●
Install the all-in-one near an outlet that you can easily reach. Disconnect the all-in-one by
grasping the plug firmly and pulling it from the outlet. Never disconnect the all-in-one by pulling
the cord.
●
Turn the all-in-one off when not in use. You can substantially increase the life expectancy of the
all-in-one by turning off the all-in-one when not in use.
NOTE:
●
Slots and openings in the cabinet are provided for ventilation. These openings must not be
blocked or covered. Never push objects of any kind into cabinet slots or other openings.
●
Do not drop the all-in-one or place it on an unstable surface.
●
Do not allow anything to rest on the power cord. Do not walk on the cord.
●
Keep the all-in-one in a well-ventilated area, away from excessive light, heat or moisture.
●
When removing the all-in-one stand, you must lay the all-in-one face down on a soft area to
prevent it from getting scratched, defaced, or broken.
Cleaning the all-in-one
1.
Turn off the all-in-one and unplug the power cord from the back of the unit.
2.
Dust the all-in-one by wiping the screen and the cabinet with a soft, clean antistatic cloth.
3.
For more difficult cleaning situations, use a 50/50 mix of water and Isopropyl alcohol.
CAUTION:
surface. Never spray the cleaner directly on the screen surface. It may run behind the bezel and
damage the electronics.
CAUTION:
thinner, or any volatile substance to clean the all-in-one screen or cabinet. These chemicals may
damage the all-in-one.
Shipping the all-in-one
Keep the original packing box in a storage area. You may need it later if you move or ship the all-in-
one.
All-in-one with a "burned-in image" are not covered under the HP warranty.
Spray the cleaner onto a cloth and use the damp cloth to gently wipe the screen
Do not use cleaners that contain any petroleum based materials such as benzene,
Maintenance guidelines
23