JVC TH-A25 Instructions Manual page 13

Audio component connection
Connect other components to the center unit with the audio
cord.
Use the cord supplied with the other component or purchase
one at an electric appliance store.
A
Optical digital cord (not supplied)
B
Audio cord (not supplied)
DIGITAL IN
OPTICAL
Center unit
DIGITAL IN
OPTICAL
AUDIO IN
L
R
REAR
AUX
AUDIO IN
AUX
Notes:
• Keep the power cord away from the connecting cords and the antenna. The power cord may cause noise or screen interference.
• Connecting to a TV through a VCR, or to a TV with a built-in VCR, may cause distortion of picture.
Before connecting an optical
digital cord, unplug the
protective plug.
RGB
COMPOSITE
B
Now, you can plug the power cord of the center unit into the AC outlet.
Illustrations of the input/output terminals below are typical
examples.
When you connect other components, refer also to their
manuals since the terminal name actually printed on the rear
vary among the components.
If you connect a sound-enhancing device such as a
graphic equalizer between the source component and
the center unit, the sound output through this system
may be distorted.
DIGITAL
OPTICAL OUT
A
AUDIO
LEFT
RIGHT
OUT
DBS Tuner
MD Recorder
DBS Tuner
MD Recorder
Cassette Deck
VCR
TV
9