Download Print this page
GE Advantium JX2200 Assembly Instructions
GE Advantium JX2200 Assembly Instructions

GE Advantium JX2200 Assembly Instructions

Built-in accessory storage drawer

Advertisement

Available languages

Available languages

Quick Links

GE Consumer & Industrial Appliances

Assembly Instructions

Advantium
JX2200, JX2201, ZX2201

BEFORE YOU BEGIN

Read these instructions completely and carefully. Read
the Installation Instructions for the Advantium 120V or
240V oven completely and carefully for cutout dimen-
sions and step-by-step instructions.
IMPORTANT
local inspector's use.
IMPORTANT
and ordinances.
NOTE TO INSTALLER:
instructions with the Consumer.
NOTE TO CONSUMER:
your Advantium 120V or 240V Oven Owner's Manual
for future reference.
SKILL LEVEL:
Installation of this appliance requires
basic mechanical skills.
COMPLETION TIME:
of an Advantium 120V or 240V oven.
• Proper installation is the responsibility of the installer.
• Product failure due to improper installation is not
covered under the Warranty. See the Advantium
120V or 240V Oven Owner's Manual for warranty
information.
MODELS AVAILABLE
Profile Models:
JX2200BB–Black
JX2201SS–Stainless Steel
Monogram Models:
ZX2201SS–Stainless Steel (for installation above 36" only)
NOTE: Advantium 240V model ZSC2202SS and
Advantium 120V model ZSC1202 CANNOT be
installed with an accessory storage drawer. See
Installation Preparation Without an Accessory Storage
Drawer in the Installation Instructions for these models.
®
Built-In Accessory Storage Drawer
Save these instructions for
Observe all governing codes
Be sure to leave these
Keep these instructions with
One hour with the installation
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
PRODUCT DIMENSIONS AND CLEARANCES
Allow 15" Clearance
When Fully Open
NOTE: Appearance will vary by model.
TOOLS REQUIRED
• #2 Phillips screwdriver
PARTS SUPPLIED
• Side supports (2)
• Brass screws (8)
• Color-matched screws (5)
1
REMOVE PACKAGING AND PARTS
• Remove the drawer from the carton.
• Remove all packing material and tape.
• Open the drawer and remove any parts inside.
• Locate parts.
Assembly Instructions
Screws
(6 required,
2 extra)
5"
• Under-the-Counter
Mounting Bracket (1)
Side Supports (2)
Under-the-Counter (UTC)
Mounting Bracket
Color-Matched
Screws
(4 required,
1 extra)
MFL06213304 49-40594 12-08 JR

Advertisement

loading

Summary of Contents for GE Advantium JX2200

  • Page 1: Assembly Instructions

    GE Consumer & Industrial Appliances Assembly Instructions Advantium ® Built-In Accessory Storage Drawer JX2200, JX2201, ZX2201 BEFORE YOU BEGIN Read these instructions completely and carefully. Read the Installation Instructions for the Advantium 120V or 240V oven completely and carefully for cutout dimen- sions and step-by-step instructions.
  • Page 2 ASSEMBLY TO ADVANTIUM BUILT-IN SPEEDCOOK OVEN UNDER-THE-COUNTER (UTC) MOUNTING BRACKET INSTALLATION NOTE: For UTC models PSB1200, PSB1201 and ZSC1201 only. Open the accessory drawer so you have access to the top bracket. Remove the three screws securing the top bracket. Install the new UTC mounting bracket using the screws removed previously.
  • Page 3: Instrucciones De Montaje

    GE Consumer & Industrial Appliances Instrucciones de montaje Cajón de almacenamiento de accesorios empotrado Advantium JX2200, JX2201, ZX2201 ANTES DE COMENZAR Lea estas instrucciones por completo y con detenimiento. Lea las Instrucciones de instalación del horno Advantium de 120V o 240V por completo y con detenimiento sobre las dimensiones del recorte y las instrucciones paso a paso.
  • Page 4 MONTAJE EN UN HORNO DE COCCIÓN RÁPIDA EMPOTRADO ADVANTIUM INSTALACIÓN DE SOPORTE DE MONTAJE BAJO EL MOSTRADOR (BEM) NOTA: Sólo para modelos BEM PSB1200, PSB1201 y ZSC1201. Abra el cajón de accesorios para tener acceso al soporte superior. Quite los tres tornillos que fijan el soporte superior. Instale el nuevo soporte de montaje BEM utilizando los tornillos quitados anteriormente.

This manual is also suitable for:

Advantium jx2201Advantium zsc1202Advantium zsc2202ssAdvantium zx2201