Table of Contents
Advertisement
pro security programmer Interface, 3-Pin BLACK plug
The BLACK three-pin port is provided for programming of the unit. When using the Pro
Security Programmer, it is possible to configure any and all of the programmable functions.
For more information please refer to the guide packaged with the programmer.
mounting the receiver/antenna
Receiver/antenna position should be discussed with the vehicle's owner prior to installation, since the
antenna may be visible to the vehicle's operator.
The best location for the receiver/antenna is centered high on either the front or rear windshield. For
optimal range, the antenna should be mounted vertically. It can be mounted horizontally in relation to
the windshield or under the dashboard away from metal, but range will be diminished. Metallic window
tint can also affect range, so this should be a consideration when determining the mounting location.
After determining the best mounting location, follow these steps:
1.
Clean the mounting area with a quality glass cleaner or alcohol to remove any dirt or residue.
2.
Plug the receiver/antenna cable into the receiver/antenna.
3.
Mount the receiver/antenna using the supplied double-sided tape.
4.
Route the receiver/antenna cable to the control module and plug it into the four-pin antenna connector.
I I m m p p o o r r t t a a n n t t ! ! To achieve the best possible range, DO NOT leave the antenna cable bundled
under the dash. Always extend the cable full length during installation, regardless of the
antenna mounting location.
11
Hide quick links:
Advertisement
Table of Contents
