Terminal Setup With The Up/Down Key; Terminal Setup With The Feature Key - NEC UNIVERGE DT310 User Manual

2.
T
ERMINAL
This chapter describes operating procedures for
terminal settings by the UP/DOWN Key and Feature
Keys.
Various terminal settings such as display, sounds,
password, and language are also available from Menu
Key.
Terminal Setup With the Up/Down
Key
To Adjust Handset Receiver Volume
Press the Up/Down key in the off-hook status or during
the call.
HANDSET
To Adjust Speaker Volume
Press the Up/Down key during speakerphone
operation or during the call.
SPEAKER
To Adjust Ringer Tone
Press the Up/Down key during ringing.
S
ETUP
To Adjust LCD Contrast
Press the Up/Down key in the on-hook status.
Note:
Terminal Setup With the Feature
Key
Microphone On/Off
LED on Mic key shows the status of the built-in
microphone.
To Access on the 6/24/32 Button DT310/DT330/
DT710/DT730
Either press MIC Key, or press Feature and 1 or
press Soft Key associated with MIC.
To Access on the 2 Button DT310
Either press MIC Key, or press Feature and 1.
17
RING
LCD
The 2-Button Handset does not have a display.