Advertisement
Quick Links
MODEL 1703EML - THE CHAMBERLAIN ARM™
Chamberlain Garage Door Operator Owner's Manual
A
D
One-Piece Canopy Door
(vertically tracked)
For use only with one-piece canopy and dual track
doors as illustrated above. Do not use this door arm
with sectional doors, fully retractable doors or canopy
doors with jamb hardware.
Review all safety warnings on Page
one of your garage door operator
owner's manual. Ensure that the door
and all its operating gear is in good
condition and works easily when it is
manually operated.
Lubricate all garage door working parts before installing
the door arm. Ensure that the timber or metal garage door
frame on both sides and above the door is in good and
sound condition and is securely fixed to the main
structure of the garage. If there is any doubt, consult a
professional garage door installer. (See the Yellow Pages
under Garage Doors)
Do not run the operator until installation is complete.
HOTLINE:
Germany 06838 / 907100 • France 03.87.95.39.28 • UK 0800 317847 • NL 20 684 7978
114A3167A-GB
B
INSTALLATION INSTRUCTIONS
To be used in conjunction with the
Models: ML700, ML750, ML850
Before you begin, please read this entire instruction manual.
D
™
B
E
One-Piece Door with Dual Track
(vertical and horizontal)
The Chamberlain Arm™
™
E
Advertisement
Related Manuals for Chamberlain MotorLift 1703EML
Summary of Contents for Chamberlain MotorLift 1703EML
- Page 1 ™ ™ MODEL 1703EML - THE CHAMBERLAIN ARM™ INSTALLATION INSTRUCTIONS To be used in conjunction with the Chamberlain Garage Door Operator Owner’s Manual Models: ML700, ML750, ML850 Before you begin, please read this entire instruction manual. One-Piece Canopy Door One-Piece Door with Dual Track...
- Page 2 Step 15, the removal of 25mm (1”) board does not apply to not the top of the lip. canopy doors. After Step 18 is completed, proceed to page 4 in this manual to begin the installation of the Chamberlain Arm™. 114A3167A-GB...
- Page 3 W W ARN ARNING W W ARN ARNING Representative Locking Mechanism FIGURE 6 CAUTION CAUTION W W ARN ARNING To prevent damage to garage door and operator: Ensure that turning the outside handle will not actuate ANY of the locking mechanisms supplied with the door.
- Page 4 Template • Position the template horizontally to match up the centerlines of the header bracket and the template. The template is provided for use with two different types Refer to Figure 8 or Figure 9, depending on your door of doors. Position and mark holes as directed below, style.
- Page 5 Figure 12 is vertical. Use a level to assist. The tighten the screws. FIGURE 12 The Chamberlain Group, Inc. Installation of Chamberlain Door Arm to Canopy Door 1. Bolt 1. Metal or Metal-Braced Figure 11 Mounting the Door Arm (Bottom Screws) 2.
- Page 6 Open the garage door slowly and carefully by hand. 2. Connection Arm 6. Nut Watch the movement of the door arm. If the Chamberlain 3. Canopy Door Arm Door Arm hits the rail before the garage door is fully 4. Shipping cable tie open, the angle of the arms must change.
-
Page 7: Initial Operation
Initial Operation: The Chamberlain Arm™ has been designed so that, when used with a Chamberlain manufactured operator, the door will open to a fully horizontal position (Figure 16). Note: The door may be designed in such a way that it does not open to the full horizontal.