Download Print this page

Invacare 7714P Installation And Operating Instructions

Floor base and fixed trapeze

Advertisement

Quick Links

Floor Base and Fixed Trapeze
Assembly, Installation and Operating Instructions
Model Nos. 7714P and G7740P
NOTE: Check ALL parts for shipping damage. In case of shipping damage, DO NOT use. Contact Dealer/Carrier for further instructions.
To ensure the safe and proper installation of the Floor Base and Fixed Trapeze, these instructions MUST be followed:
DO NOT install this equipment without first reading and understanding this instruction sheet. If
you are unable to understand the warnings, cautions and instructions, contact a healthcare
professional, dealer or technical personnel if applicable, before attempting to install this
equipment - otherwise, injury or damage may occur.
The Fixed Trapeze MUST ONLY be installed onto beds with metal framed headboa
The Fixed Trapeze used in conjunction with a bed, can assist an individual weighing up to 250 lbs.
(114 kg.). The Fixed Trapeze is designed to provide support, increase stability and assist the user
when repositioning himself/herself in bed.
Use the trapeze as an assistive device only. The trapeze is not designed to support the total body
weight of an individual or to be used as an assist device when transferring into or out of a bed.
After ANY adjustments, repair or service and BEFORE use, make sure that all attaching
component parts are secure.
DO NOT INSTALL OR ADJUST TRAPEZE OF AN OCCUPIED BED.
DO NOT attach swivel trapezes to the floor base. This may cause the floor base to tip over,
causing injury to the patient and/or assistants.
Floor Base MUST be positioned under the bed at the headboard position.
Ensure that the snap buttons fully protrude through the adjustment hole of the floor leg
assembly. This ensures that the Floor Base is properly installed and securely locked in position.
Invacare products are specifically designed and manufactured for use in conjunction with
Invacare accessories. Accessories designed by other manufacturers have not been tested by
Invacare and are not recommended for use with Invacare products.
Assembling the Floor Base
NOTE: For this procedure, refer to FIGURE 1 on page 2.
1.
Install the ʺAʺ frame into the floor base assembly with the snap buttons facing the short length of the floor base.
2.
Depress the snap button on one leg of the ʺAʺ frame and slide it into the floor base assembly until an audible ʺclickʺ is 
heard. 
For more information regarding Invacare products, parts, and services, please visit www.invacare.com
Part No 1013153
SAVE THESE INSTRUCTIONS
Safety Summary
WARNING
INSTALLATION WARNINGS
ACCESSORIES WARNING
1
rds.
Floor Base and Fixed Trapeze

Advertisement

loading

Summary of Contents for Invacare 7714P

  • Page 1 This ensures that the Floor Base is properly installed and securely locked in position. ACCESSORIES WARNING Invacare products are specifically designed and manufactured for use in conjunction with Invacare accessories. Accessories designed by other manufacturers have not been tested by Invacare and are not recommended for use with Invacare products.
  • Page 2 Repeat STEP 2 for the opposite side. Snap Buttons NOTE: Ensure that the snap buttons fully protrude through the  “A” Frame adjustment hole of the floor leg assembly. This ensures that the  Floor Base is properly installed and securely locked in position. Attach trapeze to floor base/bed end. Refer to Attaching  Trapeze to Floor Base/Bed End on page 2. Floor Base Assembly Short Length FIGURE 1 Assembling the Floor Base Attaching Trapeze to Floor Base/Bed End NOTE: For this procedure, refer to FIGURE 2 on page 3. Perform one of the following: • Floor Base Position the lower bed bracket in the center of the bottom rail with the tubular hook facing DOWN.  ii. Tighten wing nuts to secure lower bed bracket onto bottom rail. • Bed End  Position the lower bed bracket in the center of the bottom bed frame with the tubular hook facing UP.  ii.
  • Page 3 Bed End Floor Base Tubular Hook Offset Bar Trapeze INCORRECT Wing MOUNTING Upper Bed Bracket CORRECT Clamp Chain MOUNTING Links Top Rail Offset Top Rail Grab Bar “S” Hook Upper Bed Lower Bed Bracket Tubular Bottom Rail Bracket Hook Wing Nut Lower Bed Socket Floor...
  • Page 4 This warranty gives you specific legal rights and you may also have other legal rights which vary from state to state. Invacare warrants this product to be free from defects in materials and workmanship for a period of three years from the date of purchase when purchased new and unused from Invacare or an authorized provider for the original purchaser.

This manual is also suitable for:

7740pG7740p