Generac Power Systems 20kW Owner's Manual page 21

Maintenance
Tasks
1. Disable the unit from
operating per the first page
warning.
2. Check the engine oil level.
Adjust as necessary.
3. Check the engine coolant
level. Adjust as necessary.
4. Check the engine coolant
thermal protection level.
Correct as necessary.
5. Check the natural gas
delivery system on gas
engine driven units.
Tighten connections as
necessary.
6. Check the air inlets and
outlets for debris. Clean as
necessary.
7. Check the battery
electrolyte level if
accessible. Adjust as
necessary.
8. Check the battery posts,
cables, and charger for
loose connections,
corrosion, and proper
operation. Correct as
necessary.
9. Check the unit wiring for
loose connections,
corrosion, and damage.
Correct as necessary.
10. Check the engine
accessory drive belts for
wear, weather cracking,
and damage. Replace as
necessary.
11. Visually inspect the unit
looking for leaks, wear or
damage, loose connections
or components, and
corrosion. Correct as
necessary.
12. Test the engine and
transfer switch safety
devices. Correct and/or
adjust as necessary.
09/05 A Rev. SrvSchd002
Standby Generator Sets
Service Schedule
Level 1
Recom- Task
mended Comp. to be done
to be done (Date- 3 months/
monthly Initials)
Level 2 Level 3
Required Task Required
Comp. to be done
(Date-
Break-in Initials) annually
11-2
Level 4
Task
Comp. Required
Semi- (Date- to be done
Initials) Annually
Task
Comp.
(Date-
Initials)