Clearing The Hard Drive - Motorola DCX3510-M Installation Manual

Installation

Clearing the Hard Drive

On a previously-used cable terminal, delete all recorded programs from the hard drive
before installing it at a new subscriber location. This prevents the new subscriber from
viewing programming they may not have purchased or may not want to see.
To prevent subscribers from accidentally deleting all of their recorded programs, a
specific set of keystrokes is required to clear the hard drive. The DCX3510-M does not
need to be connected to a television in order to clear the hard drive using this process.
To clear the hard drive:
1. Start the diagnostics as described in the
displayed on the front-panel display.
2. Using a remote control, within five seconds, press REPLAY, MY DVR three times,
and LIVE TV. (On some remote controls, the MY DVR key may be labeled LIST.)
3. If you correctly enter this key sequence in five seconds or less, the hard drive is
cleared and the front-panel displays Clr.
4. If Clr is not displayed, re-enter the key sequence in step 2.
5. If Clr is displayed, press any other key on the remote control to reset the terminal,
turn it off, and complete the clearing process.
High-Definition DVR DCX3510-M • Installation Manual
365-095-17066-x.1
Using the Diagnostics section; d 01 is
B
14