Sign in today to find solutions:

Don't have an account? Sign up

 
GE Industrial Systems
GE Digital Energy
General Electric Company
CH - 6595 Riazzino (Locarno)
Switzerland
LP 11U UPS
INSTALLATION / USER MANUAL
Digital Energy™ LP 11U
Uninterruptible Power Supply
Telephone +41 (0)91 / 850 51 51
Fax
Website
Technology for the Digital World.
5-6-8-10 kVA
+41 (0)91 / 850 51 44
www.gedigitalenergy.com
ver 3.0 - US

Summary of Contents

  • Page 1

    GE Industrial Systems INSTALLATION / USER MANUAL Digital Energy™ LP 11U GE Digital Energy General Electric Company CH - 6595 Riazzino (Locarno) Switzerland LP 11U UPS Technology for the Digital World. Uninterruptible Power Supply 5-6-8-10 kVA Telephone +41 (0)91 / 850 51 51...

  • Page 3

    The illustrations and plans describing the equipment are intended as general reference only and are not necessarily complete in every detail. The content of this publication may be subject to modification without prior notice, no liability can be accepted for any error or omission. LX: OPM_LPU_11U_5K0_10K_1US_V030 GE DE LP 11U UPS: Installation / User Manual 3.0 (US)

  • Page 4: Table Of Contents

    5.5.2 Utility start 5.5.3 Sleep and wake-up 5.5.4 Overload protection in bypass mode 5.5.5 ECO-Mode 5 5.6 Auto restart 5.5.7 Superior battery management LX: OPM_LPU_11U_5K0_10K_1US_V030 Digital Energy CONTENTS GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ LP Series...

  • Page 5

    8.4 Safety 8.5 Storage 8.6 Recycling the UPS at the end of service life TROUBLESHOOTING ... 39 SPECIFICATIONS ... 40 APPENDIX: INSTALLATION DRAWINGS LX: OPM_LPU_11U_5K0_10K_1US_V030 Digital Energy GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ LP Series...

  • Page 6: Save These Instructions, General, Installation

    By opening or removing covers you run the risk of exposure to dangerous voltages! While every care has been taken to ensure the completeness and accuracy of this manual, GE accepts no responsibility or liability for any loss or damage resulting from the use of the information contained in this document.

  • Page 7: Storage, Batteries

    Proper disposal or recycling of the batteries is required. Refer to your local codes for disposal requirements. LX: OPM_LPU_11U_5K0_10K_1US_V030 Digital Energy Kobe HV7-12 or Panasonic LC-R127R2P Kobe HV12-12 or Panasonic LC-RA1212P GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ LP Series...

  • Page 8: Description, Warranty

    More than ever before, today's advanced electronic equipment, with complex integrated circuits and other sensitive electronics, needs a stable and continuous AC power supply to operate correctly. While the power coming from the wall outlet is often unreliable, a GE Digital Energy™ LP-U UPS provides the security of completely uninterrupted power.

  • Page 9: Principles Of Operation, Normal Conditions, Utility Failure

    P.F. = 1 CONVERTER/ OUTPUT RECTIFIER/ CONVERTER BATTERY CHARGER SYSTEM BATTERY ON/OFF MICROPROCESSOR CONTROL GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ Digital Energy LP Series SWITCH TO LOAD FILTER OPTION SLOTS FOR: RPA CARD OUTPUT...

  • Page 10: Automatic Bypass Switch, Manual Bypass Switch

    OUTPUT RECTIFIER/ CONVERTER BATTERY CHARGER SYSTEM ON/OFF MICROPROCESSOR CONTROL Figure 5 . Bypass operation: Manual bypass GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ Digital Energy LP Series MANUAL BYPASS SWITCH TO LOAD FILTER OPTION SLOTS FOR:...

  • Page 11: Transport, Unpacking, Package Contents, Location, Installation

    Table 1. external input fuse value LX: OPM_LPU_11U_5K0_10K_1US_V030 4 - Installation (Amps) 208V 240V 120V (1 X) GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ Digital Energy LP Series Output overcurrent protection (Max. Amps) 120V 208V...

  • Page 12

    4 AWG 6 AWG Output voltage 208V 240V 10 AWG 10 AWG 10 AWG 10 AWG 8 AWG 8 AWG 8 AWG 8 AWG GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ Digital Energy LP Series...

  • Page 13: Installation Procedures

    I/O voltages are different from the default (208Vac), performed as well. Proceed with 4.5.4. 12. For a quick start proceed with section 5.2 ‘Start-up’. GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ Digital Energy LP Series...

  • Page 14

    (208Vac), software modifications should be performed as well. Proceed with 4.5.4. 12. For a quick start proceed with section 5.2 ‘Start-up’. GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ LP Series possibilities,...

  • Page 15: Available Input Voltages: Hardware Modifications, Input Voltage 208 Or 240vac

    Figure 9. LP 5/6/8/10-11U: Output (grey) / input terminals For the output voltage proceed with 4.5.3. LX: OPM_LPU_11U_5K0_10K_1US_V030 Digital Energy Figure 8a. LP 5/6/8/10-11U: Rear view GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ LP Series...

  • Page 16: Input Voltage 120vac (optional, 5/6kva Only, Available Output Voltages: Hardware Modifications, Output Voltage 208vac

    Connect the ground wire to terminal 5. Ground connection is essential! See figure 11. Figure 11. LP 5/6/8/10-11U: 208 Vac output connection Return to either 4.5.1.1 step 5 or 4.5.1.2 step 5 LX: OPM_LPU_11U_5K0_10K_1US_V030 Digital Energy GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ LP Series...

  • Page 17

    LX: OPM_LPU_11U_5K0_10K_1US_V030 Digital Energy Output tap changed to 240 Volt (park) (park) (connect) Figure 12. LP 5/6/8/10-11U: Figure 12a. LP 5/6/8/10-11U: Rear view GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ LP Series Output tap change...

  • Page 18: Output Voltage 220/230/240vac, Output Voltage 120vac Single Phase

    Return to either 4.5.1.1 step 5 or 4.5.1.2 step 5. Figure 15. LP 5/6/-11U: 120 Vac single phase output connection LX: OPM_LPU_11U_5K0_10K_1US_V030 Digital Energy Figure 14. LP 5/6/8/10-11U: 220/230/240 Vac output connection GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ LP Series...

  • Page 19: Input / Output Voltages: Software Modification

    To return to the default screen scroll to the set-up screens first and press 'Enter/Reset'. You can also wait 20 seconds: the time-out period of no key activity. You can now proceed with 5.1 or 5.2. LX: OPM_LPU_11U_5K0_10K_1US_V030 Digital Energy GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ LP Series...

  • Page 20

    Re-install the interface card. If the contact is opened, the UPS will generate an ‘EXTERNAL BATTERY FUSE FAILURE’. See 5.3.2 for more information. Proceed with 4.5.1 or 5.2. GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ LP Series...

  • Page 21: Notes Concerning Installation Of A Parallel System

    1-PHASE 3-WIRE INPUT INPUT JUNCTION LP-UPS LP-UPS RPA CARD RPA CARD OUTPUT JUNCTION TO LOAD GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ Digital Energy LP Series TERMINATOR LP-UPS RPA CARD YELLOW NETWORK CABLES AS DELIVERED...

  • Page 22: Notes Concerning Starting Up The Parallel System

    Digital Energy Figure 18. Appointing a unique number to each UPS in the system AUTORESTART OFF PRESS ENTER LP 5-11U LOAD 40% AUTORESTART OFF SETTING MISMATCH GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ LP Series...

  • Page 23: Notes Concerning Use / Maintenance Of A Parallel System

    4. Reinstall the installation input fuse, 5. Connect the output of the UPS to the output junction, 6. Switch on the UPS. LX: OPM_LPU_11U_5K0_10K_1US_V030 Digital Energy GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ LP Series...

  • Page 24: Description Of Front And Rear Panel

    Option slot for RPA (Redundant Parallel Architecture) Card. Not available yet. DC socket / connector. Battery fuse holder Conduit box Cable inlet GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ Digital Energy LP Series 1 = Load on UPS 2 = Load on utility...

  • Page 25

    DC socket (14Ah only) DC connector Battery fuse holder(s) 7Ah: 2 fuses 14Ah: 4 fuses Gland to fasten cable in conduit box of UPS GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ Digital Energy LP Series...

  • Page 26: Start-up

    If not yet switched on, the equipment connected to the UPS can be switched on now; operate as usual. LX: OPM_LPU_11U_5K0_10K_1US_V030 Digital Energy GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ LP Series...

  • Page 27: Information Menu

    The remaining battery runtime (or autonomy) during a utility failure. AUTONOMY TIME LEFT 5:27:00 The total operating time of the UPS. OPERATING TIME 0YEAR 29DAYS LX: OPM_LPU_11U_5K0_10K_1US_V030 Digital Energy GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ LP Series...

  • Page 28: Status And Alarm Menu

    The battery temperature is too high due to a battery failure or a too high BATTERY CHARGER ambient temperature TEMP TOO HIGH LX: OPM_LPU_11U_5K0_10K_1US_V030 extreme environmental temperature lack of proper ventilation an overload situation fan failure GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ Digital Energy LP Series...

  • Page 29

    60.0Hz operation is inhibited: if for whatever reason the output converter is unable to deliver the required output, output power is lost. LX: OPM_LPU_11U_5K0_10K_1US_V030 Digital Energy GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ LP Series...

  • Page 30: Service Menu

    First line: service information on charger. ‘1’ = batteries have reached float FLOAT CHARGE: voltage. OUTPUT FAST : Second line: service information on output converter. LX: OPM_LPU_11U_5K0_10K_1US_V030 Digital Energy GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ LP Series...

  • Page 31: Set-up Menu

    Service set-up information about the autorestart function. This function can AUTO RESTART be switched on or off by pressing ‘Enter/Reset’, depending on the actual ENTER/RESET CHNG status. See also 4.5.6. LX: OPM_LPU_11U_5K0_10K_1US_V030 Digital Energy GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ LP Series...

  • Page 32

    If you proceed, the information about the actual battery condition (as a result of a deep battery test) is lost. For more info see section 5.4.3 'Deep Battery Test'. GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ LP Series...

  • Page 33: Test Screens, Battery Test, General, Quick Battery Test

    GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ LP Series bypass switch. Range:...

  • Page 34: Deep Battery Test

    The test could not be executed properly: not all test conditions were fulfilled. TEST FAILED TEST FAILED TEST FAILED TEST FAILED The UPS system was not informed about the actual battery condition! LX: OPM_LPU_11U_5K0_10K_1US_V030 Digital Energy GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ LP Series...

  • Page 35: Other Features, Shutdown, Utility Start, Sleep And Wake-up, Overload Protection In Bypass Mode

    'BATTERY DEPLETED' will be shown. The run time is zero. 5.5.3 Sleep and wake-up GE Digital Energy™ UPS monitoring software allows you to program a 'sleep period' of the UPS by sending two commands to the UPS: - shut down after # minutes, and subsequently: - shut down during # hours.

  • Page 36: Eco-mode, Auto Restart, Superior Battery Management

    (-18mV/ C or -32.4mV/ F per 12V battery). As a result poor charging of the batteries under low temperature conditions and overcharging of the batteries under high temperature conditions are prevented. LX: OPM_LPU_11U_5K0_10K_1US_V030 Digital Energy GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ LP Series...

  • Page 37

    When the utility power returns, the systems will automatically start up and will be up and running as soon as possible. For specific information on GE Digital Energy™ connectivity products please contact your dealer or internet: www.gedigitalenergy.com.

  • Page 38

    The RPA-facility allows to connect 2, 3 or 4 units in parallel. Connecting GE Digital Energy™ LP-U units in parallel is attractive for several reasons. Redundancy: To achieve the highest possible level of power protection in a fault-tolerant network.

  • Page 39

    Seismic anchors can be ordered separately; contact your local dealer. LX: OPM_LPU_11U_5K0_10K_1US_V030 Connector Nema L14-30R (1) TCBs (8) Connector Nema L6-30R (2) Connector Nema L5-20R (4) GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ Digital Energy LP Series...

  • Page 40

    It does not contain CFCs (Carbon Fluorine Chloride) of HCFCs (Halogen Carbon Fluorine Chloride). GE Digital Energy, in compliance with environment protection recommends that the UPS equipment, at the end of its service life, must be recycled conforming to the local applicable regulations.

  • Page 41

    Wait for a few hours, leave the UPS switched on.* Hardware output voltage detection 'Q4' is active. Please contact your dealer. GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ Digital Energy LP Series...

  • Page 42

    Automatic shut down (or transfer to bypass, if bypass is available) in case of - low/high DC voltage - overtemperature - overload / short circuit GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ Digital Energy LP Series...

  • Page 43

    21/50 22/50 240/14 240/14 240/14 45/90 35/75 33/70 VSDT2 + VSD2 995x313x730 39.2x12.3x28.7 175 Kg 386 Lbs GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ Digital Energy LP Series 10-11U 12/12 12Ah 240/7 16/39 240/14 25/57...

  • Page 44

    FCC part 15, class A; EN 50091-2 -10 to +40°C (14 to 104°F) 40 - 50dB(A), the audible noise is load and temperature dependent GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ Digital Energy LP Series...

  • Page 45

    UPS cabinet, dimensions hxwxd: 680 x 310 x 710 mm 26.8 x 12.3 x 28.7 inch Center of gravity, position: GE DE LP 11U UPS: Installation / User Manual 3.0 (US) ™ LP Series 275 mm / 10.8 inch 155 mm / 6.1 inch...

  • Page 46

    Model Heat dissipation Dimensions Linear load 240 Volt 100% load 50% load LP-U Btu/hr Btu/hr Inch 5-11 1950 1329 26.8 6-11 2254 1300 26.8 8-11 3234 1882 26.8 10-11 1090 3719 1896 26.8 5-11/120 V 2187 1451 39.2 6-11/120 V 2539 2051 39.2...

  • Page 47

    LEVELLER POSITION A: FIX UPS TO THE FLOOR POSITION B: LIFT UPS CASTORS FROM THE FLOOR LP 5/6/8/10-11U 208-240V input MANUAL BYPASS SWITCH NORMAL: POSITION 1 (LOAD ON UPS) SERVICE: POSITION 2 (LOAD ON BYPASS) INPUT/OUTPUT TERMINALS OUTPUT INPUT EARTH CONNECTION IS ESSENTIAL CASTORS...

  • Page 48

    CASTORS LEVELLER POSITION A: FIX UPS TO THE FLOOR POSITION B: LIFT UPS CASTORS FROM THE FLOOR LP 5/6-11U 120V input MANUAL BYPASS SWITCH NORMAL: POSITION 1 (LOAD ON UPS) SERVICE: POSITION 2 (LOAD ON BYPASS) INPUT/OUTPUT OUTPUT INPUT EARTH CONNECTION IS ESSENTIAL CONDUIT BOX...

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: