Connecting To The Internet; Adding A New Gprs/Edge/3G/4G/4G Lte Connection; Turning On Wi-Fi - Zte AT Z998 User Manual

Connecting to the Internet

Your phone's impressive networking capabilities allow you to access the Internet
or your corporate network with ease. You can use default connection settings
to connect to the web via your mobile network (GPRS/EDGE/3G/4G/4G LTE)
or Wi-Fi. The GPRS/EDGE/3G/4G/4G LTE connection can be enabled/disabled
manually. From the home screen, press
networks and check or uncheck the Data enabled check box.

Adding a New GPRS/EDGE/3G/4G/4G LTE Connection

To get connected via GPRS/EDGE/3G/4G/4G LTE, you need a data plan with your
service provider. If the GPRS/EDGE/3G/4G/4G LTE settings are not pre-configured
on your phone, please contact your provider to get the necessary information.
From the home screen, press
Access Point Names.
New APN.
Press
Tap each item to enter the information you receive from your service provider.
Tap Save to complete.
Tip: To set the APN to default settings, press

Turning on Wi-Fi

Wi-Fi provides wireless Internet access over distances of up to 300 feet
(90 meters).
Open the Notifications panel and tap Wi-Fi.
30
System settings Mobile
System settings Mobile networks
Reset to default.
Connecting to the Internet