DeLonghi BAR 4 Instructions For Use Manual
DeLonghi BAR 4 Instructions For Use Manual

DeLonghi BAR 4 Instructions For Use Manual

Hide thumbs Also See for BAR 4:

Advertisement

bar 4/5732101400
9-06-2000 9:41
Pagina 1

Coffee Machine

Instructions for use

Advertisement

Table of Contents
loading

Summary of Contents for DeLonghi BAR 4

  • Page 1: Coffee Machine

    4/5732101400 9-06-2000 9:41 Pagina 1 Coffee Machine Instructions for use...
  • Page 2: Description Of The Appliance

    4/5732101400 9-06-2000 9:41 Pagina 2 DESCRIPTION OF THE APPLIANCE Water tank Carafe with lid Tank cap Filter holder Steam knob Filter Steam tube with cappuccino nozzle Measuring spoon Power cable ON/OFF Switch Drip tray...
  • Page 3 4/5732101400 9-06-2000 9:41 Pagina 3...
  • Page 4 4/5732101400 9-06-2000 9:41 Pagina 4...
  • Page 5: Installation

    4/5732101400 9-06-2000 9:41 Pagina 5 Please read this instruction booklet INSTALLATION carefully before installing the Position the appliance on a level surface appliance and keep it handy for futu- away from faucets and wash basins. re consultation. In so doing you will...
  • Page 6: Making Cappuccino

    4/5732101400 9-06-2000 9:41 Pagina 6 on the machine lid (fig. 7). At this point press 3 Then follow steps 1-9 in the section "Making filter-holder upwards while at the same time Espresso Coffee". rotating clockwise all the way. It does not N o t e that the amount of water needed to matter if the filter housing bowl’s handle is not...
  • Page 7: Cleaning And Maintenance

    4/5732101400 9-06-2000 9:41 Pagina 7 HINTS DESCALING If you live in a hard-water area, minerals and cal- Making good espresso and cappuccino is not dif- cium found in the water will accumulate and ficult however it does require practice. The fol- affect the operation of the machine.
  • Page 8 4/5732101400 9-06-2000 9:41 Pagina 8 ELECTRICAL CONNECTION (UK ONLY) If your appliance comes fitted with a plug, it will incorporate a If the plug is a moulded-on type, the fuse cover must be re-fitted 13 Amp fuse. If it does not fit your socket, the plug should be cut...

Table of Contents