NETGEAR N300 Installation Manual

Installation Guide
N300 Wireless Router
JWNR2010v3

Package Contents

N300 Wireless Router
Power adapter Ethernet cable
Step 1:
Unplug the power
to turn off your modem.
Internet
DSL
or Cable
Modem
Step 4:
Connect the power adapter to the
router, plug the power adapter into
and outlet, and press the
Power On/Off button on the router.
Wait until the Wireless LED turns
solid green.
Step 2:
Connect one end of the blue
Ethernet cable to your modem,
and the other end to the Internet port
on your router.
N300 Wireless Router
(not included)
Step 5:
Connect the router
to your computer.
Use another Ethernet cable to establish
a wired connection as shown in this diagram.
Optionally, connect wirelessly by using the
preset wireless security settings
located on the product label on the router.
Step 3:
Plug in, then turn on your modem.
Wait approximately two minutes
until your modem turns on.
If your modem has a battery backup,
first remove and reinsert the battery
before connecting your
modem to power.
Step 6:
Open a browser.
If the web page does not display,
close and reopen the browser
and enter http://routerlogin.net
in the address bar. The user name
and password are on the
product label on the router.