GE JKP27 Owner's Manual page 13

Built-in electric wall oven
Hide thumbs Also See for JKP27:
Table of Contents

Advertisement

Using the clock and timer.
Make sure the clock is set to the
correct time of day.
The timer is a minute timer only.
The timer does not control oven
operations. The maximum setting on
the timer is 9 hours and 59 minutes.
To Set the Clock
The clock must be set to the correct time
of day for the automatic oven timing
functions to work properly. The time of
day cannot be changed during a timed
baking or self-cleaning cycle.
To Set the Timer
Press the KITCHEN TIMER
ON/OFF pad.
Press the HOUR and MIN + or
– pads until the amount of time
you want shows in the display.
If you make a mistake, press
KITCHEN TIMER ON/OFF and begin
again.
Press the START pad.
After pressing the START pad, SET disappears;
this tells you the time is counting down, although
the display does not change until one minute
has passed.
To Reset the Timer
If the display is still showing the time
remaining, you may change it by pressing
the KITCHEN TIMER ON/OFF pad, then
press the HOUR and MIN + or – pads until
the time you want appears in the display.
To Cancel the Timer
Press the KITCHEN TIMER ON/OFF
pad twice.
www.GEAppliances.com
Press the CLOCK pad.
Press the HOUR and MIN + or
– pads to set the time of day.
Press the START pad.
When the timer reaches :00 , the
control will beep 3 times followed
by one beep every 6 seconds until
the KITCHEN TIMER ON/OFF pad
is pressed.
The 6 second tone can be canceled by following
the steps in the Special features of your oven
control section under Tones at the End of a
Timed Cycle.
If the remaining time is not in the display
(clock, delay start or cooking time are in
the display), recall the remaining time by
pressing the KITCHEN TIMER ON/OFF pad
and then pressing the HOUR and MIN +
or – pads to enter the new time you want.
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jrp24Jtp45Jtp47Jkp45Jtp27

Table of Contents