Advertisement
Available languages
Available languages
WINDSHIELD MOUNT ANTENNA INSTALLATION
6
A-PILLAR PANEL REMOVAL
1. Using a panel removal tool, carefully remove the driver's side
dashboard tweeter cover by lifting upward.
(FIGURE H)
2. Remove the driver's side A pillar panel by releasing the two (2) body
clips along with the lower clips where the A pillar panel meets the
dashboard. (FIGURE I)
3. Rotate the A pillar panel away from the dashboard and release the the
airbag tether clip from the top of the A pillar panel. (FIGURE J)
CAUTION! Use care when performing this step to avoid damage
to the curtain airbag. If the airbag is damaged, it must be
replaced.
4. Inspect the white protective (non-woven fabric) of the curtain airbag.
If the fabric is damaged, the curtain airbag assembly must be replaced.
PART NUMBER
ISSUE
H001SFJ600
DATE
00
18 Jul 2013
FIGURE H
FIGURE I
SUBARU OF AMERICA
FIGURE J
4 OF 12
Advertisement
