Cutting Height Adjuster; Seat Adjustment Lever; Fuel Shut Off Valve - Husqvarna MZ52LE Operator's Manual

Cutting Height Adjuster

The desired cutting height is set with the height pin.
The cutting height pedal releases the deck lift to place
the deck and the selected height.
For transport, push the lift pedal fully forward until the
deck lift latches in the transport (highest) position.

Seat Adjustment Lever

The seat can be adjusted lengthways. When making
adjustments, the lever under the front edge of the
seat is moved to the left (as seen by the driver in the
seat), after which the seat can be moved backward or
forward.

Fuel Shut Off Valve

The fuel shut off valve is centered behind the rear
of the seat. The valve is off when the handle tab is
turned perpendicular to the fuel line.
22
CONTROLS
1. Release pedal
2. Height pin
Cut height selection pedals
Lengthways adjustment
Fuel shut off valve in the CLOSED position.
2
1
8058-223
8011-441
8065-010