Related Manuals for Seagate ST500UM000
Summary of Contents for Seagate ST500UM000
- Page 1 Product Manual Seagate Laptop Thin SSHD ® Standard models ST500UM000 ST320UM000 Gen 2 100724267 Rev. B June 2013...
- Page 2 Publication number: 100724267, Rev. B June 2013 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Momentus and SeaTools are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries.
-
Page 3: Table Of Contents
ONTENTS ......... . . 1 EAGATE ECHNOLOGY UPPORT... - Page 4 IGURES 5V S ......7 IGURE YPICAL TARTUP AND PERATION URRENT ROFILE SATA C .
-
Page 5: Seagate Technology Support Services
Authorized Service Centers For information regarding Warranty Support, visit:http://www.seagate.com/support/warranty-and-replacements/ For information regarding data recovery services, visit http://www.seagate.com/services-software/data-recovery-services/ For Seagate OEM and Distribution partner portal, visit: http://www.seagate.com/partners/ For Seagate reseller portal, visit: http://www.seagate.com/partners/my-spp-dashboard/ Seagate Laptop Thin SSHD Product Manual, Rev. B... -
Page 6: Introduction
NTRODUCTION ® Laptop Thin SSHD This manual describes the functional, mechanical and interface specifications for the following Seagate Seagate model drives: Standard models ST500UM000 ST320UM000 These drives provide the following key features: 5400-RPM spindle speed. 64MB buffer. 32GB NAND flash ... -
Page 7: F Ormatted C Apacity
The specification summaries listed in the following tables are for quick reference. For details on specification measurement or definition, refer to the appropriate section of this manual. Table 1 Drive Specifications Summary ST500UM000 ST320UM000 RIVE PECIFICATION... -
Page 8: Drive Specifications
RIVE PECIFICATIONS Table 1 Drive Specifications Summary (continued) ST500UM000 ST320UM000 RIVE PECIFICATION 37.7°C max (operating) Wet bulb temperature (max) 40.0°C max (nonoperating) Altitude, operating –304.8 m to 3048 m (–1000 ft to 10,000+ ft) Altitude, nonoperating –304.8 m to 12,192 m (–1000 ft to 40,000+ ft) -
Page 9: Physical Organization
RIVE PECIFICATIONS HYSICAL ORGANIZATION Drive model Read/write heads Number of discs ST500UM000 ST320UM000 ECORDING AND NTERFACE ECHNOLOGY Interface Serial ATA (SATA) Recording method Perpendicular Recording density 1894 Kb/in Track density 375 ktracks/in avg Areal density 705 Gb/in Spindle speed 5400 RPM +/- 0.2%... -
Page 10: Start / Stop Times
RIVE PECIFICATIONS TART STOP TIMES Table 3 Start/stop times ° Typical seek times (ms) Typical Max @ 25 Power-on to ready (sec) <1.0 <1.0 Standby to ready (sec) <1.0 <1.0 OWER PECIFICATIONS The drive receives DC power (+5V) through a native SATA power connector (refer to Figure 2.7.1 Power consumption... - Page 11 RIVE PECIFICATIONS Table 4 DC Power Requirements (25° C) OWER ISSIPATION INPUT AVERAGE Spinup (max) <1.20A Seek average 2.5W Write average 3.5W Read average 2.9W Idle, performance 1.5W Idle, active 1.0W Idle, low power mode 0.9W 0.53W Standby Sleep 0.53W During periods of drive idle, some offline activity may occur according to the S.M.A.R.T.
-
Page 12: Conducted Noise
RIVE PECIFICATIONS 2.7.2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 15-ohm resistive load on the +5 volt line. Using 5-volt power, the drive is expected to operate with a maximum of 100 mV peak-to-peak square-wave injected noise at up to 10 MHz. -
Page 13: Nvironmental Pecifications
NVIRONMENTAL PECIFICATIONS This section provides the temperature, humidity, shock, and vibration specifications for Seagate Laptop Thin SSHD drives. Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Above 1000 feet (305 meters), the maximum temperature is derated linearly by 1°C every 1000 feet. -
Page 14: Acoustics
Seagate follows the ECMA-74 standards for measurement and identification of PDTs. An exception to this process is the use of the absolute threshold of hearing. Seagate uses the lower limit for the threshold curve* to discern tone audibility and to compensate for the inaudible components of sound prior to computation of tone ratios according to Annex D of the ECMA-74 standards. -
Page 15: Reliability
Communications Commission verification or certification of the device is required. Seagate has tested this device in enclosures as described above to ensure that the total assembly (enclosure, disk drive, motherboard, power supply, etc.) does comply with the limits for a Class B computing device, pursuant to Subpart J, Part 15 of the FCC rules. Operation with noncertified assemblies is likely to result in interference to radio and television reception. -
Page 16: Environmental Protection
Users should use caution exposing any electronic components to uncontrolled chemical pollutants and corrosive chemicals as electronic drive component reliability can be affected by the installation environment. The silver, copper, nickel and gold films used in Seagate products are especially sensitive to the presence of sulfide, chloride, and nitrate contaminants. Sulfur is found to be the most damaging. In addition, electronic components should never be exposed to condensing water on the surface of the printed circuit board assembly (PCBA) or exposed to an ambient relative humidity greater than 95%. -
Page 17: Configuring And Mounting The Drive
Figure Figure 2 Attaching SATA Cabling Signal connector Power connector Signal cable Power cable Each cable is keyed to ensure correct orientation. Seagate Laptop Thin SSHD drives support latching SATA connectors. SSHD P EAGATE APTOP RODUCT ANUAL... -
Page 18: Drive Mounting
ONFIGURING AND OUNTING THE RIVE RIVE OUNTING You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes. Refer Figure 3 for drive mounting dimensions. Follow these important mounting precautions when mounting the drive: Allow a minimum clearance of 0.030 in (0.76 mm) around the entire perimeter of the drive for cooling. -
Page 19: Serial Ata (Sata) Interface
For detailed information about the Serial ATA interface, refer to the Serial ATA: High Speed Serialized AT Attachment specification. OMPATIBILITY Seagate Laptop Thin SSHD drives incorporate connectors which enable you to hot plug these drives in accordance with the Serial ATA: High Speed Serialized AT Attachment specification revision 2.0. This specification can be downloaded from . -
Page 20: Serial Ata Device Plug Connector Pin Definitions
ATA (SATA) I ERIAL NTERFACE ATA D ERIAL EVICE ONNECTOR EFINITIONS Table 8 summarizes the signals on the Serial ATA interface and power connectors. Refer to the Notes below. Table 8 Serial ATA Connector Pin Definitions EGMENT UNCTION EFINITION Ground 2nd mate Differential signal pair A from Phy Ground... -
Page 21: Supported Ata Commands
ATA C UPPORTED OMMANDS Table 9 lists Serial ATA standard commands that the drive supports. For a detailed description of the ATA commands, refer to the Serial ATA International Organization: Serial ATA (Revision 2.6). Refer to www.sata-io.org on page 24 Refer to for details and subcommands used in the S.M.A.R.T. - Page 22 ATA (SATA) I ERIAL NTERFACE Table 9 Supported ATA commands ATA-standard commands names Command code (in hex) S.M.A.R.T. Enable Operations B0h/D8h S.M.A.R.T. Enable/Disable Auto Offline B0h/DBh S.M.A.R.T. Enable One Attribute Modification B0h/E0h S.M.A.R.T. Execute Offline B0h/D4h S.M.A.R.T. Free Fall Protection Host Interface S.M.A.R.T.
-
Page 23: Identify Device Command
Read Multiple or Write Multiple command Total number of user-addressable sectors This field contains a value that is one greater than the total number of ST500UM000 = 0FFFFFFFh 60–61 user-addressable sectors. The maximum value that shall be placed in this ST320UM000 = 0FFFFFFFh field is 0FFFFFFFh. - Page 24 98-99 Streaming Performance Granularity 0000 Total number of user-addressable LBA sectors available (see Section 3.2 for related information) ST500UM000 = 976,773,168 100–103 ST320UM000 = 488,397,168 These words are required for drives that support the 48-bit addressing feature. Maximum value: 0000FFFFFFFFFFFFh.
- Page 25 1 = Free Fall Protection feature is enabled Free Fall Protection enable/disable (bit 5) 0 = Free Fall Protection feature is disabled 121–127 ATA-reserved 0000 Security status 0021 129–159 Seagate-reserved xxxx 160–221 ATA-reserved 0000 Transport major version number 101F 223–254 ATA-reserved...
- Page 26 ATA (SATA) I ERIAL NTERFACE Table 11 Bit Descriptions (continued) Ultra DMA mode 6 is supported. Ultra DMA mode 0 is currently active. Ultra DMA mode 1 is currently active. Ultra DMA mode 2 is currently active. Ultra DMA mode 3 is currently active. Ultra DMA mode 4 is currently active.
-
Page 27: Set Features Command
ATA (SATA) I ERIAL NTERFACE 4.3.2 Set Features command This command controls the implementation of various features that the drive supports. When the drive receives this command, it sets BSY, checks the contents of the Features register, clears BSY and generates an interrupt. If the value in the register does not represent a feature that the drive supports, the command is aborted. -
Page 28: Commands
) that eliminates unnecessary drive returns. The diagnostic software ships with all new drives and is also available at: http://www.seagate.com/support/downloads/seatools/. This drive is shipped with S.M.A.R.T. features disabled. You must have a recent BIOS or software package that supports S.M.A.R.T. to enable this feature. -
Page 29: E Lectromagnetic I Mmunity
NDEX errors 11 ESD 13 acoustics 10 EU 11 active mode 8 EU RoHS directive 12 Address 17 European Union (EU) requirements 11 agency certification 11 evice Configuration Identify 17 ambient temperature 5 Execute Device Diagnostics 17 areal density 5 ATA commands 17 Australia/New Zealand Standard AS/NZS3548 1995 11 FCC verification 11... - Page 30 S.M.A.R.T. implementation 17 operating shock 9 safety certification 11 operating vibration 9 SATA ports 2 screws 14 Seagate Technology Support Services 1 physical characteristics 5 sectors 4 Physical organization 5 Security Disable Password 18 point-to-point 2 Security Erase Prepare 18...
- Page 31 UL60950-1 11 vibration 9 voltage dips, interrupts 10 voltage tolerance 8 warranty 11 weight 5 width 5 Write Buffer 18 Write DMA 18 Write DMA Extended 18 Write Long with Retries 18 Write Long without Retries 18 Write Multiple 18 Write Sectors 18 SSHD P EAGATE...
- Page 32 Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000 ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888 EUROPE, MIDDLE EAST AND AFRICA Seagate Technology SAS 16-18 rue du Dôme, 92100 Boulogne-Billancourt, France, 33 1-4186 10 00 Publication Number: 100724267, Rev.