Voice Announce Calls; Placing Calls - NEC Univerge DT310 User Manual

VOICE ANNOUNCE CALLS

To make:
1. Dial the desired extension and Dial 1 or press Voice
Softkey.
2. Speak.
To Receive:
1. Adjust the Speaker volume as needed.
2. Respond handsfree.
If the MIC is not lit the receiving extension
Note:
cannot answer voice announce calls without
lifting the handset.
Camp-on (Call Waiting)
Receive the camp-on tone while on another call:
1. When a Camp On is set from another station,
complete the present call and a Call Back will ring
the station that set the Camp On.
2. When the Camp On station answers and rings the
phone, lift the handset or press the Speaker key.
Off Hook Signaling
With a call in progress:
1. Receive Off-Hook signaling.
2. Press the Answer key, then converse with the
second party.
2-11 MON 10:56AM
TALKING TO
Conf
The second call may be placed on Hold.
Note 1:
Note 2: Press the flashing Line key or Conf key to
return to the first call.

PLACING CALLS

Internal Calls
1. Lift the handset.
2. Dial a station number or 9 (for attendant).
3. Voice announce after the tone burst, or wait for the
ringing call to be answered.
Outside Calls
1. Lift the handset.
2. Dial the trunk access code (i.e. 0).
-OR-
Press an idle Programmable Outside Line key.
3. Dial the telephone number.
4. Converse.
Line 001
Conf
24
STA 12345
00:15
2142622000
Rpt Save Trf