Beko WM74135W Installation & Operating Instructions And Washing Guidance

Beko WM74135W Installation & Operating Instructions And Washing Guidance

Automatic washing machine

Advertisement

Automatic
washing machine
WM74135W

Advertisement

Table of Contents
loading

Summary of Contents for Beko WM74135W

  • Page 1 Automatic washing machine WM74135W...
  • Page 2 Please read this user manual first! Dear Customer, We hope that you get the best results from the product which has been manufactured in state-of-the-art plants and passed through a strict quality control procedure. Therefore, please read the entire user manual carefully before using the product and keep it as a reference for future use.
  • Page 3: Table Of Contents

    TABLE OF CONTENTS 1 Your washing machine Additional programmes ... . 18 Special programmes ....18 Overview ......4 Temperature selection .
  • Page 4: Your Washing Machine

    Your washing machine Overview 1- Power cable 5- Adjustable feet 2- Top panel 6- Loading door 3- Control panel 7- Detergent drawer 4- Filter cap 8- Drain hose...
  • Page 5: Technical Specifications

    Technical specifications Models WM74135W Maximum dry laundry capacity (kg) Height (cm) Width (cm) Depth (cm) Net weight (±4 kg.) Electrical input (V/Hz) 230 V / 50Hz Total current (A) Total power (W) 2200 Spin speed (rpm max.) 1300 1.00 Stand-by mode power (W) 0.25...
  • Page 6: Important Safety Instructions

    Important safety instructions • Do not force open the locked loading This section contains safety instructions door. The loading door will be ready that will help protect from risk of personal to open just a few minutes after the injury or property damage. Failure to washing cycle comes to an end.
  • Page 7: Installation

    Installation Refer to the nearest Authorised Service packaging reinforcement by pulling the Agent for installation of the product. To ribbon. make the product ready for use, review the information in the user manual and make sure that the electricity, tap water supply and water drainage systems are appropriate before calling the Authorized Service Agent.
  • Page 8: Connecting Water Supply

    Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again in the future. Never move the product without the Ensure that the cold and hot water transportation safety bolts properly connections are made correctly when fixed in place! installing the product.
  • Page 9: Adjusting The Feet

    • In case the hose is elevated after laying it on the floor level or close to the ground (less than 40 cm above the ground), water discharge becomes more difficult and the laundry may come out excessively wet. Therefore, follow the heights described in the figure.
  • Page 10: First Use

    install a 13 Amp fuse. Connect the blue (neutral) wire to the • The specified voltage must be equal terminal in the plug marked ‘N’ or to your mains voltage. coloured black. • Do not make connections via Connect the brown (live) wire to the extension cables or multi-plugs.
  • Page 11: Disposing Of Packaging Material

    Use an anti-limescale suitable for the washing machines. Some water might have remained in the product due to the quality control processes in the production. It is not harmful for the product. Disposing of packaging material Packaging materials are dangerous to children.
  • Page 12: Preparation

    Preparation Things to be done for energy saving Following information will help you use the product in an ecological and energy- efficient manner. Wash with sensitive, Washing water .short programmes temperature • Operate the product in the highest capacity allowed by the programme you have selected, but do not overload;...
  • Page 13: Correct Load Capacity

    The machine automatically adjusts the amount of water according to the weight of the loaded laundry. Follow the information in the “Programme and consumption table”. When overloaded, machine’s washing performance will drop. Moreover, noise and vibration problems may occur. Laundry types and their average weights in the following table are given as •...
  • Page 14: Other Cleaning Agents

    The amount of washing detergent to be used depends on the amount of laundry, the degree of soiling and water hardness. Read the manufacturer’s instructions on the detergent package carefully and follow the dosage values. • Do not use amounts exceeding the dosage quantities recommended The detergent dispenser may be on the detergent package to avoid...
  • Page 15 If the product does not contain a Using bleaches liquid detergent cup: • Select a programme with prewash • Do not use liquid detergent for and add the bleaching agent at the prewash in a programme with the beginning of the prewash. Do prewash.
  • Page 16: Tips For Efficient Washing

    Tips for efficient washing Clothes Light colours and Delicates/ Colors Dark colors whites Woolens/Silks (Recommended (Recommended (Recommended (Recommended temperature temperature temperature range temperature range range based range based based on soiling based on soiling level: on soiling level: on soiling level: level: 40-90C) cold-40C) cold-40C)
  • Page 17: Operating The Product

    Operating the product Control panel 1 - Programme Selection knob (Uppermost position On / Off) 2 - Display 3 - Delayed Start button 4 - Programme Follow-up indicator 5 - Start / Pause button 6 - Auxiliary Function buttons 7 - Spin Speed Adjustment button 8 - Temperature Adjustment button Preparing the machine Heavily soiled white cottons...
  • Page 18: Main Programmes

    2. Select the desired programme with • Cottons Eco the Programme Selection button. You may wash your normally soiled Programmes are limited with the durable cotton and linen laundry in this highest spin speed appropriate for programme with the highest energy and that particular type of fabric.
  • Page 19: Temperature Selection

    Before selecting this programme, select the desired spin speed and press Start / Pause button. First, the machine will drain the water inside of it. Then, it will spin the laundry with the set spin speed and drain the water coming out of them. If you wish to drain only the water without spinning your laundry, select the Pump+Spin programme and then select...
  • Page 20: Programme And Consumption Table

    Programme and consumption table Auxiliary functions Selectable temperature Programme range °C Cottons 2.30 1600 • • • • • • Cold-90 Cottons 1.54 1600 • • • • • • Cold-90 Cottons 0.85 1600 • • • • • • Cold-90 Cottons Eco 60**...
  • Page 21: Auxiliary Function Selection

    Auxiliary function selection laundry can be reduced. • Anti-Creasing Select the desired auxiliary functions This function creases the clothes lesser before starting the programme. when they are being washed. Drum Furthermore, you may also select or movement is reduced and spinning speed cancel auxiliary functions that are suitable is limited to prevent creasing.
  • Page 22: Starting The Programme

    displayed. “_” symbol will disappear Even if another programme is and the selected programme will selected with the Programme start. Selection knob while the Child Changing the Delayed Start period Lock is active, previously selected If you want to change the time during programme will continue running.
  • Page 23: Loading Door Lock

    The programme follow-up light of If the machine does not pass to the the relevant step during which the spinning step, Rinse Hold function machine was switched into the pause might be active or the automatic mode will flash. unbalanced load detection system 2.
  • Page 24: Maintenance And Cleaning

    Maintenance and cleaning Service life of the product extends and bellow with a clean piece of cloth after the frequently faced problems decrease if programme has come to an end. cleaned at regular intervals. Repeat Drum Cleaning process in Cleaning the detergent drawer every 2 months.
  • Page 25: Draining Remaining Water And Cleaning The Pump Filter

    2. Open the filter cap. If the filter cap is composed of two pieces, press the tab on the filter cap downwards and pull the piece out towards yourself. 1. Close the taps. 2. Remove the nuts of the water intake hoses to access the filters on the If the filter cap is one piece, pull the cap water intake valves.
  • Page 26 container is full, block the inlet of the hose by replacing the plug. After the container is emptied, repeat the above procedure to drain the water in the machine completely. c. When draining of water is finished, close the end by the plug again and fix the hose in its place.
  • Page 27: Troubleshooting

    Troubleshooting Programme cannot be started or selected. • Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). >>> Press and hold Start / Pause / Cancel button for 3 seconds to reset the machine to factory settings. (See "Canceling the programme") Water in the machine.
  • Page 28 Loading door cannot be opened. • Door lock is activated because of the water level in the machine. >>> Drain the water by running the Pump or Spin programme. • Machine is heating up the water or it is at the spinning cycle. >>> Wait until the programme completes.
  • Page 29 Machine does not switch to spinning step. • There might be an imbalance of laundry in the machine. >>> Automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the drum. Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment.
  • Page 30 Colour of the clothes faded. • Excessive laundry was loaded in. >>> Do not load the machine in excess. • Detergent in use is damp. >>> Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures. •...
  • Page 31 Detergent residue in the detergent drawer. • Detergent is put in wet drawer. >>> Dry the detergent drawer before putting in detergent. • Detergent has gotten damp. >>> Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures. •...
  • Page 32 Foam is overflowing from the detergent drawer. • Too much detergent is used. >>> Mix 1 tablespoonful softener and ½ l water and pour into the main wash compartment of the detergent drawer. Put detergent into the machine suitable for the programmes and maximum loads indicated in the “Programme and consumption table”.
  • Page 33: Guarantee

    • Beko disclaims any liability for • The labour costs of a Beko approved incidental or consequential damages. repairer to carry out the repair. • The guarantee does not in anyway diminish your statutory or legal rights.
  • Page 34: Service

    Otherwise please call the appropriate number above where service can be obtained at a charge. Should you experience any difficulty in obtaining service please contact the Beko Customer Help-Line.

This manual is also suitable for:

Wm74155lsWm74155lwWmp652w

Table of Contents