Basic Operation; All Metal - Bounty Hunter Fortune Hunter Owner's Manual

BASIC OPERATION

TURNING ON YOUR DETECTOR
Turn the left knob (SENSITIVITY) to the right. As the knob clicks to the "On"
position, the detector sounds three tones, the LCD arrows appear
momentarily, and the unit pre-sets to the ALL METAL mode of operation.
SET THE MODE

1. ALL METAL

• Press the ALL METAL touchpad
The unit will emit sound when passing over all types of metal objects.
The ALL METAL mode offers the greatest depth detection capability.
2. DISCRIMINATE
A. Press the DISC touchpad
B. Slowly turn the right knob (DISC/NOTCH) clockwise.
All iron or ferrous objects are eliminated from detection. As you turn the
DISC/NOTCH knob clockwise you can eliminate foil, pull tabs, screw
caps, and zinc pennies.
3. AUTO NOTCH
Press the AUTO NOTCH touchpad, and the detector will automatically
reject iron and most pull-tabs. Nickels and many small gold rings will be
retained. The DISC/NOTCH knob creates a rejection "window" which
can be moved as it is turned clockwise. With this mode, you can reject
screw caps and zinc (post 1982) pennies as the DISC/NOTCH control is
turned clockwise, but still detect valuables with low and high tones.
Note:
If you are not sure of your current mode setting, simply press the desired
touch-pad again.
6