Table of Contents
Advertisement
Instructions for use
GB
English, 1
WDL 5290 P/G/A/K
!
This symbol reminds you to read this booklet.
Contents
Installation, 2-3-4-5
Connecting the electricity and water supplies
Starting a wash cycle
Wash cycles, 8
Cutting off the water or electricity supply
Troubleshooting, 13-14
Assistance, 15-16
WASHER-DRYER
1
GB
Advertisement
Table of Contents
Related Manuals for Hotpoint WDL 5290 P
Summary of Contents for Hotpoint WDL 5290 P
-
Page 1: Table Of Contents
6-7 Control panel Indicator lights Starting a wash cycle Wash cycles, 8 Table of wash cycles WDL 5290 P/G/A/K Personalisation, 9 Setting the temperature Setting the drying cycle Functions Detergents and laundry, 10 Detergent dispenser drawer... -
Page 2: Installation
Installation 2. If the floor is not perfectly level, compensate for any Keep this instruction manual in a safe place for future unevenness by tightening or loosening the adjustable reference. Should the appliance be sold, transferred or front feet (see figure); the angle of inclination, measu- moved, make sure the instruction manual accompanies the red according to the worktop, must not exceed 2°. - Page 3 Connecting the drain hose • the supply voltage is included within the values indicated on the Technical details table Connect the drain hose, (see page 5); without bending it, to a draining duct or a wall • the socket is compatible with the washing drain situated between machine’s plug.
-
Page 4: The First Wash Cycle
As the colours of the wires in the lead may not corre- The first wash cycle spond with the coloured markings identifying the termi- nals in your plug, proceed as follows: Once the appliance has been installed, and before you Connect Green &... -
Page 5: Technical Data
Technical data Model WDL 5290 P/G/A/K width 59.5 cm Dimensions height 85 cm depth 53.5 cm from 1 to 7 kg for the wash programme Capacity from 1 to 4 kg for the drying programme Electrical please refer to the technical data plate... -
Page 6: Description Of The Washer-Dryer And Starting A Wash Cycle
Description of the Washer-dryer and starting a wash cycle Control panel WASH CYCLE PROGRESS indicator lights DRYING knob ON/OFF button DOOR TEMPERATURE LOCKED knob indicator light START/PAUSE Detergent dispenser drawer button with FUNCTION indicator light buttons with WASH CYCLE indicator lights knob Detergent dispenser drawer: used to dispense de- START/PAUSE button with indicator light: starts or... -
Page 7: Indicator Lights
Indicator lights Door locked indicator light If this indicator light is on, the appliance door is locked to prevent it from being opened accidentally; to avoid any The indicator lights provide important information. damage, wait for the indicator light to switch off before you This is what they can tell you: open the appliance door. -
Page 8: Wash Cycles
Wash cycles Table of wash cycles Detergents Max. Max. Max. Cycle Description of the wash cycle temp. speed Drying load duration (°C) (rpm) (kg) Fabric Wash softener Essentials cycles 1 Cottons: extremely soiled whites. 90° 1200 160' 1 Cottons (1): heavily soiled whites. -
Page 9: Personalisation
Personalisation Setting the temperature Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles). The temperature may be lowered, or even set to a cold wash ( ). The Washer-dryer will automatically prevent you from selecting a temperature which is higher than the maximum value set for each wash cycle. -
Page 10: Detergents And Laundry
Detergents and laundry Garments requiring special care Detergent dispenser drawer Baby cycle: this wash cycle 6 can be used to remove the Good washing results also depend on the correct dose soiling typically caused by babies, while ensuring that all of detergent: adding too much detergent will not neces- detergent is removed from nappies in order to prevent sarily result in a more efficient wash, and may in fact a... -
Page 11: Precautions And Tips
Precautions and tips • Do not use the appliance to dry foam rubber or This Washer-dryer was designed and constructed in similar elastomers. accordance with international safety regulations. The • Make sure that the water tap is turned on during following information is provided for safety reasons and the drying cycles. -
Page 12: Care And Maintenance
Care and maintenance Cutting off the water and electricity sup- To access the pre-chamber: plies 1. using a screwdriver, remove the cover panel • Turn off the water tap after every wash cycle. This on the lower front part of will limit wear on the hydraulic system inside the the washing machine (see Washer-dryer and help to prevent leaks. -
Page 13: Troubleshooting
Troubleshooting Your Washer-dryer could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be not solved easily using the following list. Problem: Possible causes / Solutions: The machine does not switch on. • The appliance is not plugged into the socket fully, or not enough to make contact. - Page 14 The machine leaks from the • The dispenser drawer is blocked with detergent and requires cleaning. dispenser. • The water pressure is too high and requires turning down - turn down the tap on the water supply pipe slightly and try again. • The machine is tilting forwards - It must be level when in its final position. • The fill hose is loose, check both the cabinet and tap ends. The machine leaks (other than dispenser). • The fill hose is tight but still leaks, if so replace the rubber washers, or the fill hose is missing the rubber washer. • The drain hose is not fixed in properly. The ‘START/PAUSE’...
-
Page 15: Assistance
Assistance Guarantee 12 Months Parts and Labour Guarantee Your appliance has the benefit of our manufacturer’s guarantee, which covers the cost of breakdown repairs for twelve months from the date of purchase. This gives you the reassurance that if, within that time, your appliance is proven to be defective because of either workmanship or materials, we will, at our discretion, either repair or replace the appliance at no cost to you. -
Page 16: After Sales Service
UK: 08448 24 24 24 Republic of Ireland: 01 230 0800 www.hotpointservice.co.uk Indesit Company UK Ltd. Morley Way, Peterborough, PE2 9JB Indesit Company Unit 49 Airways Industrial Estate,Dublin 17 Recycling & Disposal Information As part of Hotpoint’s continued commitment to helping the environment, Hotpoint reserves the right to use quality, recycled components to keep down customer costs and minimise material wastage.