Always there to help you Register your product and get support at www.philips.com/welcome SBT10 Question? Contact Philips User manual...
Page 2
Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and return your Product Registration Card at once, or register online at www.philips.com/welcome to Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below,so don't miss out.
Contents 1 Important safety instructions 2 Your portable speaker Introduction What's in the box Overview of the speaker 3 Get started Charge the built-in battery Power on/off 4 Use Bluetooth devices Connect a device Play audio via Bluetooth Make a call Clear the pairing information 5 Listen to an external device 6 Product information...
1 Important safety • Danger of explosion if battery is incorrectly replaced. Replace only with instructions the same or equivalent type. a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. Warning f Clean only with dry cloth.
2 Your portable speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this speaker, you can • listen to audio from an external device via Bluetooth connection, • listen to audio from an external device through the AUX socket, and •...
Overview of the speaker d Bluetooth indicator • Indicate the current Bluetooth • Power the speaker on or off. connection status. • When the speaker is powered e AUX off, press and hold to clear pairing • Connect to an external player. information.
3 Get started Power on/off Press and hold for 2 seconds. Always follow the instructions in this chapter in sequence. Note • If an audio input cable is connected to the AUX socket, Charge the built-in battery this product does not automatically power off. To save battery power, disconnect the audio input cable or manually power off the product after use.
• Make sure that no audio input cable is connected to Reconnect a device the AUX socket. • Philips does not guarantee the compatibility with all • For a paired Bluetooth device on which Bluetooth devices. • Before pairing a device with this system, read its user the automatic reconnection is enabled, manual for Bluetooth compatibility.
Make a call Buttons Functions Press to answer an incoming call. Press to end the current call. Press and hold to reject an incoming call. Press twice to dial the last called number. Press twice to hold on the current call and answer another incoming call.
5 Listen to an external device You can also listen to an external audio device, for example, MP3 player, through this product. Connect an audio input cable with a 3.5 mm connector on both ends to • the AUX socket on this product, and • the headphone socket on the external device.
6 Product information Note • Product information is subject to change without prior notice. General information Power Supply (through USB 5 V, 0.6 A socket) Built-in Battery Lithium battery Dimensions - Main Unit (W x 107 x 71 x H x D) 36 mm Weight - Main Unit 0.12 kg Bluetooth Bluetooth specification V2.1+EDR...
If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available. General No power •...
RF Radiation Exposure Statement: This Philips Consumer Lifestyle may void the user’s equipment complies with FCC’s and IC’s RF authority to operate the equipment. radiation exposure limits set forth for an uncontrolled environment.
Page 15
Some states do not allow the exclusions or limitation of inciden- Philips is not liable for any damage to or loss of any programs, tal or consequential damages, or allow limitations on how long an...