Buffalo WBMR-HP-GN User Manual page 19

SSID2
Wireless encryption WPA-PSK-AES is used for Multi Security SSID2.
SSID3
Wireless encryption WEP is used for Multi Security SSID3.
Advanced Wireless Settings
BSS BasicRateSet
BSS (Basic Service Set) configures the transmission rate of communication for
wireless clients. Setup choices may vary with different wireless clients.
Multicast Rate
You can select 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54Mbps or Auto.
Default Value is "Auto".
Reverse Direction Grant
Choose whether Reverse Direction Grant (RDG) function is enabled or disa-
bled. During an RD exchange sequence, the RD initiator station may transmit
PPDUs and obtain response PPDUs from a single station (RD responder) dur-
ing the exchange. Wireless LAN devices that connect to the AirStation must
also enable the RDG function.
DTIM Period
DTIM (Delivery Traffic Identification Maps' Period is an interval when wireless
LAN equipment broadcasts DTIM information. Setting larger values saves
power but may slow network traffic. This setting is ignored unless power
management is activated on the wireless client. Values that can be inputted:
1-255.Default value is "1".
17