Contents Contents Machine Overview General Safety Information Getting Started How To Use Looking After Your Machine FAQs Other Information Guarantee...
11. Do not use this carpet washer if it has been dropped, damaged, left outdoors or dropped into water. Do not use this carpet washer with a damaged cord or plug. If the supply cord is damaged return the carpet washer to a Vax authorised Service Agent.
Clip in the last wrap of Ensure locking tabs the hose and wash tool are horizontal. as shown. Assembling your tool caddy and hose (Optional) Wrap solution tube around holder for storage. vax.co.uk...
This will prevent wood finishes from staining your carpet. Pin up furniture skirts and curtains. IMPORTANT: Only use Vax carpet cleaning solution. Using other solutions may cause excess foaming. Excessive foam will prevent the machine from working effectively. Using other solutions will invalidate the guarantee.
Page 7
For best results apply the machine is reclined, the release solution. solution on the forward brushbar will rotate. In stroke and release the an upright position, the trigger to recover solution brushbar will not rotate. on the backward stroke. vax.co.uk...
Turn clockwise to secure. Using the wash tool Do not saturate your upholstery. The clean water tank will need to be filled with Vax carpet cleaning solution and water before use. Align inserts and push in. Turn clockwise to secure.
(24 hours). Removing blockages from the brushbar WARNING: To reduce the risk of electric shock, turn the machine off and unplug from electrical socket before performing maintenance/troubleshooting checks. Threads caught in the brushbar can be cut. vax.co.uk...
Looking After Your Machine Replacing the belt WARNING: Do not open the motor cover. Use a crosshead Remove damaged/broken Replace new belt on to screwdriver to remove belt off the spindles. spindles and secure the two (2) screws. belt cover. Storage • Empty and rinse out clean and dirty water tanks and leave to air dry before replacing.
If the hose or tools are blocked, switch off the carpet washer and remove the blockage(s) before re-starting your machine. Important: Cleaning filters maintains cleaning performance. Vax recommends that your filters should be checked and cleaned periodically. If your filters are washable make sure that they are completely dry before inserting them back into the vacuum cleaner. Important: The motor is equipped with a thermal cut-out.
Any queries or concerns about using your Vax, simply visit; vax.co.uk/support – vaxireland.ie or call the Vax Careline. Calls are charged at the UK local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling.
9:00am-17:00pm we’re here if you need us Instead of taking me back to the shop, simply visit: vax.co.uk/support or call (UK) 0844 412 8455 (ROI) 1-800 928 308 Let us know what you think @VaxUK Designed in the UK vax.co.uk...