Table of Contents
Advertisement
3 Tap a found network to connect it (if necessary,
Network SSID
Security
enter
,
Connect
tap
).
When your smartphone connects, the Wi-Fi status
indicator
appears in the status bar.
Note: If you see a question mark in the Wi-Fi status
indicator
, drag the status bar down, tap the network, and
enter the network's password.
Tip: When Wi-Fi power is on, your smartphone automatically
reconnects to available networks it has used before.
Manage networks
To remove a network, tap it in the list, then tap
To manage your networks, tap Apps
turn Wi-Fi power on, then tap Menu >
Wi-Fi hotspot
Your can make your smartphone a Wi-Fi hotspot to provide
portable, convenient internet access to other Wi-Fi enabled
devices.
Note: Keep it secure. To protect your smartphone and hotspot
from unauthorized access, it is strongly recommended that you
set up hotspot security (WPA2 is the most secure), including
password.
Find it: Tap Apps
>
Mobile Hotspot
and check
Wireless password
, and
Forget
Settings
>
Manage Networks
Settings
More
Tethering &
>
>
Mobile Hotspot
1 Your smartphone turns off
, and
network for internet access. Tap
Configure Mobile Hotspot
>
SSID
•
Security
•
WPA2
will need to access your Wi-Fi hotspot.
Note:
Channel
•
has been active for a while, try different channels.
Save
2 Tap
.
When your Wi-Fi hotspot is active, other Wi-Fi enabled devices
Wi-Fi
can connect by entering your hotspot's
>
,
Security
type, and entering the correct
.
Wi-Fi modes
For those who like to get a bit more technical, your smartphone
supports the following Wi-Fi modes: 802.11a, b, g, n.
Wi-Fi
power and uses the mobile
Mobile Hotspot Settings
to set up security:
: Enter a unique name for your hotspot.
: Select the type of security you want:
WPA2
. For
, enter a unique password that others
WPA2
is recommended by IEEE.
: If you notice interference after your hotspot
when the settings are complete.
Open
or
SSID
, selecting a
Wireless password
.
Connect & transfer
51
Advertisement
Table of Contents
