GE JP340BJ Dimensions

GE Appliances
JP340WJ/CJ/BJ – GE
Counter Installation (in inches)
13" MAX.
13" MAX.
depth
depth
30" MIN. to
30" MIN. to
unprotected
1-1/2" MIN.
18" MIN.
unprotected
cabinet
clearance to
18" MIN.
to cabinet
cabinet
to cabinet
1-3/4" to
from cut-out
rear wall
1-3/4" to
rear wall
1-3/4" MIN.
clearance to
1-3/4" MIN.
side wall
clearance to
from cut-out
side wall
Electrical junction from cut-out
box 16" MIN.
below countertop
Electrical junction
box 16" MIN.
below countertop
Specification Created 1/04
321341
30" Built-In CleanDesign Electric Cooktop
®
Cooktop Dimensions (in inches)
19-3/8
1-1/2" MIN.
side wall clearance to
side wall
from cut-out
2-1/2"
Required
*Depth of unit at conduit location (right rear) is 4-5/8"
*Depth of unit at conduit location (right rear) is 4-5/8"
KW Rating
240V
208V
Cut should
Breaker Size
not interfere
with cabinet
Cut should
240V
structure at
not interfere
front
with cabinet
208V
structure at
front
Note: If installing with a GE Profile
20-7/8
20-7/8
29-3/4 29-3/4
cooktop and downdraft installation instructions packed with product before
3-1/4* 3-1/4*
Cooktop
Cooktop
installing. Cooktop gas/electric supply may need to be re-routed to install downdraft.
Note: Consult cabinet and countertop manufacturer's specs for flush mount
28-1/8
28-1/8
installation prior to install.
19-3/8
Installation Information: Requires a 5" free area between the bottom of the
19-5/8
19-5/8
cooktop to any combustible material, i.e., shelving. Free area not required when
installing wall oven underneath cooktop. Refer to installation instructions. Requires
28-1/2
28-1/2 an 18" minimum from cooktop to adjacent overhead cabinets. Units are furnished
with a 48" flexible armored cable.
Before installing consult installation instructions, packed with product, for current
dimensional data. 36" Ribbon cooktops are approved for use over GE 30" Single Wall
2-1/2"
Ovens only. 30" Ribbon cooktops are approved for use over select GE 29" and GE 30"
Required
Single Wall Ovens. Refer to cooktop and wall oven installation instructions packed
with product for current dimensional data.
Filler Trim Kit
When replacing an old GE 30" cooktop (with larger opening) with Models
JP938/930/350/340, use the following one-piece trim kit to fill in the over-size hole.
6.4
Available at additional cost.
4.8
JXTR31B (Black glass with black, white or bisque pattern)
Flush Mount Installation Kit
Accommodates both 30" and 36" installations. Not for use with stainless steel models.
30 Amps
JXFLMBB (Black glass with black, white or bisque pattern)
30 Amps
R
For answers to your Monogram,
GE appliance questions, visit our website at
®
GEAppliances.com or call
GE Answer Center
™ Telescopic Downdraft System, consult both
Listed by
Underwriters
Laboratories
® GE Profile ™ or
service, 800.626.2000.
®