Asus Z87-PRO V EDITION Manual
  1. Manuals
  2. Brands
  3. Asus Manuals
  4. Motherboard
  5. Z87-PRO V EDITION
  6. Manual

Asus Z87-PRO V EDITION Manual

Motherboards
Hide thumbs
Table of Contents

Advertisement

Quick Links

Z87-PRO
(V EDITION)
IMPORTANT:
The Wi-Fi and Bluetooth hardware
module is not available on this
motherboard model.

Advertisement

Table of Contents
loading

Related Manuals for Asus Z87-PRO V EDITION

Summary of Contents for Asus Z87-PRO V EDITION

  • Page 1 Z87-PRO (V EDITION) IMPORTANT: The Wi-Fi and Bluetooth hardware module is not available on this motherboard model.
  • Page 2 Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.

  • Page 3: Table Of Contents

    Product highlights................ 1-1 1.1.2 Dual Intelligent Processors 4 with 4-Way Optimization ....1-2 1.1.3 ASUS Exclusive Features ............1-3 1.1.4 ASUS Quiet Thermal Solution ............. 1-4 1.1.5 ASUS EZ DIY ................1-4 1.1.6 Other special features ..............1-5 Motherboard overview ................1-6 1.2.1...
  • Page 4 3.6.9 Network Stack ................3-38 Monitor menu ................... 3-39 Boot menu ....................3-42 Tools menu ....................3-48 3.9.1 ASUS EZ Flash 2 Utility ............3-48 3.9.2 ASUS O.C. Profile ..............3-48 3.9.3 ASUS SPD Information ............. 3-49 3.10 Exit menu ....................3-50 3.11...
  • Page 5 Creating a RAID driver disk without entering the OS ....5-7 5.2.2 Creating a RAID driver disk in Windows ........5-8 ® 5.2.3 Installing the RAID driver during Windows OS installation ..5-8 ® Appendices Notices ........................A-1 ASUS contact information ..................A-5...

  • Page 6: Safety Information

    Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.

  • Page 7: About This Guide

    Refer to the following sources for additional information and for product and software updates. ASUS websites The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information. Optional documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer.

  • Page 8: Conventions Used In This Guide

    Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task IMPORTANT: Instructions that you MUST follow to complete a task.

  • Page 9: Z87-Pro (V Edition) Specifications Summary

    Z87-PRO (V EDITION) specifications summary LGA1150 socket for the 4th Generation Intel Core™ i7/Intel ® ® Core™i5/ Intel Core™ i3, Pentium and Celeron processors ® ® ® Supports 22nm CPU Supports Intel Turbo Boost Technology 2.0* ® * The Intel Turbo Boost Technology 2.0 support depends on the CPU ®...
  • Page 10 - Supports jack-detection, multi-streaming and front panel jack- retasking - Optical S/PDIF out ports at rear I/O Intel Z87 Express Chipset - supports ASUS USB 3.0 ® Boost - 2 x USB 3.0/2.0 ports at mid-board for front panel support - 2 x USB 3.0/2.0 ports at rear panel (blue)
  • Page 11 - ASUS Fan Xpert 2 - ASUS Fanless Design: Heat-sink solution ASUS EZ DIY - ASUS USB BIOS Flashback with USB BIOS Flashback Wizard for EZ BIOS download scheduling - ASUS UEFI BIOS EZ Mode featuring friendly graphics user interface - ASUS O.C.
  • Page 12 SFS (Stepless Frequency Selection) - BCLK��PCIE frequency tuning from �0MHz up to 300MHz at 0.1MHz increment Overclocking Protection - ASUS C.P.R.(CPU Parameter Recall) Rear Panel I/O Ports 1 x PS/2 Keyboard/mouse combo port 1 x DisplayPort 1 x HDMI port...
  • Page 13 BIOS features 64 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI2.7, WfM2.0, SM BIOS 2.7, ACPI 5.0, Multi-language BIOS, ASUS EZ Flash 2, ASUS CrashFree BIOS 3, My Favorites, Quick Note, Last Modified log, F12 PrintScreen, F3 Shortcut functions, and ASUS DRAM SPD...

  • Page 14: Package Contents

    If any of the above items is damaged or missing, contact your retailer. • The illustrated items above are for reference only. Actual product specifications may vary with different models. • The 1 x 2-in-1 ASUS Q-Connector kit is for retailer version only.

  • Page 15: Installation Tools And Components

    Installation tools and components 1 bag of screws Philips (cross) screwdriver PC chassis Power supply unit Intel LGA1150 CPU Intel LGA1150 compatible CPU Fan ® ® DIMM SATA hard disk drive SATA optical disc drive (optional) Graphics card (optional) The tools and components in the table above are not included in the motherboard package.

  • Page 17: Chapter 1: Product Introduction

    3D graphics, multimedia and Internet applications. Quad-GPU SLI and CrossFireX™ Support This motherboard features the most powerful Intel Z�7 platform that optimizes PCIe ® allocation in multi-GPU SLI and CrossFireX™ solution, giving you a brand-new gaming enjoyment. ASUS Z87-PRO (V EDITION)

  • Page 18: Dual Intelligent Processors 4 With 4-Way Optimization

    1.1.2 Dual Intelligent Processors 4 with 4-Way Optimization ASUS Dual Intelligent Processors 4 brings system control solution to a totally whole new level, combining TPU, EPU, DIGI+ Power Control and Fan Xpert 2 functions to push the system’s performance to its optimal potential. It automatically pushes or reasonably balances the system’s performance, power saving levels and fan settings via the user-friendly AI Suite...

  • Page 19: Asus Exclusive Features

    ASUS Exclusive Features USB 3.0 Boost ASUS USB 3.0 Boost, which supports USB 3.0 standard UASP (USB Attached SCSI Protocol), significantly increases a USB device’s transfer speed up to 170% faster than the already impressive USB 3.0 transfer speed. It automatically accelerates data speeds for compatible USB 3.0 peripherals without the need for any user interaction.

  • Page 20: Asus Quiet Thermal Solution

    The heatsink design also lowers the temperature of the chipset and power phase area through high efficient heat-exchange. Combined with usability and aesthetics, the ASUS stylish heatsink will give you an extremely silent and cooling experience with its elegant appearance.

  • Page 21: Other Special Features

    ASUS Q-connector ASUS Q-Connector is a unique adapter that allows you to easily connect or disconnect the chassis front panel cables to one module, eliminating the hassle of plugging one cable at a time and making the connection quick and accurate.

  • Page 22: Motherboard Overview

    Motherboard overview 1.2.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.

  • Page 23: Motherboard Layout

    1.2.2 Motherboard layout Refer to 1.2.8 Internal connectors and 2.3.1 Rear I/O connection for more information about rear panel connectors and internal connectors. ASUS Z87-PRO (V EDITION)

  • Page 24: Layout Contents

    Layout contents Connectors/Jumpers/Slots Page 1. ATX power connectors (24-pin EATXPWR, 8-pin EATX12V) 1-44 2. LGA1150 CPU socket 3. CPU, chassis, and power fan connectors (4-pin CPU_FAN, 4-pin 1-42 CPU_OPT, 4-pin CHA_FAN1-4 ) 4. DDR3 DIMM slots 1-10 5. MemOK! button 1-26 6.

  • Page 25: Central Processing Unit (Cpu)

    Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will shoulder the cost of repair only if the damage is shipment/ transit-related.

  • Page 26: System Memory

    1.2.4 System memory The motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) slots. A DDR3 module is notched differently from a DDR or DDR2 module. DO NOT install a DDR or DDR2 memory module to the DDR3 slot. Recommended memory configurations Chapter 1: Product introduction 1-10...

  • Page 27: Memory Configurations

    Always install the DIMMS with the same CAS Latency. For an optimum compatibility, we recommend that you install memory modules of the same version or data code (D/ C) from the same vendor. Check with the vendor to get the correct memory modules. ASUS Z87-PRO (V EDITION) 1-11...
  • Page 28 Z87-PRO (V EDITION) Motherboard Qualified Vendors Lists (QVL) DDR3 2800(O.C.) MHz capability Vendors Part No. Size Chip Chip Timing Voltage DIMM socket Brand support (Optional) G.SKILL F3-2800C11Q-16GTXD(XMP) 16GB (4x4GB) 11-13-13-35 1.65 • • • G.SKILL F3-2800C12Q-32GTXD(XMP) 32GB (4x8GB) 12-13-13-35 1.65 •...
  • Page 29 Chip Chip Timing Voltage DIMM socket Brand support (Optional) G.SKILL F3-17600CL7D-4GBFLS(XMP) 4GB (2x2GB) 7-10-10-28 1.65 • • GEIL GET34GB2200C9DC(XMP) 4GB (2x2GB) 9-10-9-28 1.65 • • • GEIL GET38GB2200C9ADC(XMP) 8GB (2x4GB) 9-11-9-28 1.65 • • • ASUS Z87-PRO (V EDITION) 1-13...
  • Page 30 DDR3 2133(O.C.) MHz capability Vendors Part No. Size Chip Chip Timing Voltage DIMM socket Brand support (Optional) A-DATA AX3U2133XC4G10(XMP) 10-11-11-30 1.65 • • • A-DATA AX3U2133XW8G10(XMP) 10-11-11-30 1.65 • • • Apacer 78.BAGE4.AFD0C(XMP) 8GB (2x4GB) 9-9-9-24 • • • Apacer AHU04GFB33CAQ3R(XMP) 11-13-13-31 •...
  • Page 31 • • 8.16)(XMP) CORSAIR CMZ32GX3M4X1866C10 32GB (4x8GB) 10-11-10-27 • • • (Ver3.23)(XMP) CORSAIR CMZ32GX3M4X1866C10(Ver 32GB (4x8GB) 10-11-10-27 • • • 3.23)(XMP) CORSAIR CMZ8GX3M2A1866C9 8GB (2x4GB) 9-10-9-27 • • • (Ver8.16)(XMP) (continued on the next page) ASUS Z87-PRO (V EDITION) 1-15...
  • Page 32 DDR3 1866(O.C.) MHz capability Vendors Part No. Size Chip Chip Timing Voltage DIMM socket Brand support (Optional) CORSAIR CMZ8GX3M2A1866C9(XMP) 8GB (2x4GB) 9-10-9-27 • • CORSAIR CMZ8GX3M2A1866C9G 8GB (2x4GB) 1866 9-10-9-27 • • • (Ver5.12)(XMP) Crucial BLE4G3D1869DE1XT0.16F 9-9-9-27 • • • MD(XMP) G.SKILL F3-14900CL10Q2-...
  • Page 33 9-9-9-24 • • • 2.12)(XMP) (4x2GB) CORSAIR HX3X12G1600C9(XMP) 12GB 9-9-9-24 • • • (6x2GB) Crucial BL12864BN1608 .8FF(XMP) 8-8-8-24 1.65 • • • (2x1GB) Crucial BLT4G3D1608DT1TX0.16F 8-8-8-24 • • • M(XMP) (continued on the next page) ASUS Z87-PRO (V EDITION) 1-17...
  • Page 34 DDR3 1600 MHz capability Vendors Part No. Size Chip Chip NO. Timing Voltage DIMM socket Brand support (Optional) EK Memory EKM324L28BP8- 4GB (2x2GB) • • • I16(XMP) EK Memory EKM324L28BP8- 4GB (2x2GB) • • • I16(XMP) Elixir M2X2G64CB88 G7N- Elixir N2CB2G80GN- 9-9-9-28 •...
  • Page 35 Silicon SP004GBLTU16 S-POWER 20YT5NG 9-9-9- • • • Power 0V02(XMP) Team TXD34096M1600HC9- Hynix H5TC2G83BFRH9A 9-9-9- • • • D(XMP) Transcend JM1600KLH- Transcend TK963EBF3 • • • 8G(626633) Transcend TS1GLK64V SAMSUNG K4B4G0846B • • • 6H(620945) ASUS Z87-PRO (V EDITION) 1-19...
  • Page 36 DDR3 1333 MHz capability Vendors Part No. Size Chip Brand Chip NO. Timing Voltage DIMM socket support (Optional) ACTICA ACT1GHU64B SAMSUNG K4B1G0846F • • • 8F1333S ACTICA ACT1GHU72C SAMSUNG K4B1G0846F(ECC) • • • 8G1333S ACTICA ACT2GHU64B Micron D9KPT • • •...
  • Page 37 • • Mach Xtreme MXD3U1333 16GQ 16GB (4x4GB) • • • Mach Xtreme MXD3V1333 2GS Mach C2S46D30- • • • Xtreme D313 MICRON MT8JTF25664AZ- MICRON D9PFJ • • • 1G4M1 (continued on the next page) ASUS Z87-PRO (V EDITION) 1-21...
  • Page 38 Hyper DIMM support is subject to the physical characteristics of individual CPUs. Load the X.M.P. or D.O.C.P. settings in the BIOS for the hyper DIMM support. • Visit the ASUS website for the latest QVL. Chapter 1: Product introduction 1-22...

  • Page 39: Expansion Slots

    Slot No. Slot Description PCIe 2.0 x1_1 slot PCIe 3.0/2.0 x16_1 slot PCIe 2.0 x1_2 slot PCIe 2.0 x1_3 slot PCIe 3.0/2.0 x16_2 slot PCIe 2.0 x1_4 slot PCIe 2.0 x16_3 slot ASUS Z87-PRO (V EDITION) 1-23...
  • Page 40 PCIe Express 3.0 operating mode VGA configuration PCIe 3.0/2.0 x16_1 PCIe 3.0/2.0 x16_2 x16 (single VGA Single VGA/PCIe card recommended) Dual VGA/PCIe card • We recommend that you provide sufficient power when running CrossFireX™ or SLI™ mode. • Connect a chassis fan to the motherboard connector labeled CHA_FAN1-4 when using multiple graphics cards for better thermal environment.

  • Page 41: Onboard Buttons And Switches

    The button also lights up when the system is plugged to a power source indicating that you should shut down the system and unplug the power cable before removing or installing any motherboard component. ASUS Z87-PRO (V EDITION) 1-25...

  • Page 42: Memok! Switch

    BIOS has been restored to its default settings. • We recommend that you download and update to the latest BIOS version from the ASUS website at www.asus.com after using the MemOK! function. Chapter 1: Product introduction 1-26...
  • Page 43 Turn off your system using the power-on button to allow your system to go through POST (without entering the BIOS) when you reboot your system. • Refer to section 3.8 Boot Menu for details about setting the DirectKey default function. ASUS Z87-PRO (V EDITION) 1-27...
  • Page 44 TPU switch With its two-level adjustment functions, the TPU allows you to automatically adjusts the CPU ratio and clock speed for an optimal system performance. • Enable this switch when the system is powered off. • When the TPU switch is set to Enabled (TPU_I: CPU Ratio Boost), the system automatically adjusts the CPU ratio for an enhanced performance.
  • Page 45 • You may change the EPU settings in the software application or BIOS setup program and enable the EPU function at the same time. However, the system will use the last setting you have made. ASUS Z87-PRO (V EDITION) 1-29...

  • Page 46: Jumper

    1.2.7 Jumper Clear RTC RAM (3-pin CLRTC) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data.

  • Page 47: Onboard Leds

    (Power-On-Self Test): CPU, memory modules, VGA card, and hard disk drive.s If an error is found, the critical component’s LED stays lit up until the problem is solved. TPU LED The TPU LED lights up when the TPU switch is enabled. ASUS Z87-PRO (V EDITION) 1-31...
  • Page 48 EPU LED The EPU LED lights up when the EPU switch is enabled. Q-Code LED The Q-Code LED design provides you with a 2-digi error code that displays the system status. Refer to the Q-Code table on the next page for details. Chapter 1: Product introduction 1-32...

  • Page 49: Q-Code Table

    Unspecified memory initialization error Memory not installed Invalid CPU type or Speed CPU mismatch CPU self test failed or possible CPU cache error CPU micro-code is not found or micro-code update is failed (continued on the next page) ASUS Z87-PRO (V EDITION) 1-33...
  • Page 50 Code Description Internal CPU error Reset PPI is not available 5C – 5F Reserved for future AMI error codes S3 Resume is stared (S3 Resume PPI is called by the DXE IPL) S3 Boot Script execution Video repost OS S3 wake vector call E4 –...
  • Page 51 9E – 9F Reserved for future AMI codes IDE initialization is started IDE Reset IDE Detect IDE Enable SCSI initialization is started SCSI Reset SCSI Detect SCSI Enable Setup Verifying Password (continued on the next page) ASUS Z87-PRO (V EDITION) 1-35...
  • Page 52 Code Description Start of Setup Reserved for ASL (see ASL Status Codes section below) Setup Input Wait Reserved for ASL (see ASL Status Codes section below) Ready To Boot event Legacy Boot event Exit Boot Services event Runtime Set Virtual Address MAP Begin Runtime Set Virtual Address MAP End Legacy Option ROM Initialization System Reset...
  • Page 53 System is waking up from the S3 sleep state System is waking up from the S4 sleep state System has transitioned into ACPI mode. Interrupt controller is in PIC mode. System has transitioned into ACPI mode. Interrupt controller is in APIC mode. ASUS Z87-PRO (V EDITION) 1-37...

  • Page 54: Internal Connectors

    1.2.9 Internal connectors Intel Z87 Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1-6 [yellow]) ® These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s signal cables. If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the Intel Rapid Storage Technology through the onboard Intel ®...
  • Page 55 This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect the S/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis. The S/PDIF module is purchased separately. ASUS Z87-PRO (V EDITION) 1-39...
  • Page 56 USB 3.0 connector (20-1 pin USB3_12) This connector allows you to connect a USB 3.0 module for additional USB 3.0 front or rear panel ports. With an installed USB 3.0 module, you can enjoy all the benefits of USB 3.0 including faster data transfer speeds of up to 5Gbps, faster charging time for USB-chargeable devices, optimized power efficiency, and backward compatibility with USB 2.0.
  • Page 57 DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! You can connect the front panel USB cable to the ASUS Q-Connector (USB, dark brown) first, and then install the Q-Connector (USB) to the USB connector onboard if your chassis supports front panel USB ports.
  • Page 58 Ensure that the CPU fan is securely installed to the CPU fan connector. • The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power. • The CPU_FAN connector and CHA_FAN connectors support the ASUS FAN Xpert 2 feature. Chapter 1: Product introduction 1-42...
  • Page 59 • If you want to connect a high-definition or an AC’97 front panel audio module to this connector, set the Front Panel Type item in the BIOS setup to [HD] or [AC97]. ASUS Z87-PRO (V EDITION) 1-43...
  • Page 60 1000W power or above to ensure the system stability. • If you are uncertain about the minimum power supply requirement for your system, refer to the Recommended Power Supply Wattage Calculator at http://support.asus. com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details. Chapter 1: Product introduction...

  • Page 61: System Panel Connector

    Pressing the power switch for more than four seconds while the system is ON turns the system OFF. • Reset button (2-pin RESET) This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power. ASUS Z87-PRO (V EDITION) 1-45...
  • Page 62 TPM connector (20-1 pin TPM) This connector supports a Trusted Platform Module (TPM) system, which securely store keys, digital certificates, passwords and data. A TPM system also helps enhance network security, protect digital identities, and ensures platform integrity. Direct Connector (2-pin DRCT) This connector is for the chassis-mounted button that supports the DirectKey function.

  • Page 63: Chapter 2: Basic Installation

    The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps are the same for all models. Install the ASUS I/O Shield to the chassis rear I/O panel. Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to the chassis’...
  • Page 64 Place nine screws into the holes indicated by circles to secure the motherboard to the chassis. DO NOT overtighten the screws! Doing so can damage the motherboard. Chapter 2: Basic installation...

  • Page 65: Cpu Installation

    2.1.2 CPU installation Ensure that you install the correct CPU designed for LGA1150 socket only. DO NOT install a CPU designed for LGA155 and LGA1156 socket on the LGA1150 socket. ASUS Z87-PRO (V EDITION)

  • Page 66: Cpu Heatsink And Fan Assembly Installation

    2.1.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan, if necessary. To install the CPU heatsink and fan assembly Chapter 2: Basic installation...
  • Page 67 To uninstall the CPU heatsink and fan assembly ASUS Z87-PRO (V EDITION)

  • Page 68: Dimm Installation

    2.1.4 DIMM installation To remove a DIMM Chapter 2: Basic installation...

  • Page 69: Atx Power Connection

    2.1.5 ATX Power connection ASUS Z87-PRO (V EDITION)

  • Page 70: Sata Device Connection

    2.1.6 SATA device connection Chapter 2: Basic installation...

  • Page 71: Front I/O Connectors

    2.1.7 Front I/O Connectors To install ASUS Q-Connector To install USB 2.0 connector To install front panel audio connector AAFP USB 2.0 To install USB 3.0 connector USB 3.0 ASUS Z87-PRO (V EDITION)

  • Page 72: Expansion Card Installation

    2.1.8 Expansion Card installation To install PCIe x16 cards To install PCIe x1 cards Chapter 2: Basic installation 2-10...

  • Page 73: Bios Update Utility

    Press the BIOS Flashback button for three seconds until a flashing light appears, which indicates that the BIOS Flashback function is enabled. Wait until the light goes out, indicating that the BIOS updating process is completed. ASUS Z87-PRO (V EDITION) 2-11...
  • Page 74 BIOS file name error, or incompatible BIOS file format. If this happens, restart the syetem. BIOS updating poses some risks. If the BIOS program is damaged during the updating process and the system fails to reboot, please contact your local ASUS Service Center for assistance Chapter 2: Basic installation...

  • Page 75: Motherboard Rear And Audio Connections

    Optical S/PDIF Out port DisplayPort VGA port DVI port Intel LAN (RJ-45) port* Intel USB 3.0 ports, support ASUS ® ® USB 3.0 Boost. (Bottom port supports USB BIOS Flashback and USB Charger+) ASMedia USB 3.0 ports support Audio I/O ports** ASUS USB 3.0 Boost...
  • Page 76 • The plugged USB 3.0 device may run on xHCI or EHCI mode, depending on the operating system’s setting. • USB 3.0 devices can only be used as data storage only. • We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster and better performance for your USB 3.0 devices.

  • Page 77: Audio I/O Connections

    2.3.2 Audio I/O connections Audio I/O ports Connect to Headphone and Mic Connect to Stereo Speakers Connect to 2.1 channel Speakers ASUS Z87-PRO (V EDITION) 2-15...
  • Page 78 Connect to 4.1 channel Speakers Connect to 5.1 channel Speakers Chapter 2: Basic installation 2-16...

  • Page 79: Starting Up For The First Time

    If you do not see anything within 30 seconds from the time you turned on the power, the system may have failed a power-on test. Check the jumper settings and connections or call your retailer for assistance. ASUS Z87-PRO (V EDITION) 2-17...

  • Page 80: Turning Off The Computer

    BIOS Beep Description One short beep VGA detected Quick boot set to disabled No keyboard detected One continuous beep followed by two No memory detected short beeps then a pause (repeated) One continuous beep followed by three No VGA detected short beeps One continuous beep followed by four Hardware component failure...

  • Page 81: Chapter 3: Bios Setup

    BIOS setup Knowing BIOS The new ASUS UEFI BIOS is a Unified Extensible Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond the traditional keyboard- only BIOS controls to enable a more flexible and convenient mouse input. You can easily navigate the new UEFI BIOS with the same smoothness as your operating system.

  • Page 82: Bios Setup Program

    BIOS setup program Use the BIOS Setup to update the BIOS or configure its parameters. The BIOS screen include navigation keys and brief onscreen help to guide you in using the BIOS Setup program. Entering BIOS at startup To enter BIOS Setup at startup: •...

  • Page 83: Ez Mode

    • The boot device options vary depending on the devices you installed to the system. • The Boot Menu(F8) button is available only when the boot device is installed to the system. ASUS Z87-PRO (V EDITION)

  • Page 84: Advanced Mode

    3.2.2 Advanced Mode The Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the following sections for the detailed configurations. To access the Advanced Mode, click Exit, then select Advanced Mode or press F7 hotkey. Menu bar General help Back button...

  • Page 85: Menu Items

    This button allows you to enter notes of the activities that you have done in BIOS. • The Quick Note function does not support the following keyboard functions: delete, cut, copy and paste. • You can only use the alphanumeric characters to enter your notes. ASUS Z87-PRO (V EDITION)

  • Page 86: My Favorites

    Last Modified button This button shows the items that you last modified and saved in BIOS Setup. My Favorites MyFavorites is your personal space where you can easily save and access your favorite BIOS items. Adding items to My Favorites To add frequently-used BIOS items to My Favorites: Use the arrow keys to select an item that you want to add.

  • Page 87: Main Menu

    The Administrator or User Password items on top of the screen show the default [Not • The Administrator or User Password items on top of the screen show the default Installed]. After you set a password, these items show [Installed]. ASUS Z87-PRO (V EDITION)

  • Page 88: Administrator Password

    Administrator Password If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected fields in the BIOS setup program. To set an administrator password: Select the Administrator Password item and press <Enter>.

  • Page 89: Ai Tweaker Menu

    Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field values can cause the system to malfunction. The configuration options for this section vary depending on the CPU and DIMM model you installed on the motherboard. Scroll down to display other BIOS items. ASUS Z87-PRO (V EDITION)
  • Page 90 The following item appears only when you set the Ai Overclocking Tuner to [X.M.P.]. eXtreme Memory Profile Allows you to select the X.M.P. mode supported by your memory module. Configuration options: [Profile #1] [Profile #2] ASUS MultiCore Enhancement [Enabled] Default set to [Enabled] for maximum performance under XMP/Manual/ [Enabled] User-defined memory frequency mode.
  • Page 91 [Manual] Allows you to set a value for an optimal CPU Grapics Ratio. Use the <+> or <-> keys to adjust the CPU graphics ratio. The minimum value depends on the installed CPU. ASUS Z87-PRO (V EDITION) 3-11...

  • Page 92: Dram Timing Control

    OC Tuner [As Is] OC Tuner automatically overclocks the frequency and voltage of CPU and DRAM for enhancing the system performance and accelerates the iGPU performance to the extreme according to the integrated graphics loading. Configuration options: [As Is] [Ratio First] [BCLK First] EPU Power Saving Mode [Disabled] Allows you to enable or disable the EPU power saving function.
  • Page 93 Configuration options: [Auto] [1] - [15] DRAM IO-L (CHA_R1D0 [Auto] Configuration options: [Auto] [1] - [15] DRAM IO-L (CHA_R1D1 [Auto] Configuration options: [Auto] [1] - [15] DRAM IO-L (CHB_R0D0 [Auto] Configuration options: [Auto] [1] - [15] ASUS Z87-PRO (V EDITION) 3-13...
  • Page 94 DRAM IO-L (CHB_R0D1) [Auto] Configuration options: [Auto] [1] - [15] DRAM IO-L (CHB_R1D0 [Auto] Configuration options: [Auto] [1] - [15] DRAM IO-L (CHB_R1D1 [Auto] Configuration options: [Auto] [1] - [15] Third Timings tRDRD [Auto] Configuration options: [Auto] [1] – [7] tRDRD_dr [Auto] Configuration options: [Auto] [1] –...
  • Page 95 Configuration options: [Enable Both DIMMS] [Disable DIMM0] [Disable DIMM1] [Disable Both DIMMS] Scrambler Setting [Optimized ...] Allows you to set the optimized scrambler setting for stability. Configuration options: [Optimized (ASUS] [Default (MRC)] DIGI+ Power Control CPU Load-Line Calibration [Auto] Load-line is defined by Intel VRM specification and affects CPU power voltage.
  • Page 96 The following items appear only when you set the CPU Voltage Frequency to [Auto]. VRM Spread Spectrum [Disabled] Enable the VRM Spread Spectrum to enhance system stability. Configuration options: [Disabled] [Enabled] Active Frequency Mode [Disabled] Enable the Active Frequency Mode for an enhanced power saving condition.

  • Page 97: Cpu Power Management

    DRAM Power Phase Control [Auto] [Auto] Allows you to set the Auto mode. [Optimized] Allows you to set the ASUS optimized phase tuning profile. [Extreme] Allows you to set the full phase mode. CPU Power Management The subitems in this menu allow you to set the CPU ratio and their features.
  • Page 98 Turbo Mode Parameters Long Duration Package Power Limit [Auto] Allows you to limit the Turbo Ratio’s time duration that exceeds the TDP (Thermal Design Power) for maximum performance. Use the <+> or <-> keys to adjust the value. The values range from 1W t0 4096W. Package Power Time Window [Auto] Also known as Power Limit 1, and allows you to maintain the time window for Turbo Ratio over TDP (Thermal Design Power).
  • Page 99 Lower value provides sufficient overclocking tolerance to enlarge the overclocking potential. Higher value provides better power-saving condition.Use <+> or <-> key to adjust the value. The values range from 0A to 30A at 1Amp increment. ASUS Z87-PRO (V EDITION) 3-19...
  • Page 100 Extreme OV [Disabled] Default set to DIsabled and help to protect CPU not been burned by Over Voltage. When set to Enabled, you might choose high level voltage to overclock, but not guaranteed CPU life. Configuration options: [Disabled] [Enabled] CPU Core Voltage [Auto] Allows you to configure the amount of voltage fed to the cores of the processor.
  • Page 101 PCIe controller and power control unit. Increase the amount of voltage when increasing DRAM frequency. Use the <+> or <-> keys to adjust the value. The values range from 0.001V to 0.999V with a 0.001V interval. ASUS Z87-PRO (V EDITION) 3-21...
  • Page 102 CPU Analog I/O Voltage Offset Mode Sign [+] To offset the voltage by a positive value. [–] To offset the voltage by a negative value. CPU Analog I/O Voltage Offset [Auto] Allows you to configure the amount of voltage fed to the analog portion of the I��O on the processor.
  • Page 103 BCLK DN is equal to the falling edge of the BCLK DP. You can use the <+> or <-> keys to adjust the value. The values range from 0.1V to 1.9V with a 0.10625V interval. CPU Spread Spectrum [Auto] [Auto] Automatic configuration. [Disabled] Enhances the BCLK overclocking ability. [Enabled] Sets to [Enabled] for EMI control. ASUS Z87-PRO (V EDITION) 3-23...

  • Page 104: Advanced Menu

    Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. Chapter 3: BIOS setup 3-24...

  • Page 105: Cpu Configuration

    This Item apears only if you installed a CPU that supports the Intel Hyper-threading technology. Active Processor Cores [All] Allows you to choose the number of CPU cores to activate in each processor package. Configuration options: [All] [1] [2] [3] ASUS Z87-PRO (V EDITION) 3-25...
  • Page 106 Limit CPUID Maximum [Disabled] [Enabled] Allows legacy operating systems to boot even without support for CPUs with extended CPUID functions. [Disabled] Disables this function. Execute Disable Bit [Enabled] [Enabled] Enables the No-Execution Page Protection Technology. [Disabled] Forces the XD feature flag to always return to zero (0). Intel Virtualization Technology [Disabled] [Enabled] Allows a hardware platform to run multiple operating systems separately...
  • Page 107 Allows you to set the duration of C7 latency for C7 state. Configuration options: [Short] [Long] Package C State Support [Auto] Allows you to set the a C-state according to the following configuration options: [Auto] [Enabled] [C0/C1] [C2] [C3] [C6] [CPU C7] [CPU C7s] ASUS Z87-PRO (V EDITION) 3-27...

  • Page 108: Pch Configuration

    3.6.2 PCH Configuration PCI Express Configuration Allows you to configure the PCI Express slots. DMI Link ASPM Control [Auto] Allows you to control the ASPM (Active State Power Management) on both Northbridge side and Southbridge side of the DMI Link. Configuration options: [Disabled] [Enabled] [Auto] ASPM Support [Disabled] Allows you to set the ASPM level.

  • Page 109: Sata Configuration

    While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Not Present if no SATA device is installed to the corresponding SATA port. Scroll down to display the other BIOS items. ASUS Z87-PRO (V EDITION) 3-29...
  • Page 110 SATA Mode Selection [AHCI] Allows you to set the SATA configuration. [Disabled] Disables the SATA function. [IDE] Set to [IDE Mode] when you want to use the Serial ATA hard disk drives as Parallel ATA physical storage devices. [AHCI] Set to [AHCI Mode] when you want the SATA hard disk drives to use the AHCI (Advanced Host Controller Interface).

  • Page 111: System Agent Configuration

    [288M] [320M] [352M] [384M] [416M] [448M] [480M] [512M] [1024M] Render Standby [Auto] Allows you to enable the Intel Graphics Render Standby support to reduce the iGPU power use when idle. Configuration options: [Auto] [Disabled] [Enabled] ASUS Z87-PRO (V EDITION) 3-31...

  • Page 112: Dmi Configuration

    iGPU Multi-Monitor [Disabled] Allows you to enable the iGPU Multi-Monitor. The iGPU shared system memory size will be fixed at 64MB. Configuration options: [Disabled] [Enabled] DMI Configuration Allows you to control various DMI (Desktop Management Interface) functions. DMI Gen 2 [Auto] Allows you to enable or disable DMI Gen 2.

  • Page 113: Usb Configuration

    Configuration options: [Auto] [Floppy] [Forced FDD] [Hard Disk] [CD-ROM] USB Single Port Control Allows you to enable or disable the individual USB port. Refer to section 1.2.2 Motherboard layout for the location of the USB ports. ASUS Z87-PRO (V EDITION) 3-33...

  • Page 114: Platform Misc Configuration

    3.6.6 Platform Misc Configuration The items in this menu allow you to configure the platform-related features. PCI Express Native Power Management [Disabled] Allows you to enhance the power saving feature of PCI Express and perform ASPM operations in the operating system. Configuration options: [Disabled] [Enabled] The following item appears only when you set the PCI Express Native Power Management to [Enabled].

  • Page 115: Onboard Devices Configuration

    Sets the front panel audio connector (AAFP) mode to high definition audio. [AC97] Sets the front panel audio connector (AAFP) mode to legacy AC’97 SPDIF Out Type [SPDIF] [SPDIF] Sets to an SPDIF audio output. [HDMI] Sets to an HDMI audio output. ASUS Z87-PRO (V EDITION) 3-35...
  • Page 116 ASM1061 Storage Controller (SATA6G_E12) [Enabled] Allows you to select the ASM1061 storage controller operating mode. [Disabled] Disables the ASM1061 storage controller. [Enabled] Enables the ASM1061 storage controller. Hot-plug [Enabled] Allows you to set the Hot Plug support. Configuration options: [Disabled] [Enabled] PCI Express X16_3 slot (black) bandwidth [Auto]* [Auto] PCIeX16_3 slot runs at X1 mode for system resource optimization...

  • Page 117: Apm

    /LAN device or other installed PCIE LAN devices. ® Power On By RTC [Disabled] [Disabled] Disables RTC to generate a wake event. When set to [Enabled], the items RTC Alarm Date (Days) and Hour/ [Enabled] Minute/Second will become user-configurable with set values. ASUS Z87-PRO (V EDITION) 3-37...

  • Page 118: Network Stack

    3.6.9 Network Stack Network Stack [Disable] This item allows user to disable or enable the UEFI network stack. Configuration options: [Disable] [Enable] The following item appears only when you set the Network Stack to [Enabled]. Ipv4/Ipv6 PXE Support [Enabled] Allows you to enable or disable the Ipv4/Ipv6 PXE boot option. Configuration options: [Disabled] [Enabled] Chapter 3: BIOS setup 3-38...

  • Page 119: Monitor Menu

    CPU core 0-3 Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators. Select [Ignore] if you do not want to detect this item. ASUS Z87-PRO (V EDITION) 3-39...
  • Page 120 CPU Q-Fan Control [Auto] Allows you to set the CPU Q-Fan operating mode. [Auto] Enables the CPU Q-Fan control feature in PWM mode for 4-pin CPU fan. [Advance Mode] Detects the type of CPU fan installed and automatically switches the mode control.
  • Page 121 60% to 100%. When the chassis temperature is under 40ºC, the chassis fan will operate at the minimum duty cycle. Anti Surge Support [Enabled] This item allows you to enable or disable the Anti Surge function. Configuration options: [Disabled] [Enabled] ASUS Z87-PRO (V EDITION) 3-41...

  • Page 122: Boot Menu

    Boot menu The Boot menu items allow you to change the system boot options. Boot Configuration Fast Boot [Enabled] [Disabled] Allows your system to go back to its normal boot speed. [Enabled] Allows your system to accelerate the boot speed. The following items appear only when you set the Fast Boot to [Enabled].
  • Page 123 Disables the DirectKey button. The system will only power on or off when you press the DirectKey button. [Go to BIOS Allows the system to power on and go to the BIOS Setup directly when Setup] you press the DirectKey button. ASUS Z87-PRO (V EDITION) 3-43...
  • Page 124 Boot Logo Display [Enabled] [Enabled] Enables the full screen boot logo display during POST. [Disabled] Disables the full screen boot logo display during POST. Boot Logo Size Control [Auto] [Auto] Automatically adjusts for Windows requirements. ® [Full Screen] Maximizes the boot logo size. Post Delay Time [3 sec] This item appears only when you set the Full Screen Logo item to [Enabled].

  • Page 125: Secure Boot

    UEFI mode, or other Microsoft Secure Boot non compliant OS. ® Microsoft Secure Boot only supports Windows UEFI mode. ® ® The following item appears only when you set the OS Type to [Windows UEFI mode]. ASUS Z87-PRO (V EDITION) 3-45...
  • Page 126 Key Management This item appears only when you set OS Type to [Windows UEFI Mode]. It allows you to manage the Secure Boot keys. Clear Secure Boot keys This item appears only when you load the default Secure Boot keys. This item allows you to clear all default Secure Boot keys.
  • Page 127 Append dbx from File Allows you to load the additional dbx from a storage device so that more db’s images cannot be loaded. The dbx file must be formatted as a UEFI variable structure with time-based authenticated variable. ASUS Z87-PRO (V EDITION) 3-47...

  • Page 128: Tools Menu

    3.9.1 ASUS EZ Flash 2 Utility Allows you to run ASUS EZ Flash 2. When you press <Enter>, a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press <Enter> to confirm your choice.

  • Page 129: Asus Spd Information

    We recommend that you update the BIOS file only coming from the same memory�� We recommend that you update the BIOS file only coming from the same memory�� CPU configuration and BIOS version. 3.9.3 ASUS SPD Information Allows you to view the DRAM SPD information. ASUS Z87-PRO (V EDITION) 3-49...

  • Page 130: Exit Menu

    This option allows you to exit the Setup program without saving your changes. When you select this option or if you press <Esc>, a confirmation window appears. Select Yes to discard changes and exit. ASUS EZ Mode This option allows you to enter the EZ Mode screen. Launch EFI Shell from filesystem device This option allows you to attempt to launch the EFI Shell application (shellx64.efi) from one of...

  • Page 131: Updating Bios

    Inappropriate BIOS updating may result in the system’s failure to boot. Carefully follow the instructions of this chapter to update your BIOS if necessary. Visit the ASUS website at www.asus.com to download the latest BIOS file for this motherboard. The following utilities allow you to manage and update the motherboard BIOS setup program.

  • Page 132: Asus Ez Flash 2

    3.11.2 ASUS EZ Flash 2 ASUS EZ Flash 2 allows you to update the BIOS without having to use a bootable floppy disk or an OS-based utility. Before you start using this utility, download the latest BIOS from the ASUS website at www.asus.com.

  • Page 133: Asus Crashfree Bios 3

    The BIOS file in the motherboard support DVD may be older than the BIOS file published on the ASUS official website. If you want to use the newer BIOS file, download the file at http://support.asus.com and save it to a USB flash drive.

  • Page 134: Asus Bios Updater

    3.11.4 ASUS BIOS Updater The ASUS BIOS Updater allows you to update the BIOS in DOS environment. This utility also allows you to copy the current BIOS file that you can use as a backup when the BIOS fails or gets corrupted during the updating process.
  • Page 135 Press <Tab> to switch between screen fields and use the <Up��Down��Home��End> keys to select the BIOS file and press <Enter>. BIOS Updater checks the selected BIOS file and prompts you to confirm BIOS update. Are you sure to update BIOS? ASUS Z87-PRO (V EDITION) 3-55...
  • Page 136 Select Yes and press <Enter>. When BIOS update is done, press <ESC> to exit BIOS Updater. Restart your computer. DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure! • For BIOS Updater version 1.04 or later, the utility automatically exits to the DOS For BIOS Updater version 1.04 or later, the utility automatically exits to the DOS prompt after updating BIOS.

  • Page 137: Chapter 4: Software Support

    Support DVD information The contents of the support DVD are subject to change at any time without notice. Visit the ASUS website at www.asus.com for updates. 4.2.1 Running the support DVD Place the support DVD into the optical drive. The DVD automatically displays the Drivers menu if Autorun is enabled in your computer.

  • Page 138: Obtaining The Software Manuals

    Reader from the Utilities tab before opening the files. Acrobat ® To read about your motherboard’s utility guide: Click Manual tab > ASUS Motherboard Utility Guide. From the Manual folder, open the folder of the software manual that you wish to read.

  • Page 139: Software Information

    4.3.1 AI Suite 3 AI Suite 3 is an all-in-one interface that integrates several ASUS utilities and allows you to launch and operate these utilities simultaneously. Installing AI Suite 3 To install AI Suite 3 on your computer: Place the support DVD to the optical drive.

  • Page 140: Dual Intelligent Processors 4

    • Refer to the software manual in the support DVD or visit the ASUS website at Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration.

  • Page 141: Cpu Frequency

    ASUS TPU allows you to manually adjust the CPU frequency, CPU Cache and Core frequencies, DRAM frequency, and related voltages for an enhanced system stability and boost performance. Refer to the CPU documentation before adjusting CPU voltage settings. Setting a high voltage may damage the CPU permanently, and setting a low voltage may lead to an unstable system.

  • Page 142: Gpu Boost

    Voltage Drag adjust CPU Core Voltage offset Drag adjust CPU Cache Voltage offset Click to apply the adjustments Click to undo the adjustments Drag the slider to adjust Click to save the Click to load DRAM, CPU Analog I/O, Drag the slider to adjust CPU System adjustment into a the saved PCH, and CPU Input...

  • Page 143: Using Epu

    • Configured Max CPU Power may decrease the total power delivery to the CPU and affects the CPU performance under system heavy load. To restore your system to its default settings, reboot your computer. ASUS Z87-PRO (V EDITION)

  • Page 144: Digi+ Power Control

    • DRAM Power Phase Control Select Extreme for full phase mode to increase system performance or select Optimized for ASUS optimized phase tuning profile to increase DRAM power efficiency. • DRAM Current Capability A higher value brings a wider total power range and extends the overclocking frequency range simultaneously.

  • Page 145: Fan Xpert 2

    Click and drag Click to undo the sliders to the changes adjust the fan’s responsiveness Click to apply the changes Click to go back to the previous Click to switch between the screen CPU and chassis fan screens ASUS Z87-PRO (V EDITION)
  • Page 146 RPM Mode RPM Mode allows you to set the fan speed when the CPU temperature is below 75 Click and drag to adjust the fan’s speed Click to undo the changes Click to apply the changes Click to go back to the previous Click to switch between the screen...

  • Page 147: Usb 3.0 Boost

    • Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. • Use the USB 3.0 devices for high performance. The data transfer speed varies with Use the USB 3.0 devices for high performance.

  • Page 148: Usb Bios Flashback Wizard

    4.3.4 USB BIOS Flashback Wizard USB BIOS Flashback Wizard allows you to check and save the latest BIOS version to a USB storage device. Use this utility to quickly check for the latest available BIOS and set the BIOS download schedule. USB BIOS Flashback Wizard screen Set a schedule for Current BIOS...
  • Page 149 After the utility detects a new BIOS, click from the Save to: field, select the USB flash drive, then click Download. After the download is complete, click OK. ASUS Z87-PRO (V EDITION) 4-13...

  • Page 150: Ai Charger

    4.3.5 Ai Charger+ Ai Charger+ allows you to fast-charge your portable BC 1.1* mobile devices on your computer’s USB port three times faster than the standard USB devices**. Launching Ai Charger+ on the top edge of the screen, then click Ai Charger+ on To launch Ai Charger+, click the AI Suite 3 main menu bar.

  • Page 151: Ez Update

    AI Suite 3 main menu bar. EZ Update screen Click to automatically update your motherboard’s driver, software and firmware Click to select a Click to update Click to search and boot logo the BIOS select the BIOS file ASUS Z87-PRO (V EDITION) 4-15...

  • Page 152: Network Icontrol

    4.3.7 Network iControl Network iControl is a one-stop setup network control center that allows you to manage your network bandwidth and set the bandwidth priority for your running programs. Launching Network iControl on the top edge of the screen, then click Network To launch Network iControl, click iControl on the AI Suite 3 main menu bar.

  • Page 153: Usb Charger

    2.3.1 Rear I/O connection of your user manual for more details. • The USB Charger+ does not support USB hubs and USB extension cables, and generic USB cables. • The USB Charger+ may not recognize some ASUS devices due to a special design. ASUS Z87-PRO (V EDITION) 4-17...

  • Page 154: System Information

    4.3.9 System Information This utility allows you get the detailed information of the motherboard, CPU, and memory settings. Launching the System Information on the top edge of the screen, then click System To launch System Information, click Information on the AI Suite 3 main menu bar. Viewing the motherboard information From the System Information screen, click MB tab to view the motherboard’s information.

  • Page 155: Audio Configurations

    ® Realtek HD Audio Manager icon on the taskbar. Double-click on ® the icon to display the Realtek HD Audio Manager. ® Realtek HD Audio Manager ® ASUS Z87-PRO (V EDITION) 4-19...
  • Page 156 Realtek HD Audio Manager with DTS UltraPC II for Windows ® ® Windows ® Advanced Configuration option tabs (vary with the audio devices connected) settings Set default device Control settings panel Analog and digital connector status This version of Realtek HD Audio Manager supports Intel 8 Series motherboards and other ®...
  • Page 157 Analog and digital connector status • Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. • To play Blu-Ray™ disc, make sure to use an HDCP compliant monitor.
  • Page 158 Chapter 4: Software support 4-22...

  • Page 159: Chapter 5: Raid Support

    With the RAID 10 configuration you get all the benefits of both RAID 0 and RAID 1 configurations. Use four new hard disk drives or use an existing drive and three new drives for this setup. ASUS Z87-PRO (V EDITION)

  • Page 160: Installing Serial Ata Hard Disks

    5.1.2 Installing Serial ATA hard disks The motherboard supports Serial ATA hard disk drives. For optimal performance, install identical drives of the same model and capacity when creating a disk array. To install the SATA hard disks for a RAID configuration: Install the SATA hard disks into the drive bays.

  • Page 161: Intel ® Rapid Storage Technology Option Rom Utility

    The RAID BIOS setup screens shown in this section are for reference only and may not exactly match the items on your screen. The utility supports maximum four hard disk drives for RAID configuration. ASUS Z87-PRO (V EDITION)
  • Page 162 Creating a RAID set To create a RAID set: From the utility main menu, select 1. Create RAID Volume and press <Enter>. The following screen appears: Intel(R) Rapid Storage Technology - Option ROM - v10.5.1.1070 Copyright(C) 2003-10 Intel Corporation. All Rights Reserved. [ CREATE VOLUME MENU ] Name: Volume0...
  • Page 163 WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST. Are you sure you want to create this volume? (Y/N): Press <Y> to create the RAID volume and return to the main menu, or <N> to go back to the CREATE VOLUME menu. ASUS Z87-PRO (V EDITION)
  • Page 164 Deleting a RAID set Be cautious when deleting a RAID set. You will lose all data on the hard disk drives when you delete a RAID set. To delete a RAID set: From the utility main menu, select 2. Delete RAID Volume and press <Enter>. The following screen appears: [ DELETE VOLUME MENU ] Name...

  • Page 165: Creating A Raid Driver Disk

    When the Make Disk menu appears, press <1> to create a RAID driver disk. Insert a formatted floppy disk into the USB floppy disk drive, then press <Enter>. Follow the succeeding screen instructions to complete the process. ASUS Z87-PRO (V EDITION)

  • Page 166: Creating A Raid Driver Disk In Windows

    5.2.2 Creating a RAID driver disk in Windows ® To create a RAID driver disk in Windows ® Start Windows ® Plug the USB floppy disk drive and insert a floppy disk. Place the motherboard support DVD into the optical drive. Go to the Intel AHCI/RAID Driver menu then click Intel AHCI/RAID Driver path to open the RAID driver folder.

  • Page 167: Appendices

    The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. ASUS Z87-PRO (V EDITION)

  • Page 168: Canadian Department Of Communications Statement

    IC: Canadian Compliance Statement Complies with the Canadian ICES-003 Class B specifications. This device complies with RSS 210 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment regulations. This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

  • Page 169: Rf Equipment Notices

    ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials.
  • Page 170 Bluetooth Industry Canada Statement This Class B device meets all requirements of the Canadian interference-causing equipment regulations. Cet appareil numérique de la Class B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. NCC: Taiwan Wireless Statement Japan RF Equipment Statement KC (RF Equipment) Appendices...

  • Page 171: Asus Contact Information

    +1-812-282-3777 +1-510-608-4555 Web site usa.asus.com Technical Support Telephone +1-812-282-2787 Support fax +1-812-284-0883 Online support support.asus.com ASUS COMPUTER GmbH (Germany and Austria) Address Harkort Str. 21-23, D-40880 Ratingen, Germany +49-2102-959911 Web site www.asus.de Online contact www.asus.de/sales Technical Support Telephone +49-1805-010923* Support Fax...
  • Page 172 Appendices...

Table of Contents