Trimming Scenes - Canon VIXIA HF R42 Insrtruction Manual

Trimming Scenes

You can trim MP4 scenes by removing everything up to a certain point
or everything after a certain point. By doing so, you leave only memo-
rable moments to keep for posterity.
Operating modes:
1 Play back the desired scene (A 50).
2 Touch the screen and then touch [Ý] to pause the playback.
3 Open the screen for trimming scenes.
>
[Edit]
4 Bring the scene to a precise point, if necessary.
• The point at which is movie will be trimmed is indicated by the
marker.
• Playback controls will appear on the screen (A 52). Use any special
playback modes (fast playback, frame reverse/advance) as
necessary to locate the desired point.
5 Trim the scene.
[Trim]
marker
over the existing scene
Touch [Stop] to interrupt the operation while it is in progress.
NOTES
• You may not be able to trim the following types of scenes.
- 6/4 Scenes copied from the built-in memory to an SDXC
memory card.
- Scenes recorded or copied using another device.
100
Advanced Playback and Editing
SCN
[Trim]
>
Select whether to trim before or after the
>
Select whether to save as a new scene or write