Care And Safety Information; Setup Precautions; Cleaning Discs; Hard Disk Drive (Hdd) Handling Care - Philips DVDR3570H User Manual

Care and Safety Information

IMPORTANT NOTE!
DO NOT disconnect the recorder from
the power supply unless you are
intending not to use this product for a
long period of time. Power is needed to
enable the recorder to perform essential
tasks like timer recordings, downloading
of Electronic Program Guide information
and automatically updating the system
date/time.

Setup precautions

Finding a suitable location
– Place this unit on a fl at, hard and
stable surface. Do not place the unit on a
carpet.
– Do not place this unit on top of other
equipment that might heat it up (e.g.,
receiver or amplifi er).
– Do not put anything under this unit
(e.g., CDs, magazines).
– Install this unit near the AC outlet where
the AC power plug can be easily reached.
Space for ventilation
– Place this unit in a location with
adequate ventilation to prevent internal
heat build up. Allow at least 10 cm (4")
clearance from the rear and the top of
this unit and 5cm (2") from the left and
right to prevent overheating.
10cm )
5cm
Avoid high temperature, moisture,
water and dust
– This unit must not be exposed to
dripping or splashing.
– Do not place any object or items that
can damage this unit (e.g., liquid fi lled
objects, lighted candles).
8
5cm
10cm

Cleaning discs

CAUTION!
Risk of damage to discs! Never use
solvents such as benzene, thinner,
cleaners available commercially, or anti-
static sprays intended for discs.
Wipe the disc with a micro fi bre cleaning
cloth from the centre to the edge in a
straight line movement.
Hard Disk Drive (HDD)
handling care
To avoid damage to the hard disk and
losing important data:
– Do not move the recorder or subject
it to vibration whilst in operation.
– Do not remove the AC power plug
from the mains socket without switching
the recorder to standby mode.
It is recommended to archive important
recording to a recordable DVD as
backup.

Energy saving message

In order to minimise power consumption
in standby mode, we recommend you to
leave this unit with Eco mode enable and
turn off the front panel display brightness.
See Playback settings - { Display } option
and Setup settings - { Eco mode } option.