GE Digital Energy LP 33 Series Operating Manual page 22

50 & 60 kva
Hide thumbs Also See for Digital Energy LP 33 Series:
Table of Contents

Advertisement

MAINS
f=60.0Hz
U1=120V U2=119V
U3=121V
RECTIFIER
f=60.0Hz
U1=120V U2=119V
U3=121V
INVERTER:
U1=120V
U2=120V
U3=120V
Frequency
=
60.0Hz
Synchronized
LOAD ON PHASE
U1=120V I1=83A
U2=120V I2=75A
U3=120V I3=91A
MISCELLANEOUS
Battery Temp.
= +25°C
UPS Oper Time=
INV Oper Time=
MAINS FAULTS STAT.
Minor
=
Major
=
Overloads
=
IDENTIFICATION
LP 33
60kVA P1
SW Version:
S/N: Q0060-2307-0001
ECO Mode RATE 100%
NR FAST TRANSIENT
<2ms >2ms >5ms >10ms
25
10
7
Modifications reserved
OPM_LPS_3UO_50K_60K_0US_V010.doc
1.
Mains input voltage information screen.
2.
Mains input frequency.
3.
Mains line voltage L1 (A) and L2 (B)phases.
4.
Mains line voltage L3 (C) phase.
1.
Rectifier input voltage information screen.
2.
Mains input frequency.
3.
Input line voltage L1 (A) and L2 (B) phases.
4.
Input line voltage L3 (C) phase.
1.
Inverter voltage information screen.
2.
Output inverter line voltage L1 (A), L2 (B) and L3 (C) phases
3.
Output frequency.
4.
Synchronization status inverter with respect to mains.
1.
Load on output phases information screen.
2.
Voltage, current and load percentage phase L1 (A).
50%
45%
3.
Voltage, current and load percentage phase L2 (B).
55%
4.
Voltage, current and load percentage phase L3 (C).
1.
Screen informing about the battery and time of operation.
2.
Battery temperature.
450h
3.
Operating time (CPU powered) for the UPS (hours).
430h
4.
Operating time with inverter supplying the load (hours).
1.
Screen informing about the quality of the input power.
2.
The quantity of bypass mains out of tolerance faults.
100
150
3.
The quantity of rectifier mains out of tolerance faults.
30
4.
The total number of detected output overloads.
1.
Screen containing the data identifying the unit.
2.
UPS family, nominal rating and for RPA: P + no. UPS.
x.x
3.
The software version implemented on the control board.
4.
The serial number of the unit.
Screen containing the statistic evaluation in % (100= good; 0= bad)
of the utility, for the ECO Mode operation.
4.
The number of fast transients occurred on the bypass utility on
3
the last seven days.
Page 22/57
Operating Manual LP 33 Series 50 & 60 kVA

Advertisement

Table of Contents
loading

Table of Contents