Select The Required Options; Start The Programme; Select The Delay Start Option; At The End Of The Programme - Electrolux EW 1065 F Instruction Booklet

7. Select the required options

The light corresponding to the depressed button
illuminates.

8. Select the DELAY START option

To delay starting of a programme, press the DELAY
START button. The figures corresponding to the
selected delay will be displayed for about 4 seconds,
after which the duration of the selected programme
will appear on the display.
When the START/PAUSE button is pressed, the
selected delay will again appear on the display and
the machine starts its countdown.

9. Start the programme

To start the selected programme, press the
START/PAUSE button; the corresponding light stops
flashing.
The pilot light corresponding to the wash phase
which is running is on.
The door light comes on to indicate that the door is
locked.
The machine starts operating.

10. At the end of the programme

The machine stops automatically.
If the anti-crease
light of the START/PAUSE button
indicate that the water must be emptied out before
opening the door.
The machine is fitted with a safety device that
prevents opening of the door for about 2-3 minutes
after the end of the programme. The door can only
be opened after the door locked light has gone out.
Release of the lock is also indicated by the coming
on of the light .
Turn the programme selector dial to Reset O.
Switch the machine off by pressing the ON/OFF
button .
Remove the laundry from the drum and carefully
check that the drum is empty so as to avoid any
forgotten items being damaged in a subsequent
wash (e.g. shrinking) or their colour running into a
load of whites.
If you do not intend to carry out another wash, close
the water tap.
Leave the door open to prevent the formation of
mildew and unpleasant smells.
43
option has been selected, the
flashes to