Attach and stake out guylines. (Fig. 7)
HINT: During setup, keep door zipped to keep proper tension
on fabric.
MODEL 2000008494
Plastic Caps
Fig. 3
Pole
Clip
Fig. 5
(continued on other side)

Advertisement

loading

Summary of Contents for Coleman 2000008494

  • Page 1 TENT SETUP INSTRUCTIONS MODEL 2000008494 Connect Poles to Tent Before you begin • Read all instructions before set up. • Select a level site clear of rocks, branches, and other hard or sharp objects, to install your tent. • Insert one pin into one end of the pole. (Fig. 3 and 4) WARNING: Keep clear of overhead power lines.
  • Page 2 This tent meets the flammability requirements of CPAI-84. The fabric may burn if left in continuous contact with any flame source. The application of any foreign substance to the tent fabric may render the flame-resistant properties ineffective. The Coleman Company, Inc. • 3600 North Hydraulic • Wichita, Kansas 67219 U.S.A. 1-800-835-3278 • www.coleman.com MADE IN BANGLADESH © 2010 The Coleman Company, Inc. All rights reserved. Coleman , and are registered trademarks of ®...