Canon PIXMA iP6600D Service Manual page 14

4 times Purge cam sensor error
[5C00]
5 times ASF (cam) sensor error
[5700]
6 times Internal temperature error
[5400]
7 times Waste ink absorber full
[5B00]
8 times Print head temperature rise
error [5200]
9 times EEPROM error [6800]
11 times Carriage lift mechanism
error [5110]
12 times AP position error [6A00]
13 times Paper feed position error
[6B00]
14 times Paper feed cam sensor error
[6B10]
15 times USB Host VBUS
overcurrent [9000]
16 times Valve sensor error [6C00]
17 times Motor driver error [6D00]
19 times Ink tank position sensor
error [6502]
20 times Other hardware error [6500] The PCI bus error is detected by the ASIC.
Continuous ROM error
An error occurred in the purge unit.
This error takes place when feeding paper
from the ASF after an error occurred in the
ASF cam sensor.
The internal temperature is not proper.
The waste ink absorber is full.
The print head temperature exceeded the
specified value.
A problem occurred in writing to the
EEPROM.
The carriage did not move up or down
properly.
An error occurred in the AP motor during
purging operation.
An error occurred in the paper feed motor.
An error occurred in the paper feed cam sensor
during paper feeding from the front paper feed
cassette.
This error is also indicated when the waste ink
counter is 60% or more, and a paper jam
occurs.
The USB Host VBUS is overloaded.
An error occurred in the valve sensor during
cleaning.
The AD conversion value indicating the motor
driver temperature is not proper.
None of the ink tank position is detected.
The check sum value is incorrect in the ROM
1-8
- Logic board ass'y (QM2-
*1
2745)
- Paper feed motor (QK1-
1502)
- Purge unit (QM2-2299)
- Logic board ass'y (QM2-
*1
2745)
- Sheet feed unit (QM2-
2312)
- Logic board ass'y (QM2-
*1
2745)
- Ink absorber kit (QY5-
0147)
- Print head (QY6-0063)
- Logic board ass'y (QM2-
*1
2745)
- Logic board ass'y (QM2-
*1
2745)
- PR lift shaft ass'y (QL2-
0936)
- Sheet feed unit (QM2-
2312)
- Logic board ass'y (QM2-
*1
2745)
- Carriage lift sensor unit
(QM2-2678)
- Sheet feed unit (QM2-
2312)
- Logic board ass'y (QM2-
*1
2745)
- Purge unit (QM2-2208)
- Sheet feed unit (QM2-
2312)
- Logic board ass'y (QM2-
*1
2745)
- Sheet feed unit (QM2-
2312)
- Logic board ass'y (QM2-
*1
2745)
- Logic board ass'y (QM2-
*1
2745)
- Logic board ass'y (QM2-
*1
2745)
- Purge unit (QM2-2208)
- Logic board ass'y (QM2-
*1
2745)
- Platen unit (QM2-2313)
- Logic board ass'y (QM2-
*1
2745)
- Logic board ass'y (QM2-
*1
2745)
- Logic board ass'y (QM2-